Master’s Thesis/Semester Projects Proposals
We have updated the thesis/semester project offers. Please e-mail the listed contacts directly.
Please tell us your motivation to the specific project, your skillsets and past experiences + something that shows that (CV, website, photos, videos, github, etc), and your transcript.
Students from all research backgrounds are welcome – for example, mechanical engineering, bioengineering, computer science, materials etc.
Updated May 2024
Vision-based Configurations Estimation of Soft Continuum Manipulators (Thesis)
Summary: Soft continuum manipulators, like those modeled after elephant trunks, offer greater safety and flexibility because they can deform to absorb impacts and have virtually unlimited movement possibilities. These features make them ideal for interactions in unstructured settings. However, controlling these manipulators precisely is challenging due to their extensive deformability. The piecewise constant curvature model helps in effectively sensing and managing their movement.
For configuring soft manipulators, various sensing systems including external motion capture and internal IMU-based systems are used, which show good accuracy but have limited sensing capabilities. Vision-based systems, potentially offering unlimited sensing capabilities, are expected to provide more accurate configuration reconstructions. Deep learning techniques are useful for identifying object shapes, and this study aims to develop a neural network to define and reconstruct the configuration of a specific soft robot named “Helix v1” based on these identified shapes, even in visually obstructed, unstructured environments.
Link to proposal: https://drive.google.com/file/d/1-bAx0HVkEPJ4X6GTsJZVfePo3m5Jr6XJ/view?usp=drive_link
Link to previous soft sensing research: https://drive.google.com/file/d/1crSa5Z6a9zsTq8MjV8qEY5D2P5GE0Q0i/view?usp=drive_link
Workload: 30% hardware, 70% software
Contact: Guanran Pei ([email protected])
Control / Learning / (Haptic) teleoperation on a dexterous robotic hand (Thesis Project)
TL;DR:
A thesis project to perform some control/learning/teleoperation using the ADAPT Hand v2. Details and directions up to discussion.
Summary:
The ADAPT Hand v2 is an anthropomorphic robotic hand developed in this lab. However, the control of such a hand for robotic tasks are non-trivial given the complexity of manipulation and the robot itself.
Recently the hand has acquired tactile sensors in its fingers and thumb, and a teleoperation system using the Apple Vision Pro headset (See video).
We have several projects lined up with all potential to roll them out as master thesis projects.
1. Shared control using tactile feedback with the sensorized robotic hand to assist kinematics based teleoperation.
2. (Potentially bimanual) Dexterous manipulation leveraging immitation learning through real world data collection.
3. Using haptic feedback to control not only the position but also the force of the interaction of the robot hand.
If you also have ideas related to this we can discuss!
Skills involved / would be nice if you are confident or touched upon even a few:
– Data collection, processing
– Robotic systems integration (not really to integrate systems but have experience and intuition on working with complex systems with multiple processes and parts etc)
– Robotic hardware (in the sense that you will be working with a physical robot)
– Programming with Python
Contact: Kai Junge ([email protected])
Whegs for our GOAT (Thesis or Semester Project)
Summary: Our GOAT(Good Over All Terrain) robot would be delighted to obtain a set of new compliant wheel-legs to increase its operational range, robustness and efficiency. Your project involves evaluating existing compliant wheel-leg mechanisms and designing and prototyping a compliant wheel-leg mechanism. Please apply if you have prior experience in mechanism design, prototyping with non-rigid, compliant materials and are fascinated about mobile, outdoor robots.
Workload: 20% Literature research, 50% Prototyping and design, 30% Experimental validation ( these are arbitrary percentages 😉 )
Contact: Max Polzin ([email protected])
Parachute for our GOAT (Thesis or Semester Project)
Summary: Our GOAT(Good Over All Terrain) robot would be delighted to augment its flying capabilities with gliding as gliding offers increased efficiency for controlled aerial descend. For this, it is your task to adapt and equip our GOAT with an RC parachute. Please apply if you have prior experience in rapid prototyping and servo control and are fascinated by flying/gliding robots.
Workload: 30% Prototyping and design, 30% Control, 40% Experimental validation ( these are arbitrary percentages 😉 )
Contact: Max Polzin ([email protected])
Drowning our GOAT (Thesis or Semester Project)
Summary: Our GOAT (Good Over All Terrain) robot can swim, fly and drive. It is time for it to venture into new realms and go diving. Your task will be to waterproof the GOAT’s electronics, design a prototype buoyancy system and showcase the feasibility of underwater locomotion. Please apply if you have prior experience working with mechanical prototyping and working with water and electronics.
Workload: 15% Literature research, 55% Prototyping and design, 10% Control, 20% Experimental validation ( these are arbitrary percentages 😉 )
Contact: Max Polzin ([email protected])
Tendon-Driven Lightweight Robotic Arm for Agricultural Applications (Semester)
Summary: Develop a tendon-driven 7-DoF robotic arm with two-to-three end effectors used in harvesting, such as scissors and grippers. The goal is to minimize joint weight and inertia generated during fast motion. It can be based on the current robotic arm we have and modify it accordingly. Workload: 90% Design, 10% Control
Contact: Paul Cheng ([email protected])
Motion Stabilization of a floating robot (Semester)
Summary: Analyze and mitigate vibrations caused by a robot moving on a rope. Develop a control approach and mechanical damper to reduce oscillation or explore other methods. The closest scenario is similar to [ https://doi.org/10.1016/j.engstruct.2022.115527] or cable cart, but on a smaller scale with a robot involved. Simulation with an appropriate control method may suffice. The main goal is to stabilize the real robot in its desired position and orientation.
Workload: 60% Modeling and Control, 40% Hardware Design.”
Contact: Paul Cheng ([email protected])
Analyze and cancel out vibrations caused by the robot moving on a rope.
Develop a control approach and mechanical damper to reduce oscillation (or explore other methods). The situation is similar to but on a much smaller scale and with a robot on it. Simulation with a proper control method might be sufficient. The final goal this the stabilize the real robot in the desired position and orientation.
Workload: 60% Modeling and Control, 40% Hardware Design
Contact: Paul Cheng ([email protected])
Vision and Motion Training for Harvesting Robotic Arm (Thesis)
Summary: We have a mobile robotic arm designed for harvesting strawberries. We aim to implement a learning-based approach to navigate the robot arm to reach the target position and perform harvesting. Motion data will be captured through teleoperation. The goal is to explore ways to expedite the harvesting process.
Workload: 70% Programming, 30% Hardware Design
Contact: Paul Cheng ([email protected])
Control a soft arm with its twin (Semester/Thesis)
Summary: The inverse kinematics of a soft arm are complex and costly for real-time control. However, the physical world acts as an unparalleled simulator in terms of speed and realism. This is why we use a reduced-scale physical twin to control a larger-scale soft arm robot. Naturally, there are some discrepancies between the two arms, which is precisely what we aim to resolve.
Workload: 90% Programming, 10% Hardware Design, 20% Experimental test, 60% Programming for control, 20% Modeling
Contact: Qinghua Guan ([email protected])
3D printed sensor inspired by the human skin (Semester/Thesis)
Background: Human Skin Sensing
Human skin sensing relies on an intricate network of receptors and neurons embedded within the skin. These receptors vary in their functions, structures, arrangements, and receptive fields. The neural structure not only transmits sensory signals to our brain but also preprocesses this information. It can even influence human behavior through low-level conditioned reflexes. Together, these elements shape our perception of the environment.
Project Goal:
The aim of this project is to develop a multi-functional sensor system that integrates multiple receptors and reconfigurable neurons. This system will investigate the synergistic effects of different sensors and neurons working in concert.
Workload: 70% Hardware Design, 20% Programming for control, 10% Modeling
Contact: Qinghua Guan ([email protected])
Simulation or physics modeling for underwater swimming soft robots using (Thesis)
Summary: Simulating underwater soft structures is challenging. The field has not been explored as much compared to computational fluid dynamics analysis of rigid structures. We have a squid-inspired swimming robot that swims using its 4 soft tentacle arms. We would like to close the simulation-to-reality gap for this robot. Please apply if you have strong simulation or physics-modeling skills.
Workload: Simulation 80%, Analysis 20%
Contact: Nana ([email protected])
Exploring the embodiment of a soft sensor (Semester/Thesis)
Summary: We want to explore how the controllability of robots change if we have different embodiments of a soft sensor. This project will involve fabrication of a soft strain sensor and testing. Please apply if you have strong mechatronics and embedded systems skills.
Workload: Sensor fabrication 30%, Experiments and system integration 70%
Contact: Nana ([email protected])
Developing a buoyancy bladder for soft swimming robots (Semester/Thesis)
Summary: We have a number of soft swimming robots that need buoyancy control. Currently they are attached to a big floating platform. Your job would be to develop a buoyancy bladder that can be integrated to an existing swimming robot. If you are good at hardware design and fabrication and have previous underwater mechatronics experience, please apply.
Workload: Hardware design and testing
Contact: Nana ([email protected])
Arts and Soft Robotics (Semester/Thesis)
Summary: This is an open-ended project. We want you to design and build an interactive arts display using soft robotic components or ideas. The underlying aim is to delve into the potential of soft robots in the entertainment field or the potential for them to positively affect human life. Once the piece is built, we will conduct user studies on the human-robot interaction. Creative individuals with prior mechatronics and building experience are welcome.
