DLL Matériaux
Les métaux, les céramiques, les polymères, les composites sont les constituants des objets qui nous entourent. Mélanger des molécules, générer des microstructures et des formes contrôlées, les faire évoluer durant les procédés de fabrication sont des activités courantes de ce DLL. Les travaux permettent aussi de découvrir, mesurer et optimiser les propriétés des matériaux donc les performances des éléments et des structures finales.
Equipements
100N load cell for the Zwick uniaxial testing machines
10N load cell for the Zwick uniaxial testing machines
Ultimaker 2 Go 3D Printer; Build volume: 120x120x115mm
Cel robox dual material 3D printer. Build volume = 210x150x100mm
Custom Delta 3D printer
Keyence VHX-5000 optical digital microscope with motorized xyz stages. 20-200x and 100-1000x objectives with various lighting options.
Anton Paar NHT2 Nanoindenter with Berkovitch tip.
Anton Paar MCR102 modular compact rheometer. Cone plate and parallel plates setups.
Zwick Z100 uniaxial testing machine with extensometer and various setups: flat wedge grips, flexion, compression, etc. 10kN and 5kN optional load cells.
Zwick Z010 uniaxial testing machine with extensometer and various setups: flat wedge grips, flexion, compression, etc. 5kN optional load cell.
Mobile Zwick Z5.0 uniaxial testing machine with digital strain measurement and various setups: flat wedge grips, compression, etc.
Guides d’utilisation
Testing machines
Keyence microscope
Composite manufacturing
Nanoindentation
Access conditions to specific equipment for research/projects (testing machines -100, 10 and 5kN-, precision load cells, nanoindenter, rheometer, 3D printers, Keyence numerical optical microscope):
- DLL MAT agreement
- Specific training on the equipment + signature of the corresponding form
- Booking on https://reservations.epfl.ch for “DLLMAT – xxx” (reservation rights are granted for persons fulfilling points 1 and 2)
- Fill the logbook for each session
Cours | Description | Cours | Description |
MSE-103 | Technologie et pratique des matériaux | MSE-231 | Ceramics, structures and properties + TP |
ME-380 | Méthodes expérimentales en biomécanique | ME-410 | Mechanical product design and development |
MSE-236 | Metals and alloys + Laboratory Work | ENV-202 | Microbiologie pour l’ingénieur |
MSE-340 | Polymer composites + Laboratory Work | ME-332 | Mécanique vibratoire |
MSE-360 | Science des polymères | MSE-656 | CCMX Advanced Course – Instrumented Nanoindentation |