Workload: Design and Fabrication 70%, User studies and analysis 30%
Contact: Nana ([email protected]) Please have a rough idea of your arts display before contacting!
Chewing robot mechanism design and control
Summary: The process of chewing food is achieved through the up and down movement of the jaw and the shearing movement of the teeth. Develop a simple chewing robotic system, including mouth, jaw and tooth. The goal is to simulate the mechanical movements of humans chewing by robot, and monitor this process by sensors and camera.
Workload: 50% design and fabrication, 50% control
Contact: Benhui Dai ([email protected])
Pneumatic soft robotic actuators for healthcare (Semester/Thesis)
Summary: Soft robots are made from highly flexible materials that mimic the properties of living organisms, which allows them to adapt to complex environments and friendly interactions. In this project, our goal is to learn the principles of soft robotics, focusing on the structural design of novel actuators, their fabrication with curing and 3D printing, and their control with pneumatic devices.
Workload: 40% Design and fabrication, 30% Hardware, and 30% Control
Contact: Benhui Dai ([email protected])
Anthropomorphic robotic hand augmentation and design space exploration (Thesis)
Summary: With our approach for parametric design and modular actuation, we can create skeletal robotic hands rapidly (<1 day) with high functionality and dynamic capabilities. We want to explore how the hand behaviours evolve with the morphology by replicating and generating and testing diverse hand designs, including primate hands. Additionally, the project would involve augmenting the hand with naturalistic features, such as a soft skin and tactile sensors. You project would involve mechanical design, 3D printing/rapid prototyping, experiment design and analysis. Please apply if you are interested in robotic manipulation and developing integrated systems.
Workload: 50% design and fabrication, 20% modelling and control, 30% experiment design and analysis
Contact: Kieran Gilday ([email protected])
Implementation and test of a morphology agnostic controller for legged robots using Reinforcement Learning and Generative AI (semester)
Summary : The goal of this project is to adapt and transfer a controller from one morphology to another. Supposing that we have a controller for a given design and task, how can we generate a controller for another design? Current approaches merely retrain the controller in model-free settings or use a different model corresponding to the new design. This is very data expensive and does not re-use anything from what we already have. A main issue in the controllers that are designed in Robotics now is that they are always very specific, single-use, disposable, and are not reusing prior knowledge efficiently and exploiting other controllers that we have on hand.
The proposed approach is to use Reinforcement Learning to adapt a controller using a Generative Model, more specifically a GAN. Conditioned on the morphology and joint locations, the GAN could generate adapted reference trajectories for the target design.
Apply if you are interested in learning about RL, using RL gyms, generative models. You should have coding experience in Python, and some basic understanding of Deep Learning.
workload: 80% implementation of python code and tests, 20% literature review, research for modifications
Contacts: Arnaud Klipfel ([email protected])
Data collection and processing of plant electro-physiological signals (summer project/semester)
Summary : Plants respond to external stimuli in different ways, these responses can be measured or detected using electro-physiological sensors. If proper signals are collected and suitable models are built, it would be possible to use plants as sensors. Using electrophysiological sensors your goal will be to set up an experimental platform to record these signals and collect a dataset in different light conditions. If time allows, we will build a generative model to predict the light condition changes based on the plant internal state.
Workload : 30% set up of sensor, and plants, 30% data collection, 40% result analysis
Contacts: Arnaud Klipfel ([email protected])
Wearable devices to enhance sensations for robotic hand (Semester/Thesis)
Summary: Wearable devices and smart gloves are revolutionizing human-machine interaction and robotic control. This project aims to develop wearable devices to enhance the sensing capability of robotic hands. Our goal is to gain in-depth understanding of human behaviour and human-machine-environment interfaces. The focus will be on innovative sensor integration (force, bending, temperature, proprioception, etc.), comfortable ergonomic design (wearables like gloves for both human and robot), and real-time data transmission and interaction with robotic hands.
Workload: 40% Sensor/actuator design and fabrication, 30% wearable device integration and development, and 30% Software and data analysis
Contact: Benhui Dai ([email protected])
Building Adaptive Controller for Rolling Robot (Summer Project)
Summary: The Rolling Robot project focuses on the development of a flexible and soft 1-D locomotion platform designed to navigate complex terrain using adhesive locomotion. To enhance adaptivity in locomotion, we aim to implement sensors and controllers capable of detecting upcoming terrain geometry and ensuring stable locomotion. Your role will involve modifying the design of the existing rolling bot, designing controllers for adaptable locomotion, and conducting robotic experiments to validate performance.
Workload: 20% Prototyping and design, 50% Experimental validation and data collection, 20% Modeling and Simulation
Contact: Sareum Kim ([email protected])
Cartesian Robots in a wet lab: tracking bacteria growth (Thesis/Semester)
Summary: To lower the access barrier to lab automation we developed a cartesian robot that can pick and place laboratory labware such as petri dishes and, by using computer vision, can assess how different bacteria colonies grow. The robot is currently deployed in a real wet laboratory at UNIL. The candidate will implement new computer vision strategies to track bacteria growth and will improve software and hardware components.
Workload: 40% hardware, 60% Software
Resources: https://www.epfl.ch/labs/create/create-lab/lab-spin-offs/ + more upon request
Contact: Vincenzo ([email protected]) & Francesco (francesco.stella@epfl@ch)
Automating light scattering (Semester)
Summary: Light scattering is a technique used to examine the unique properties of protein solutions that don’t behave as expected. To do this effectively, scientists need to test the proteins at various concentrations. However, manually adjusting these concentrations can be a long and error-prone process. This project aims to simplify this task by automating the process of mixing protein samples using a dual syringe system. The system will be built in the course of the project using existing technology that is already used in the lab.
More info will be given upon request.
Workload: 25% Mechanical design, 25% Fabrication, 50% Experimental
Contact: Vincenzo ([email protected])
Autonomous Navigation Integration in Cleaning-Bot for Efficient Path Cleaning (Semester)
Summary:
In the framework of the Swiss CAT+ project, we have developed a concept for the transfer of chemical samples based on a fleet (or swarm) of mobile mini-robots developed locally with ROS and designed around the typical shape of the sample. They are equipped with Ultrasonic sensor to measure their position in the lab. We plan to have about 10 of these mini-robots running in a track suspended above the scientific instruments. The track and the robots already physically exist. The transfer between the scientific instruments and the mini-robots in their track will be handled by 6-axis cobots (Universal Robots 5e or 10e) assisted by a set of industrial cameras for precise positioning.
The objective of this project is to implement an already developed navigation algorithm, originally designed for a similar robot, into the Cleaning-Bot. This integration aims to utilize the Cleaning- Bot’s existing sensor systems to achieve efficient and autonomous cleaning along a predefined track. The challenge lies in adapting and optimizing this existing navigation algorithm to fit the specific hardware configurations and cleaning requirements of the Cleaning-Bot.
OSS. Previous ROS knowledge is highly desirable
Deliverables:
- a) Algorithm Adaptation: Study the existing navigation algorithm and understand its compatibility with the Cleaning-Bot’s sensor systems.
- b) Software Integration: Implement the navigation algorithm into the Cleaning-Bot’s software framework, ensuring seamless integration with its hardware.
- c) Customization and Optimization: Customize the algorithm parameters to optimize the Cleaning-Bot’s path planning, obstacle avoidance, and area coverage capabilities.
- d) Testing and Validation: Conduct extensive testing in various environments to validate the performance of the Cleaning-Bot with the integrated navigation system. Adjust and finetune the algorithm based on real-world feedback and performance data.
Contact:
Edy ([email protected]) & Vincenzo ([email protected])
Development of a Battery Exchange System Using a 6-Axis Robot(Semester)
Summary:
In the framework of the Swiss CAT+ project, we have developed a concept for the transfer of chemical samples based on a fleet (or swarm) of mobile mini-robots developed locally with ROS and designed around the typical shape of the sample. They are equipped with Ultrasonic sensor to measure their position in the lab. We plan to have about 10 of these mini-robots running in a track suspended above the scientific instruments. The track and the robots already physically exist. The transfer between the scientific instruments and the mini-robots in their track will be handled by 6- axis cobots (Universal Robots 5e or 10e) assisted by a set of industrial cameras for precise positioning.
This project aims to develop a prototype system that automates the battery exchange process for a mobile robot using a 6-axis cobot from Universal Robots. The current mobile robot uses a fixed battery system that requires manual replacement upon discharge. An automated system for battery exchange would significantly enhance the robot’s operational efficiency.
OSS. Previous ROS knowledge is highly desirable
Deliverables:
- a) Design of Removable Battery Module: Develop a modular battery system similar to those used in hand drills, which can be easily detached and attached to the robot.
- b) Development of Exchange Mechanism: Utilize a 6-axis Universal Robot to create a mechanism that can autonomously remove a discharged battery from the mobile robot and replace it with a charged one.
- c) Programming and Automation: Program the Universal Robot for precise movements required for the battery exchange process.
- d) Testing and Refinement: Test the prototype under various scenarios to ensure reliability and safety. Refine the system based on feedback.
Contact:
Edy ([email protected]) & Vincenzo ([email protected])
6-month paid robotics internship opportunity
More information here: Internship In Wind Turbine Control
Contact: [email protected]
[closed] Designing a modular robot for simulating cell growth and division in fluid environments (Thesis)
Summary: This project aims to develop modular robots that simulate cell growth and division using a combination of soft materials and/or polymers. The focus will be on designing and fabricating these modular robotic units, intending to replicate the fundamental processes of cell development. Operating in a fluid environment, such as water, the robots will emulate the dynamic nature of real cells. The project requires significant mechanical design and fabrication skills to ensure the successful construction of these robotic units. The research outcomes have the potential in offering new insights into cellular behavior and inspiring innovative technological applications.
Workload: 50% Mechanical design, 50% Fabrication
Contact: Nana ([email protected])
Examining collaboration between multiple Cartesian robotic arms (Thesis)
Summary: To accomplish diverse manipulation tasks in environments like laboratories or kitchens, the use of dual robotic arms becomes essential. While programming and synchronizing 6-DOF articulated robotic arms pose challenges, employing simpler yet versatile systems like Cartesian platforms often suffices for numerous tasks. The lab’s current two-arm Cartesian setup has demonstrated high reliability in automating lab tasks such as unscrewing caps, pipetting, and dispensing.
This project aims to explore collaboration beyond two cartesian robotic arms. Investigating horizontal or vertical stacking methods can prove viability of a ‘continuous manufacturing line’, while examining how multiple robotic arms (3, 4, or more) can share the same workspace can prove beneficial for execution of highly complex tasks.
Your responsibilities will involve testing various stacking concepts, with real-life demonstration of the best configuration across a series of tasks. This project will require design and building of additional arms and end-effectors but will also require robot-arm programming and exploration of viable control methods. This project has high potential for publication in robotics journals.
Link to previous research: https://drive.google.com/file/d/1E-8BRuCfi-gVaQx2MU9WtCLMqsCOznSF/view?usp=sharing
Link to videos:
https://drive.google.com/file/d/1E-fPgmKiFfA_UAA22IgYzuZ2xN6rB_tC/view?usp=sharing
https://drive.google.com/file/d/1E-zj12UVV84gPPo1B9oSZM7rDngKlSxB/view?usp=sharing
Workload: 50% hardware, 50% software
Contact: Stefan ([email protected])
Autonomous Tethered TriPod for Enhanced Biomass Quantification in Dense Forests (Thesis)
Summary: Accurate quantification of forest biomass is essential for understanding carbon sequestration and ecosystem health. Traditional methods, however, are often labor-intensive and subject to human error. This project aims to design and implement an autonomous motorized tripod system capable of traversing along a tether and utilizing an onboard laser scanner for precise biomass measurements. The system will feature ground anchoring for stability during data acquisition and a roller mechanism for seamless repositioning. You will be responsible for developing the mechanical design of the tripod, integrating a laser scanner, and programming the movement and data processing algorithms. The project will culminate in field trials to demonstrate the system’s efficacy and potential publications in leading environmental and robotics research outlets.
Workload: 70% Mechanical design and integration, 30% Field testing
Contact: Max ([email protected])
Enhancing passive walking in the PAWS quadruped with embodied contact sensing (Thesis)
Summary: Biological systems display an incredible diversity in behaviors and motion capabilities. It has been shown that for most tasks, only a subspace of the possible poses is used. We propose to exploit minimal feedbacks from contacts at the paws to develop bio-inspired controllers that exploit the embodied passive properties of the PAWS robot. In this thesis you will start by integrating contact sensors in the PAWS quadruped robot, and then link the sensor readings into minimal control inputs to achieve diverse yet stable locomotion strategies. In the thesis we will continue optimizing the design, manufacturing and control of a biomimetic cheetah with a reduced set of actuators. Potential publication of results in top Robotics venues.
Link to prior research: https://www.researchsquare.com/article/rs-3195331/v1
Workload: 70% Mechatronics design, 30% Control design
Contact: Francesco ([email protected]) & Sudong ([email protected])
Exploiting dynamics for fast soft robots (Thesis)
Summary: Soft robots are celebrated for their ability to efficiently store energy in their bodies, and efficiently releasing them during repetitive motions . We propose to exploit this capability to generate the most energy efficient manipulator, able to perform highly dynamic movements with minimal energy consumption. In this thesis you will start by estimating the eigenfrequecies of the Helix manipulator thanks to the embedded proprioceptive sensing. You will then merge the eigenfrequency excitations into a higher level controller to perform efficient periodic motions. Potential publication of results in top Robotics venues.
Link to prior research: https://www.nature.com/articles/s44182-023-00004-7
Workload: 80% control, 20% Mechatronics design
Contact: Francesco ([email protected]) & Qinghua ([email protected])
Soft arm with high load capability: designing, building and modeling (Thesis)
Summary: Leveraging the designability of architectured material/structure, develop a soft manipulator with inertia compliance and also high load capability
-3D Printing of architected arm structure with deliberate mechanical properties.
-Build a tendon-driven robot with soft structure and a rotating basement
-Build the open-loop control of the robot based on mechanical modeling
Workload: 60% hardware, 40% Software
Contact: Qinghua ([email protected])
Soft sensor with multi-mode and programmable sensing (Thesis)
Summary: Develop a sensor with multi-mode sensing(shearing/compression) ability based architectured lattice material. Lattice materials have various mechanical properties. By involving different mechanical responses of lattice materials, the sensor can achieve different sensitivity to different .
-Design and 3D Printing of architected lattice foams
-Design and build capacitive (or resistance/optical ) sensors （including the PCB design for the signal collecting） with programmed lattice structures to achieve different sensing property and modes in different areas.
-Design and build capacitive (or resistance/optical ) sensors （including the PCB design for the signal collecting） with multi-mode sensing with shearing, twisting and compression based on multi-layer lattice structures.
Workload: 80% hardware, 20% Software
Contact: Qinghua ([email protected])
Electrostatic adhesion sheet and Characterization (Thesis)
Summary: Fabricate a centimeter-scale electrode and develop a circuit to generate adhesion force (for grasping applications) via electrostatic.
– Make the circuit to generate high voltage and optimize the circuit in compact
– Design patterns for the electrode
– Characterize normal and shear forces according to the input voltage
Workload: Fabrication (20%), Electronics (50%), and Experiment (30%)
Contact: Sudong ([email protected])
Design soft skin with special patterns for adhesive force (Thesis)
Summary: Design soft skin for a rigid robot hand having electrostatic adhesion sheet. We are going to develop patterns and structures of the skin to amplify or optimize electrostatic effects for manipulation.
– Design and make soft skin with silicone
– Embed the electrostatic adhesion sheet
– Test and verify the effects of the patterns and electrostatic forces in grasping applications
Workload: Design (35%), Fabrication (35%), and Experiment (30%)
Contact: Sudong Lee ([email protected])
Design and control of miniature continuum robots for neurosurgery (Thesis)
Summary: Soft continuum robots can reduce surgery invasiveness with safer approaches and low force interactions. Following conversations with practicing neurosurgeons, we want to develop a novel robot combining concentric tube robots and tendon-driven continuum robots for a simple to control system with guaranteed safety during operations. This project involves:
- Developing scaled prototypes using 3d printing and other fabrication techniques
- Developing position/tendon actuation and control systems
- Characterising the system using our sensorised brain phantom
Workload: Design/fabrication (50%), Control systems (40%), and Experiment (10%)
Contact: Kieran ([email protected])
[closed] Scaling up underwater swimming soft robots (Thesis)
Summary: Sea creatures exhibit amazing maneuverability underwater. Many soft fish-like robots exist that are capable of navigating underwater complex environments. However, scaling these robots up to larger sizes pose challenges and have been relatively unexplored. Using materials such as carbon fiber rods, the goal of this thesis is to create a large (>2m), light-weight, soft swimming robot and then to analyze performance capabilities.
Workload: Design 20%, Fabrication 40%, and Experiment/Analysis 40%
Contact: Nana ([email protected])
[closed] Simulation for underwater swimming soft robots using DiffPD (Thesis)
Summary: DiffPD is a fast differentiable simulator for soft-body learning and control applications. In this thesis, you will create a simulation for soft underwater swimming robots using DiffPD which will help close the simulation-to-reality gap with our robot hardware.
See here for more information about DiffPD: http://diffpd.csail.mit.edu/
Workload: Simulation 80%, Analysis 20%
Contact: Nana ([email protected])
[closed] Large-scale data capture and online optimization of structures in water (Thesis)
Summary: Previously, we have used a robot scientist to automatically optimize a paper airplane shape so it flies a specified distance when thrown. Robot scientists are particularly useful in that they can collect a lot of data autonomously. In a similar way, we want to see if we can create a closed-loop platform where we gather feedback from fluid dynamics using PIV to optimize a shape underwater autonomously. Your thesis will involve hands-on setup creation, experiments, and optimization.
See a related paper here: https://www.nature.com/articles/s41598-023-31395-0
Workload: Design/Fabrication 40%, Experiment 40%, Optimization 20%
Contact: Nana ([email protected])
Concentric tube robot for neurosurgery (Thesis)
Summary: Developing a miniaturised concentric tube robot that has additional tendon driven steering at the tip for various neurosurgery applications.
Workload: 50% Design and fabrication, 50% Control and Modelling
Contact: Kieran Gilday ([email protected])
Hand Evolution Analysis (Thesis)
Summary: Using our single print approach for hand manufacture, we want to explore how the passive properties and morphology has evolved with species/time. To do so, this project will involve creating benchmarking methods and analysis, and exploring different hand designs and structures.
Workload: 50% Experiment design and analysis, 50% Fabrication and design
Contact: Kieran Gilday ([email protected]) & Cheng Pan ([email protected])
[Temporarily closed] RoboCup @Home MAKE Project — Software Engineering (Semester)
Summary:
RoboCup @Home is a MAKE Project where we aim to build a home service robot to participate in the international robotics competition: RoboCup. The aim of this project is to work on the software systems of the robot. Software tasks will be around navigation and behavioural tree of the robot.
In both cases, the student should have some level prior experience in relevant fields, as the project requires practical knowledge to integrate state of the art technologies. Specific project directions will be discussed with each student based on their interest and past experience.
Workload:
– 80% technical development / robotic integration
– 20% decision making and planning of the project with other team members
Contact:
Max Polzin ([email protected])
Synergy Based Quadruped (Thesis)
Summary: In previous projects, we have used the concept of motor synergies to create an underactuated quadrupedal robot that exploits passive behaviours for robustness. In this project we aim to improve the mechatronics to improve the walking speed, and also investigate further the actuation and emergent properties.
Workload: 50% Mechatronics and design, 50% Control
Contact: Francesco Stella ([email protected])
Closed-loop Control of Soft Robotic Manipulators (Thesis)
Summary: Developing closed-loop control algorithms for soft robotic manipulators using IMU data. This will leverage our 1m long compliant robot arm that has a large workspace and range of options.
Workload: 80% Control. 20% Hardware
Contact: Francesco Stella ([email protected])
Electrostatic adhesion finger (Thesis)
Summary: Develop the electronics and electrodes to integrate electroadhesion into robot fingers. The project will then explore the characterization of this, and how it can be combined with other mechanical properties (e.g. locking/jamming), and how it can be used to aid control and interactions with objects.
Workload: 50% Electronics, 50% Mechanism design & implementation
Contact: Sudong Lee ([email protected])
Elastic Morphing Wheel to Operate in Extreme Environments (Thesis/Semester Project)
Summary: Design and implement an elastic morphing wheel that improves our GOAT (Great Over All Terrain) robot’s ability to safely operate in challenging natural terrains in extreme environments.
Workload:70% Design and fabrication, 30% Experiments
Contact: Max Polzin ([email protected])
Exploiting Bistability to Operate in Extreme Environments (Thesis/Semester Project)
Summary: Design and implement a mechanism that allows our GOAT (Great Over All Terrain) robot to morph its shape to safely operate in challenging natural terrains in extreme environments.
Workload:70% Design and fabrication, 30% Experiments
Contact: Max Polzin ([email protected])
[closed] Developing distributed tactile sensing on a robot hand (Thesis)
Summary: Ditributed large are tactile sensing is essential for robust manipulation. Starting from our anthropomorphic robot hand, this project will explore the mechatronic integration of tactile sensors receptors into the hand, and investigate how this can be used for sensory motor control.
The project will begin from this custom dexterous hand, and modify the design to integrate hall effect sensors repurposed for tactile sensing. This work will lead to one of the world’s first dexterous hand with integrated distributed sensing.
The student should have a good understanding and intution/experience on:
- Mechanical design using FDM 3D printing
- Electrical design and IC components
- Simple PCB design
- Low level signal processing
Workload: 80% Mechatronics integration, 20% Sensory Motor Control
Contact: Kai Junge ([email protected])
[closed] Cartesian Robots in a wet lab: tracking bacteria growth (Semester)
Summary: To lower the access barrier to lab automation we developed a cartesian robot that can pick and place laboratory labware such as petri dishes and, by using computer vision, can assess how different bacteria colonies grow.
The robot will be deployed in a real wet laboratory at UNIL. The candidate will finish to implement the computer vision program following the needs of the UNIL laboratory and will deploy the robot to study what can be improved software and hardware wise.
Workload: 40% hardware, 60% Software
Contact: Vincenzo Scamarcio ([email protected]) & Francesco Stella (francesco.stella@epfl@ch)
[closed] Wireless Charging System for Autonomous Mobile Platforms (Semester)
Summary: In the framework of the Swiss CAT+ project, we have developed a concept for the transfer of
chemical samples based on a fleet (or swarm) of mobile mini-robots developed locally with ROS. The project aims to develop a charging system for these mini-robots, utilizing wireless charging
technologies, such as inductive coils. The mini-robots would be able to charge their batteries on
several stations situated on key positions on the track.
Workload: 70% Hardware, 30% Software
Contact: Vincenzo Scamarcio ([email protected]) & Edy Mariano ([email protected])
[closed] Robot Laboratory Cleaner (Semester)
Summary: In the framework of the Swiss CAT+ project, we have developed a concept for the transfer of
chemical samples based on a fleet (or swarm) of mobile mini-robots developed locally with ROS. The project aims for the enhancement and integration of our existing mini-robot to create an
autonomous cleaning robot, adept at removing dust on the dedicated track. This enhanced robot
will take advantage of its existing navigation and sensory capabilities, enabling seamless operation
without disrupting the routines of other robots.
Workload: 80% Hardware, 20% Software
Contact: Vincenzo Scamarcio ([email protected]) & Edy Mariano ([email protected])
[closed] Rescue-bot (Semester)
Summary: In the framework of the Swiss CAT+ project, we have developed a concept for the transfer of
chemical samples based on a fleet (or swarm) of mobile mini-robots developed locally with ROS. The project aims for the enhancement and integration of our existing mini-robot to create an
autonomous breakdown-robot, designed to promptly detect and relocate any malfunctioning robots
to a designated safe zone.
Workload: 80% Hardware, 20% Software
Contact: Vincenzo Scamarcio ([email protected]) & Edy Mariano ([email protected])
[closed] Hydrodynamic simulation of a swimming robot (Thesis/Semester)
Summary: Developing a hydrodynamic simulation of a soft swimming robot using commercial software or other.
Workload: 100% Simulation
Contact: Nana Obayashi ([email protected])
[closed] Cartesian Robots in a wet lab: tumors pick & placing & analysis (Semester)
Summary: Working toward the goal of personalized healthcare, we developed a low-cost cartesian robot that can efficiently pick and place mice cancerous tissue explants, by using computer vision and innovative pneumatic grippers.
The robot is ready to be deployed in a real wet laboratory at EPFL to assess its performance. The candidate will study the architecture of the existing robot to propose possible software and hardware changes and will evaluate its performance while executing the tissue explant workflow in a real biological laboratory.
Workload: 30% Hardware, 70% Software
Contact: Vincenzo Scamarcio ([email protected]) & Francesco Stella (francesco.stella@epfl@ch)
Design and manufacturing of a fully-fledged soft manipulator for in-house care (Thesis)
Summary:
In this thesis you will optimize the design of the soft manipulator presented in https://arxiv.org/pdf/2211.10188.pdf , to target real-world applications, such as in-house care. The goal of the thesis is to build a bigger (around 3m long), stronger, yet safe soft manipulator, equipped with embedded sensors and actuation. We look for students passionate about rapid prototyping, CAD and eager to build the new generation of soft robots. Potential publication of results in top Robotics venues.
Workload:80% design optimization and manufacturing, 20% performance evaluation and demonstration
Contact:
Francesco Stella ([email protected])
Understanding human preferences on manipulators in human-robot interaction (Thesis)
Summary:
Robots are still largely confined to controlled environments, far from the human reach. In the last decades the research community put a strong effort to design robots able to interact safely with humans. However, limited study have evaluated the human preference when it comes to close human-robot interactions. In this thesis you will study and compare the human acceptance between traditional rigid robots, collaborative robots, articulated and continuum soft manipulators with real-world tests and user-studies. We search for students eager to answer the question: what kind of robot do we really want around?
Workload: 30% Experiment design, 40% User study, 30% Data analysis.
Contact:
Francesco Stella ([email protected])
Animal behavior to robot design: a methodological framework for computational design of robot structures from animal synergies (Thesis)
Summary:
While biological systems display an incredible diversity in behaviors and motion capabilities, it has been shown that for most tasks, only a subspace of the possible poses is used. We propose to exploit these emerging principles from animal motor control as inspiration to guide robot design. In this thesis you will start by extracting such synergistic motions from animal videos and data-bases. Hence, you will develop a computational design method to translate the emerging synergies into precise robot specifications. Finally, you will transform the simulation results into the design of a fully fledged biomimetic robot. In particular, the thesis will be focused on continuing and optimizing the design, manufacturing and control of a biomimetic cheetah with a reduced set of actuators. Potential publication of results in top Robotics venues.
For reference see link: https://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=8373731
Workload:
80% design optimization and manufacturing, 20% performance evaluation and demonstration
Contact:
Francesco Stella ([email protected])
Setting a robot fleet control system for the Swiss CAT+ chemical sample transfer system (Thesis/Semester)
Summary:
In the framework of the Swiss CAT+ project, we have developed a concept for the transfer of chemical samples based on a fleet (or swarm) of mobile mini-robots developed locally and designed around the typical shape of the sample. For localization, they are equipped with LIDAR IMU and wheel encoders. We plan to have about 10 of these mini-robots running in a track suspended above the scientific instruments. The track and the robots already physically exist. We also already implemented the ROS Navigation Stack. The transfer between the scientific instruments and the mini-robots in their track will be handled by 6-axis cobots (Universal Robots 5e or 10e) assisted by a set of industrial cameras for precise positioning. Each 6-axis cobot will be considered as a station. The fleet of mobile mini-robots will be controlled within the track via the ROS framework by the laboratory scheduler and should be autonomous to systematically assign a free mini-robot to a requested station or to deliver a sample.
OSS. Previous ROS knowledge is highly desirable
Deliverables:
- a. To make a scientific literature review for fleet control
- b. To develop, within the framework of the ROS, a complete control system for a fleet of 10 mobile
- mini-robots, 10 induction charging bases and 5 Universal Robots stations.
- c. To establish a full simulation (ideally in Gazebo) based on the existing track form using the
- control software developed in b.
- d. If time permits, start the actual implementation of the developed control system in the Swiss
- CAT+ environment.
Contact:
Vincenzo Scamarcio ([email protected])
Developing a complete solution for robotic chemical commercial bottles manipulations (Thesis)
Summary:
In the Swiss CAT+ project, we are developing a robotic module to standardise chemical solids from different types of commercial bottles up to 2 kg into homogeneously shaped 20 ml screw-capped plastic containers. The first step in this standardisation is the gripping of all commercial chemical bottles by a 6-axis cobot (type Universal Robot UR3e or UR5e). These bottles can have various shapes (cylindrical, round, square) and materials (glass, hard plastic, soft plastic such as PET) and weights ranging from 10 g to 2 kg depending on the density of the chemical product. Once the bottles have been seized, they must be kept stable and secured for subsequent operations such as pouring the contents into a standard container or allowing a sampler to enter the bottle and take a chemical sample.
Deliverables:
- a. To review the scientific literature in the field of robotic safe gripping of variable shapes and
- materials.
- b. To review the existing solutions available on the market.
- c. Select and acquire the most suitable tool.
- d. If no convincing solution exists, design and develop a suitable prototype gripper.
- e. Program the 6-axis UR cobot to work with the chosen gripper.
- f. Validate through a series of reproducibility tests with different commercial bottles, the quality of
- the gripping (systematicity, stability in case of robot movements with different accelerations…).
Contact:
Vincenzo Scamarcio ([email protected])
[closed] Cartesian Robots in a wet lab: dip and spray (Semester)
Summary:
The limit of what is achievable in a laboratory experiment is frequently defined by the researcher’s willingness to spend time on a repetitive task. Robots are more efficient than humans in this area, therefore, we want to modify two different cartesian robots to create layer-by-layer films. The first robot will perform the ‘dipping method’ (lab-scale substrates, up to 20 layers) (Already done in this semester) the latter will automate the ‘spray method’ (up to 200 layers) (To be done in this semester, focus of the project). The final objective is to find the optimal parameters to improve the film thickness error, found by using some characterization techniques
Workload (split of type of work):
- 40% Hardware design and construction
- 40% Control of system
- 20% Characterization + Optimization
Contact:
Vincenzo Scamarcio ([email protected])
How well can a robot handshake? (Thesis x2 students most likely)
Summary:
The project is to investigate, to what extent can a robot fool a human in a handshaking task; i.e.: a Turing test for robotic handshaking. There are many layers and directions to this project, and the specific details of the project will be discussed based on the student’s interests expertise. Here are some directions.
– Make a bio-inspired passive hand. By covering it with multiple layers (thin gloves, ski gloves, etc), at what point will humans be able to not detect the hand is a robot or human?
– How can we understand (and replicate in the future) human-human handshaking? With a passive hand with a large array of tactile sensors, can we obtain “sensor synergies” from the handshaking motion?
– What does the passive stiffness of the wrist play a role to convey the “human-ness” in hand-shaking tasks?
– If we add active tendons (motorise some aspects of the hand), to what extent does twitching or slight gripping convey the “human-ness” in the hand-shaking task?
Workload:
– Fabrication of hand/sensors: 60%
– Developing test methods and experimental protocols for human tests: 10%
– Conducting the aforementioned experiments: 30%
Contact:
Kai ([email protected])
Sensorizing the environment – Developing physical twins for robotic manipulation (Thesis)
Summary:
Robotic manipulation at its heart is the interaction between the robot and the environment. To assess the quality of manipulation and train robotic manipulators in real life, a sensorized “object” which can “feel” how the robot interacts with it can be a useful tool. This project aims to lay the groundwork on creating sensorized “objects” with abilities (including but not limited to) such as: localization of contact, detection of forces, orientation and acceleration measurement, etc. Specific tasks of what this environment will be is to be discussed. Current ideas include a “cube” which the robot can manipulate in-hand and handling of tools such as kitchen tools.
Some links for related technologies:
https://arxiv.org/pdf/1803.00628.pdf
https://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=9762135
https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=9706272
The project requires a multidisciplinary skillest – mechanical design, fabrication, microcontrollers, coding and analysis.
Workload:
– Exploration of technologies to develop the physical twin: 40%
– Developing and (some)characterisation of the twin: 60%
Contact:
Kai ([email protected])
(Closed) Tactile Sensor development (Thesis/Semester)
Summary:
Sensing technologies are essential to develop intelligent robots that can interact and respond to the environment. Commercial sensors usual are engineered well to have reliable, repeatable, and often precise measurements, but can be difficult to integrate into novel hardware as they are constrained by their geometry or other properties set by the manufacturer. In this project, there are two directions.
One is to investigate and explore a variety of sensing technologies which can be developed in house, mostly focusing on tactile sensing. This is an exploratory project, with the aim for the student to try different technologies to see their feasibilities and pros/cons for future robotic implementation. Some starting points include: EIT tactile skins, hydrogel tactile skin, re-implementation of ReSkin (tactile sensing through Hall effect sensors), developing conductive silicone, and combinations of the aforementioned.
Another is to apply existing (or possibly new) tactile sensing technologies explored in the lab to apply them on robotic hands. This would include a lot of trial and error in prototyping the correct shape and manufacturing technique for the application, but also ensuring stability and simplicity in the design such that the sensor can robustly function while the robot is in operation. Design of PCB modules to read the sensors is also another necessary step, although not the priority.
Prior experience with mechatronics prototyping is recommended but not strictly necessary.
Workload:
– Exploration of options “out there”: 20%
– Testing and prototyping different sensors: 60%
– Combining (or rejecting) certain sensors to finalise on a design: 20%
Contact:
Kai ([email protected])
(Closed) RoboCup @Home MAKE Project (Semester)
Summary:
RoboCup @Home is a MAKE Project where we aim to build a home service robot to participate in the international robotics competition: RoboCup. The aim of this project is to work on the software systems of the robot. Software tasks will be around navigation and behavioural tree of the robot.
In both cases, the student should have some level prior experience in relevant fields, as the project requires practical knowledge to integrate state of the art technologies. Specific project directions will be discussed with each student based on their interest and past experience.
Workload:
– 80% technical development / robotic integration
– 20% decision making and planning of the project with other team members
Contact:
Kai ([email protected])
Worming up: Ascending a taut tether with a soft robot to capture atmospheric measurements
Summary:
A kite can be used to capture atmospheric measurements for environmental monitoring. It is of interest to capture data along its tether. Despite their simple design cable stockings can hold large loads. In our lab, we are building tendon-driven soft robot structures which can deform under load and are actuated. These soft robots follow a similar design pattern to cable stockings. The goal of this project is to modify our soft robots to ascend on a taut tether. The robot will then be evaluated in comparison to a conventional wheel based robotic line ascender. The student should have prior experience in 3D printing and rapid prototyping.
Workload:
– 15% literature review
– 30% design of soft robotic line ascender
– 35% fabrication of soft robotic line ascender
– 20% evaluation of soft robotic line ascender
Contact:
Max Polzin ([email protected])
Towards Spider-Robot
Summary:
Aerial robots have advantageous locomotion in free space and do not require to interact with their environment while moving. However, this freedom of motion comes at a reduced locomotion efficiency (with typical flight times in the range of minutes). Ground vehicles on the other side are continuously interacting with their environment requiring advanced perception and controllers to move stable. In this project, we explore hybrid locomotion of a tethered robot which exploits swinging dynamics to preserve energy while moving and limited interactions with its environment, e.g. when forming new attachments. The student should have prior experience in rapid, mechanical prototyping and fabrication.
Workload:
– 10 % literature review
– 20 % narrowing down scenario
– 35% prototype concepts
– 35% evaluation of implemented concepts
Contact:
Max Polzin ([email protected])
Design of a power system for tethered robots
Summary:
In our lab, we are developing robots that are intended to operate in extremely harsh conditions, e.g. on glaciers, caves or tropical forests, where conventional operation modes (connectivity, power, locomotion) face severe drawbacks. Virtually all robots are tethered at one point in their life, be it for debugging or extended duration experiments. Thus tethers are vital and therefore our robot systems are continuously connected through tethers by design. A tether can provide communication, power and safety. The student will design a tether management system which meets these criteria. The tether management system will be deployed to a dangling, rappelling robot intended to explore subglacial cavities. The student should have prior experience with power electronics, communication links and mechanical design.
Workload:
– 30 % research on available components and component selection, e.g. power, communication
– 40% design of sensorized, actuated winch mechanism
– 30% characterization and evaluation of mechanism
Contact:
Max Polzin ([email protected])
Anchor point estimation for actuated, dangling robots
Summary:
A tethered, rappelling bicopter can be used to explore unknown, complex environments e.g. glacial crevasses or tree canopies. Its tether can provide a communication link, power and safety. Depending on its past trajectory the tether can form intermediate anchor points in the environment. These anchor points influence the dynamic behaviour of the robot. From the observed dynamic behaviour of the robot, i.e. its swinging motion, we can estimate the location of the last intermediate anchor point. With an estimate of the last intermediate anchor point, it is feasible to plan a trajectory to successfully detach from said anchor point. The student will develop a simple simulation to capture the described dynamics of the system. Further, the student develops an algorithm to estimate the tether length below the last anchor point for our tethered bicopter. The develop algorithm is evaluated in simulation and on the real robot.
Workload:
– 30% develop simulation
– 40% develop/test algorithm in simulation
– 30% implement algorithm on real system
Contact:
Max Polzin ([email protected])
Learning ROS with ROSbloX
Summary:
The Robot Operating System (ROS2) is becoming the de facto standard in programming complex robotic systems. However, getting started with ROS (in Python or CPlusPlus) can be challenging and overwhelming, particularly when starting with no prior knowledge and learning self-paced. In our Lab, we have developed ROSbloX to ease the entrance into the ROS world for students with no prior knowledge in ROS. In this project, the student will evaluate the quality of our available ROSbloX, e.g. for Lidars, cameras, GNSS systems, IMUs. Further, the student will define metrics to assess how ROSbloX simplify the introduction of novel students to ROS. Prior knowledge of ROS2, Docker, Linux, Single Board Computers is of advantage. You get the chance to take over responsibility for an open source project and to continuously contribute to its future development.
Workload:
– 20% understand problems faced by students when working with ROS
– 15% familiarise with existing ROSbloX
– 25% define metrics to assess qualtiy of ROSbloX
– 25% data collection through survey to apply developed metrics
– 15% improve/advance idea behind ROSbloX
Contact:
Max Polzin ([email protected])
Advanced control of a rappelling, tethered bicopter
Summary:
Tethering robots can be advantageous in numerous scenarios. A tether can provide a reliable, high-bandwidth communication link, safety and power. A rappelling, tethered bicopter has been designed to retrieve ice samples in a glacier. The platform is self-stabilising. However, depending on the flown path, the stabilisation can be sped-up by developing and implementing novel control algorithms. The student will analyse the system and implement a simulation to capture the observed behaviour. Afterwards, the student will come up with novel control strategies to stabilise the robot faster. The control strategies are evaluated in simulation and on the real robot.
Workload:
– 25% understanding dynamics of the system
– 25% implementing simulation to capture system dynamics
– 25% developing novel control algorithms
– 25% implementing novel control algorithms in simulation and on real robot
Contact:
Max Polzin ([email protected])
Visual data logging in field robotics
Summary:
Many field robots are equipped with either stereo or monocular cameras. Often processing their image streams (rectifying, running machine learning inference, logging) poses the highest load on a robot’s onboard computer. The bandwidth of onboard computers is usually limited and enough resources must be available for mission-critical tasks. In this project, several image processing pipelines are implemented and benchmarked to select an optimal pipeline to log visual data (either onboard or remote). The image processing pipelines of particular interest are Nvidia’s hardware accelerated NITROS image processing pipeline, the default CPU-only ROS2 image processing pipeline, and finally the ZED Stereo camera’s pipeline implemented in the ZED camera’s SDK. The student should have prior experience working with ROS2, Docker, Linux, Single Board Computers (ideally Nvidia Jetson).
Workload:
– 20% selection of (feasible) image processing pipelines
– 40% implementation of image processing/logging pipelines
– 40% implementation of benchmarking metrics
Contact:
Max Polzin ([email protected])
Environmental Sensing with a Soft Manipulator on a Robotic Line Ascender
Summary:
Biodiversity is a measure of our ecosystem’s health. Particularly in mountainous regions, the migration of low-altitude species to higher altitudes is an indicator of the speed of a changing climate. Monitoring biodiversity, particularly studying smaller species, e.g. insects, and plants is meticulous work. Robots provide a means to automate these tasks partially. However, the turbulence of thrusters prevents the application of uncrewed aerial vehicles. In this project, the student builds up on previous work in our lab to expand our tethered robot platform with a soft manipulator such that it can measure biodiversity in our backyard. This is a robotics project. It involves designing the hardware, programming and testing it.
Workload:
– 20% Exploring available concepts
– 30% Hardware design and implementation
– 30% Software and control algorithm design and implementation
– 20% Experiments
Contact:
Max Polzin ([email protected])
[closed] Optimal stiffening of a fish tail (Thesis preferred)
Summary:
Being able to actively control the stiffness of a soft structure will allow us to build more capable soft robots, in particular for bioinspired underwater robots that harvest maneuvering energy from the fluid environment. We have previously created “pouches” that we can insert into silicone structures that can stiffen them in different ways. The goal of the project would be to find the best design for these pouches so we can efficiently stiffen or soften a fishtail on demand. The tail should be implemented on robotic hardware for testing the capabilities.
Workload:
– Design and fabrication: 40%
– Analysis and characterization of stiffening: 60%
Contact:
Nana Obayashi ([email protected])
[closed] Design and sensorization of a robotic sea turtle (Thesis/Semester)
Summary:
Development of sensory and control systems for an underwater swimming sea-turtle robot. This includes imaging, water quality and other sensory feedback. We will also explore how we can use this information to enable autonomous exploration.
Workload:
75% experimental (design, fabrication, experimental testing), 25% control/simulation
Contact:
Nana Obayashi ([email protected])
[closed] Evolutionary and regenerative exploration of falling paper morphology (Thesis/Semester)
Summary: Robotic investigation of how passive structure shapes or morphology (such as helicopter seeds) came to be. We will look into evolutionary and regenerative algorithms to reverse engineer how these structures were optimized by nature. Large scale robotic experimentation will also be used.
Workload:
50% experimental (design, fabrication, experimental testing), 50% optimization, learning, algorithm development
Contact:
Nana Obayashi ([email protected])
[closed] Robotic art in the fluid environment (Thesis/Semester)
Summary:
Is there a way to emulate emotion using robots in the fluid environment? An example (although not in fluids) would be to investigate reactions from robotic arm by changing the impedance of the arm based on human pose in dancing. This is an exploratory project idea. Please contact if you are interested!
Workload:
10% Literature review, 50% experimental (design, fabrication, experimental testing), 40% optimization, learning, algorithm development
Contact:
Nana Obayashi ([email protected])
[closed] Robotic phenotyping using Farmbot for co-optimization of crop environmental impact and nutritional value (Thesis)
Summary:
Climate change, ever-increasing population and imbalanced dietary requirements poses a significant challenge for conventional crops and agricultural methods.The aim of the project is to set up the cartesian Farmbot as robotic phenotyping system and develop full physical automation of seeding, environmental control, harvesting and the assessment of the nutritional value of the crops using the cartesian ‘farm bot’. The data generated will be used to have efficient growing methods.
The project requires multidisciplinary skills – mechanical design, fabrication, microcontrollers, coding and data analysis.
Workload:
30% Setup hardware for data acquisition
40% Software algorithms and sensor calibration
30% Data analysis
Contact:
Shiv Katiyar ([email protected])
[closed] Robotic platform for investigation of flocculation in beverages (Thesis/Semester)
Summary:
During the beverage formulation process it is often investigated how developed food product (e.g. coffee) interacts with other beverages like milk. With variation in beverages (e.g. dairy or plant based milk) or even in their formulation, significantly different behaviour in terms of colour, flocculation, sedimentation or foaming of the resulting mixture is detected. Acquired information is used for the objective assessment of the resulting mixture but more importantly as a metric for the further optimization of the constituent ingredients (milk, coffee etc.).
Goal of this project is to develop a robotic system which is able to repeatedly combine two manually prepared beverages, mix them if necessary and keep the temperature constant. Resulting beverage will be then assessed using computer vision methods primarily for the flocculation and phase separation. Assessment of sedimentation, foaming, color or other relevant metric will be explored if possible.
The robot design will be based on the frame of the 3D printer and with the gripper which needs to be designed, such system can repeatability and reliably perform pick, place, pour and mix tasks. Integration of other necessary equipment (e.g. temperature control or camera) has to be done within this constrained environment.
There are no requirements considering computer vision methods, but it is preferred that assessment should be performed using Python and preferably OpenCV library, but other suggestions are most welcome.
Workload:
– 40% design and building of robotic system
– 60% implementation of image processing pipelines
Contact:
Stefan Ilic ([email protected])
Robotic Simulation Toolkit for Education (Thesis/Semester)
Summary:
Educational Robotics helps students of all ages familiarise and expand their knowledge of robotics and programming. while learning other cognitive skills.Given the physical form of the robot and its control system, it is particularly promising to make robotic systems adaptable to tasks and the environment. This project will aim to use robotic simulation for morphology and computational thinking education.
https://gears.aposteriori.com.sg/
Workload:
- 20% Explore education robotic elements
- 30% Design learning activities
- 50% Experiment and analysis data
Contact person: Alan Wu ([email protected])
Robotic Education with AI guidance (Thesis/Semester)
Summary:
Educational Robotics helps students of all ages familiarise and expand their knowledge of robotics and programming. while learning other cognitive skills. This project will aim to use AI to give guidance and suggestions to students instead of human instructors. The task for experiment subjects will be building a robotic gripper. The AI can give advice to experiment subjects when they are facing problems. We compare the learning performance between human assistants and AI assistance.
Workload:
- 20% Explore learning outcome evaluation methods
- 30% Refine learning activities and define evaluation process
- 50% Experiment and analysis data
Contact person: Alan Wu ([email protected])
Animal behavior to robot design: a methodological framework for computational design of robot structures from animal synergies
Summary: While biological systems display an incredible diversity in behaviors and motion capabilities, it has been shown that for most tasks, only a subspace of the possible poses is used. We propose to exploit these emerging principles from animal motor control as inspiration to guide robot design. In this thesis you will start by extracting such synergistic motions from animal videos and data-bases. Hence, you will develop a computational design method to translate the emerging synergies into precise robot specifications. Finally, you will transform the simulation results into the design of a fully fledged biomimetic robot. In particular, the thesis will be focused on the design, manufacturing and control of a biomimetic cheetah with a reduced set of actuators. Potential publication of results in top Robotics venues.
For reference see link: https://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=8373731
Workload:
- 10% Extraction of existing synergies from videos and open-source databases of animal motion (Computer vision, Inverse Kinematic and order-reduction methods)
- 10% Development of a computational method for mechanical design specifications (Evolutionary algorithms)
- 80% Design and testing of a cheetah robot (Mechatronic design)
Contact person: Francesco Stella
IMUblock: A modular and ready-to-go solution to the pose estimation problem of soft robots
Summary: Due to the inherent compliance, soft robots are able to deform in infinite degrees of freedom. Moreover, the limited availability of physically compatible sensors, makes the shape estimation of soft robotic systems extremely challenging. In this project you will develop the modular and scalable solution – IMUblock – to this problem by leveraging IMU technology and discretized models of soft robots. The IMUblock will then be evaluated experimentally on a growing, extendable continuum soft manipulator. Potential publication of results in top Robotics venues.
For reference see link: https://link.springer.com/chapter/10.1007/978-3-030-71151-1_48
Workload:
- 50% Design of a modular, wireless IMU sensor (Rapid Prototyping, Electronic design)
- 20% Embed a filter based on reduced orders of soft robots (PCC) in the IMUblock (C++, Python, ROS)
- 30% Test the novel sensor solution on existing soft manipulators.
Contact person: Francesco Stella, Max Polzin
Soft Robotic Toolkit for Education
Summary: Educational Robotics helps students of all ages familiarize and expand their knowledge of robotics and programming. while learning other cognitive skills. There are many modular educational robots in the market but there is a missing piece, soft component. The aim of this project is to develop a toolkit with several soft components such as soft actuators.
Workload:
- 20% Explore soft robotic elements
- 30% Design several modular soft robotic components
- 30% Manufacture
- 20% Testing
Contact person: Yi-Shiun Wu
Cartesian Robot with custom gripper and computer vision
Summary: Laboratories are ripe for automation as they are semi-structured. Cartesian robots offer precision motions, yet typically rigid end effectors are used. By combining a cartesian robot with a compliant gripper and computer vision and modular equipment, we want to explore the complexity of tasks that can be accomplished.
Workload:
- 40% Hardware design and construction
- 20% Interfacing electronics
- 40% Control of system and computer vision
Contact person: Stefan Ilic, Vincenzo Scamarcio
Cartesian Robots in a wet lab: dip and spray
Summary: The limit of what is achievable in a laboratory experiment is frequently defined by the researcher’s willingness to spend time on a repetitive task. Robots are more efficient than humans in this area, therefore, we want to modify two different cartesian robots to create layer-by-layer films. The first robot will perform the ‘dipping method’ (lab-scale substrates, up to 20 layers) the latter will automate the ‘spray method’ (up to 200 layers). The final objective is to find the optimal parameters to improve the film thickness error, found by using some characterization techniques.
Workload:
- 40% Hardware design and construction
- 40% Control of system
- 20% Characterization + Optimization
Contact person: Vincenzo Scamarcio
Fabrication and characterization of a variable stiffness soft structure
Summary: Being able to actively control the stiffness of a soft structure will allow us to build more capable soft robots, in particular for bioinspired underwater robots that harvest maneuvering energy from the fluid environment. In this project, you will explore techniques that are used to achieve variable stiffness for soft silicone structures, such as an underwater soft tentacle. The aim for this project is to investigate mechanisms for high stiffness variation, characterizing the structural behavior, and if successful, implement on robotic hardware for maneuverability demonstrations.
Related references:
- https://link.springer.com/chapter/10.1007/978-3-030-25332-5_6
- https://www.liebertpub.com/doi/full/10.1089/soro.2019.0034
Workload: 20% mechanical design, 50% design iteration, exploration, and fabrication, 30% prototyping with microcontrollers
Contact person: Nana Obayashi
Exploration of emergent limit cycles of floating objects in water
Summary: To design better robots that exploit the fluidic environment such as water, it is important to study the bio-inspired interactions between morphologies. Non-contact manipulation is seen in nature, for example in tool usages by marine animals. This project involves the development of an experimental setup for manipulating objects in water using soft structures and exploring the emergent behaviors of these objects. It was previously seen that certain “limit cycles” can be observed from non-contact manipulation of floating objects using a structure similar to a soft fin. This will be a highly exploratory project on characterizing the emergent limit cycles to help us understand how we can design robots that exploit the fluid environment for a given task.
Related references:
Workload: 20% mechanical design, 60% design iteration, exploration, and fabrication, 20% prototyping with microcontrollers
Contact person: Nana Obayashi
Robotic phenotyping for co-optimization of crop environmental impact and nutritional value
Summary: Food production and agriculture are facing enormous challenges due to factors such as climate change, ever-increasing population and imbalanced dietary requirements. This poses a significant challenge for conventional crops and agricultural methods. Agri-robotics opens the potential for mass direct in-field phenotyping of crops under true farm conditions. The aim of the project is to set up the cartesian farmbot as a robotic phenotyping system and develop full physical automation of seeding, environmental control, harvesting and the assessment of the nutritional value of the crops using the cartesian ‘farm bot’.
The project requires multidisciplinary skills – mechanical design, fabrication, microcontrollers, coding and data analysis.
Workload:
- 30% Setup hardware for data acquisition
- 40% Software algorithms and sensor calibration
- 30% Data analysis
Contact person: Shiv Katiyar
Topographic terrAin Modeling for Agricultural Robots (TAMAR)
Type: Semester Project
Summary: Robust rough terrain navigation of uncrewed ground vehicles enables their usage for novel agricultural applications, especially in environments where the usage of traditional farming machinery is impossible, e.g. autonomous harvesting in steep vineyards or orchards. However, testing uncrewed ground vehicles (UGV) on natural slopes is a cumbersome and potentially dangerous task. In this project, a simulation of the slopes of a Swiss vineyard is developed to evaluate novel designs for agricultural robots. The simulation a) imports topological information provided by the Swiss Federal Office of Topography and b) includes a data-driven traction model for UGVs maneuvering on steep terrain. The accuracy of the developed simulation is validated experimentally.
Keywords: Terrain simulation, data-driven modeling, mapping
Workload: 15% literature research, 30% experiments, 55% simulation development
Contact Person: Max Polzin
Topologically constrained planning for robots operating in precipitous environments (TOP-ROPE)
Type: Semester Project / Master Thesis
Summary: Tethered rappelling uncrewed ground vehicles (UGV) have potential applications in future agricultural systems, especially where the terrain prevents the usage of traditional systems, e.g. autonomous harvesting in steep vineyards or orchards. While a tether connected to a UGV expands its operating area to steep slopes, it imposes additional constraints when planning feasible paths for said UGV. In this project, novel path planning algorithms which consider the constraints imposed by a tether connected to a UGV are developed.
Keywords: Path planning, robotic navigation
Workload: 20% literature research, 35% simulation experiments, 45% thinking
Contact Person: Max Polzin
Anchor deployment and Collection for Tethered Robots Exploring Steep Slopes (ACTRESS)
Type: Semester Project / Master Thesis
Summary: Uncrewed ground vehicles (UGV) have potential applications in future agricultural systems, e.g. automatic harvesting, phenotyping, weed control and pest management. Agricultural terrain is generally challenging to maneuver in, especially when driving on slopes such as in steep vineyards and orchards. A UGV can be equipped with a winch and tether to a) expand its maneuverable space and b) to improve its recovery capabilities from catastrophic failures. The maneuverable space of a UGV which is connected to an anchor point by a tether differs from the maneuverable space of an untethered one. In this project a dynamic anchoring system is developed to be deployed and retracted autonomously by a UGV, to maximize its maneuvering capabilities.
Keywords: Mechatronics prototyping
Workload: 10% literature research, 50% mechanical design, 40% experiments
Contact Person: Max Polzin
Automated Robot Testing In Steep Terrain (ARTIST)
Type: Semester Project / Master Thesis
Summary: Improving the maneuverability of uncrewed ground vehicles (UGV) on natural slopes enables novel applications of UGVs in agriculture, e.g. autonomous harvesting in vineyards or orchards. However, testing UGVs and novel algorithms on natural slopes is a cumbersome and potentially dangerous task. Thus, a platform to simulate driving on changing slopes with different surface textures is developed. The platform alters the direction of the gravitational force acting on the systems under test. Altering the direction of the gravitational force requires lifting and pulling respectively pushing the systems under test with a constant force. In this project, a system is designed and implemented to exert a varying force on a UGV.
Keywords: Dynamic systems, motor control
Workload: 35% system design, 40% experiments, 25% control
Contact Person: Max Polzin
Fabrication and characterisation of a soft sensorized fingertip
Type: Semester Project
Summary: Tactile sensing is key to achieving robust dexterous manipulation when using robot hands. Previous methods of tactile sensing include using cameras to measure the deformation of soft material and attaching integrated PCB electronics on fingertip. In this project, you will explore methods of using 3D printable soft conductive filament to manufacture a fingertip sensor which can be used directly from the print. The aim for this project is to investigate different morphologies of 3D printed sensors (provided with a few starting points), measure/understand their response, and if successful implement it on a robot finger.
Keywords: Soft sensors, mechatronics prototyping
Workload: 15% mechanical design, 50% design iteration, exploration, and fabrication, 30% electronics
Contact Person: Kai Junge
Topology optimization for soft electronic skins
Type: Semester Project
Summary: Soft electronic skins (E-skins) capable of tactile pressure sensing have the potential to endow robotic systems with many of the same somatosensory properties of natural human skin. In this project, you will first develop computational methods to optimize the relation between topology and sensitivity for a grid of soft pressure sensors. Hence, the simulation results will be brought to real life, evaluating manufacturing possibilities and limitations arising from 3D printing and casting techniques. Finally, the design performance will be evaluated on a specific application such as safe human-robot interaction, dexterous manipulation, or guided rehabilitation.
Keywords: Soft sensors, optimal design, mechatronics prototyping
Workload: 60% simulation and optimization , 30% system design and experiments, 10% proof of concept application
Contact Person: Francesco Stella
Low-cost, sensorized, finger prosthetics for developing countries
Type: Semester Project
Summary: The World Health Organization estimates that, in the developing world, there are 40 million amputees, and only 5% of them have access to any form of prosthetic care. Several initiatives, by academic and non-profit organizations community, have already tried to leverage rapid prototyping techniques to propose a solution to this problem. In this project you will contribute to this collective knowledge, developing a parametric design of a finger prosthetic with embedded tactile sensors that can be quickly personalized and 3d-printed. The design will then be quantitatively tested and validated. Finally, if the design process is successful, the design will be sent and evaluated by amputees in Mali.
For reference: Limbs International, “Why Limbs,” [Online]. Available: https://www.limbsinternational.org/why-limbs.php. 2015.
Keywords: Prosthetics, embedded sensors, prototyping
Workload: 80% design , 20% experimental validation
Contact Person: Francesco Stella
IMU sensor fusion for soft robotics
Type: Semester Project / Master Thesis
Summary: Due to the inherent compliance, soft robots are able to deform in infinite degrees of freedom. Moreover, the limited availability of physically compatible sensors, makes the shape estimation of soft robotic systems extremely challenging. In this project you will combine discretized models of soft robots, such as the constant curvature model, with state of the art sensor fusion algorithms. The algorithm will then be evaluated experimentally on a growing, extendable 3D printed continuum body structure with embedded IMUs.
For reference, see link.
Keywords: Soft robotics, Kalman filtering, IMUs
Workload: 80% algorithm design , 20% experimental validation
Contact Person: Francesco Stella
Control optimization and steering of underwater swimmers
Type: Semester Project
Summary: There are several simple soft underwater swimmer platforms that are of interest. One focus of the project will be the optimization of actuation control for the underwater swimmers. We will also investigate different methods of controlling the trajectory of the swimmer (eg. drag-based, differential thrust, etc) and explore how we can use this to enable autonomous exploration.
Keywords: Soft robotics, optimization, control, computer vision, electronics
Workload: 60% control/simulation, 40% experimental (design, fabrication, experimental testing)
Contact Person: Nana Obayashi
Underwater object manipulation with air bubbles
Type: Semester Project / Master Thesis
Summary: Development of experimental setup for manipulating objects/debris underwater leveraging air bubbles or soft structures. We take inspiration from sea creatures, such as dolphins and whales that use “bubble nets” to capture prey. We will also investigate methods for simulating these complex solid-fluid interactions.
Keywords: Manipulation, computer vision, prototyping, electronics, sensing, control, simulation
Workload: 75% experimental (design, fabrication, experimental testing), 25% control/simulation
Contact Person: Nana Obayashi
Agricultural Robotics: Robotic optimization of plant growing conditions
Type: Semester Project / Master Thesis
Summary: Using a cartesian robot (farmbot) we want to develop feedback control based on computer vision to assess plant growth and optimize conditions through running robotic growing experiments. Can we make plants grow faster, and can be predict their performance from early stage growth?
Keywords: Feedback control, optimization, agricultural robotics, computer vision
Workload: 75% experimental (design, fabrication, experimental testing), 25% control/simulation
Contact Person: Shiv Katiyar
‘Robotic Scientist’ Intelligent automation of experimental analysis (titration)
Type: Semester Project / Master Thesis
Summary: Develop the hardware, control and computer vision to intelligently automate titration experiments. Many experiments require the use of burette to perform titration, where the colour change is used to indicate when the experiment should be terminated. Currently this is highly manual and there are significant problems with repeatability and reliability. Automating this process will be highly impactful, and also enable more intelligent methods to be explored.
Keywords: Mechatronics prototyping, computer vision, control
Workload: 60% design and implementation , 20% computer vision, 20% control
Contact Person: Stefan Ilic
Mechanism for Growing Robots
Type: Master Thesis
Summary: Biological systems show a significant ability to change and alter their structure through growth. A number of mechanisms for growth have been developed for robotic structures. Here, we want to develop mechanisms that allow for plant-inspired growth – i.e. structures that can ‘grow’ and subdivide, to allow us to create large scale structures through growth.
Keywords: Mechatronics prototyping, control
Workload: 80% design and implementation , 20% control
Contact Person: Shiv Katiyar
Design and fabrication of sensorized bioinspired robots hands (Semester/Full Masters Project)
Summary: Starting for biological inspiration, use novel 3D printing technologies and casting to rapid fabricate robotic hands with incorporated soft sensors. Investigate the design optimization of the sensor placement, and utilize multi-body, multi-material FEA based simulators to optimize control.
Keywords: Bio-inspired robotics, soft sensors, control, design optimization.
Workload: 75% experimental (design, fabrication, experimental testing), 25% control/simulation
Agricultural Robotics: Robotic optimization of plant growing conditions (Semester/Full Masters Project)
Summary: Using a cartesian robot (farmbot) we want to develop feedback control based on computer vision to assess plant growth and optimize conditions through running robotic growing experiments. Can we make plants grow faster, and can be predict their performance from early stage growth?
Keywords: Feedback control, optimization, agricultural robotics, computer vision
Workload: 75% experimental (design, fabrication, experimental testing), 25% control/simulation
Optimization of Robotic Sea Turtle Flipper (Morphology and Control) (Semester/Full Masters Project)
Summary: The development of soft swimming robots is particularly challenging due to the interactions of the soft body with the fluid. Here, we want to leverage modelling techniques and data-driven methods to optimize the design of the flippers for a sea-turtle and also the controllers.
Keywords: Manipulation, computer vision, sensing, feedback, optimization, learning
Workload: 75% experimental (design, fabrication, experimental testing), 25% control/simulation
Sensorization of a Robotic Sea Turtle (Semester/Full Masters Project)
Summary: Development of sensory and control systems for an underwater swimming sea-turtle robot. This includes imaging, water quality and other sensory feedback. We will also explore how we can use this information to enable autonomous exploration.
Keywords: Sensing, control, computer vision, electronics.
Workload: 75% experimental (design, fabrication, experimental testing), 25% control/simulation
Evolutionary Design of Soft Sensors (Semester/Full Masters Project)
Summary: The design of soft sensors for tactile perception significantly affects their performance. Using new fabrication techniques for soft sensors, we will develop evolutionary approaches to optimize the design for different tasks.
Keywords: Sensing, control, optimization, 3D printing, fabrication
Workload: 50% experimental (design, fabrication, experimental testing), 50% optimization, learning, algorithm development
Wearable Sensorized Gloves (Semester/Full Masters Project)
Summary: utilizing our novel fluidic soft sensors and knitted sensorized sensors, develop gloves which perform on-board real-time sensor processing. In addition incorporate activ efunctionality – e.g. control adhesion, or actuation
Keywords: Sensing, control, optimization, fabrication
Workload: 75% experimental (design, fabrication, experimental testing), 25% optimization, learning, algorithm development