Quantitative measurement and comparison of breakthroughs inside the gas diffusion layer using lattice Boltzmann method and computed tomography scan

H. Pourrahmani; M. Hosseini; H. Moussaoui; E. Oveisi; M. Siavashi et al. 

Membrane electrode assembly simulation of anion exchange membrane water electrolysis

K. Lawand; S. N. Sampathkumar; Z. Mury; J. Van Herle 

Local electrochemical and thermal investigation of a segmented reversible solid oxide fuel cell and electrolyzer

H. Moussaoui; A. D. Wesoly; S. Diethelm; Z. Wuillemin; D. Montinaro et al. 

Operando analysis of a solid oxide fuel cell by environmental transmission electron microscopy

Q. Jeangros; M. Bugnet; T. Epicier; C. Frantz; S. Diethelm et al. 

Techno-economic analysis of solar hydrogen production via PV power/concentrated solar heat driven solid oxide electrolysis with electrical/thermal energy storage

Y. Zhang; Z. Wang; Z. Du; Y. Li; M. Qian et al. 

Simulation and optimization of the impacts of metal-organic frameworks on the hydrogen adsorption using computational fluid dynamics and artificial neural networks

H. Pourrahmani; M. H. Mohammadi; B. Pourhasani; A. Gharehghani; M. Moghimi et al. 

Power-to-methane via co-electrolysis of H2O and CO2: Reactor operation and system simulation

P. Aubin; L. Wang; J. Van Herle 

The thermodynamic and life-cycle assessments of a novel charging station for electric vehicles in dynamic and steady-state conditions

H. Pourrahmani; C. Xu; J. Van Herle 

Raising the temperature on electrodes for anion exchange membrane electrolysis-activity and stability aspects

T. B. Ferriday; P. H. Middleton; M. L. Kolhe; J. Van Herle 

Performance evaluation and the implementation of the turbocharger, fuel cell, and battery in Unmanned Aerial Vehicles (UAVs)

H. Pourrahmani; J. Van Herle 

Lab-Scale Investigation of the Integrated Backup/Storage System for Wind Turbines Using Alkaline Electrolyzer

H. Pourrahmani; R. Zahedi; S. Daneshgar; J. Van Herle 

How Acid Washing Nickel Foam Substrates Improves the Efficiency of the Alkaline Hydrogen Evolution Reaction

T. B. B. Ferriday; S. N. Sampathkumar; P. H. Middleton; J. Van Herle; M. L. Kolhe 

Fast online diagnosis for solid oxide fuel cells: Optimisation of total harmonic distortion tool for real-system application and reactants starvation identification

H. Moussaoui; G. Hammerschmid; J. Van Herle; V. Subotic 

Evaporating water-cooled methanation reactor for solid-oxide stack-based power-to-methane systems: Design, experiment and modeling

P. Aubin; L. Wang; J. Van Herle 

Activation of stainless steel 316L anode for anion exchange membrane water electrolysis

S. N. Sampathkumar; T. B. Ferriday; P. H. Middleton; J. Van Herle 

Two novel cogeneration charging stations for electric vehicles: Energy, exergy, economic, environment, and dynamic characterizations

H. Pourrahmani; C. Xu; J. Van Herle 

Optimization and dynamic responses of an integrated fuel cell and battery system for an 800 kW ferry: A case study

H. Pourrahmani; M. Gay; A. Yavarinasab; J. Van Herle 

Organic Rankine Cycle as the Waste Heat Recovery Unit of Solid Oxide Fuel Cell: A Novel System Design for the Electric Vehicle Charging Stations Using Batteries as a Backup/Storage Unit

H. Pourrahmani; C. Xu; J. Van Herle 

Water management of the proton exchange membrane fuel cells: Optimizing the effect of microstructural properties on the gas diffusion layer liquid removal

H. Pourrahmani; J. Van Herle 

Integrated solar-driven high-temperature electrolysis operating with concentrated irradiation

M. Lin; C. Suter; S. Diethelm; J. Van Herle; S. Haussener 

The Application of Fuel-Cell and Battery Technologies in Unmanned Aerial Vehicles (UAVs): A Dynamic Study

H. Pourrahmani; C. M. I. Bernier; J. Van Herle 

The impacts of the gas diffusion layer contact angle on the water management of the proton exchange membrane fuel cells: Three-dimensional simulation and optimization

H. Pourrahmani; J. Van Herle 

Poisoning Effects of Cerium Oxide (CeO2) on the Performance of Proton Exchange Membrane Fuel Cells (PEMFCs)

H. Pourrahmani; M. Matian; J. Van Herle 

Thermoelectric Generator as the Waste Heat Recovery Unit of Proton Exchange Membrane Fuel Cell: A Numerical Study

H. Pourrahmani; H. Shakeri; J. Van Herle 

Degradation study of a reversible solid oxide cell (rSOC) short stack using distribution of relaxation times (DRT) analysis

S. N. Sampathkumar; P. Aubin; K. Couturier; X. Sun; B. R. Sudireddy et al. 

Evaluation Criterion of Proton Exchange Membrane (ECPEM) fuel cells considering inserted porous media inside the gas flow channel

H. Pourrahmani; J. Van Herle 

Comparison and optimization of different fuel processing options for biogas-fed solid-oxide fuel cell plants

S. Ma; G. Loreti; L. Wang; F. Marechal; J. Van Herle et al. 

Electric vehicle charging station using fuel cell technology: Two different scenarios and thermodynamic analysis

H. Pourrahmani; M. Gay; J. Van Herle 

Poisoning effects of chlorine on a solid oxide cell operated in co-electrolysis

G. Jeanmonod; S. Diethelm; J. Van Herle 

Assessment of ammonia as energy carrier in the use with reversible solid oxide cells

M. Zendrini; M. Testi; M. Trini; P. Daniele; J. Van Herle et al. 

Techno-Economic Optimization of an Integrated Biomass Waste Gasifier–Solid Oxide Fuel Cell Plant

M. Pérez-Fortes; V. He; A. Nakajo; J. Schiffmann; F. Maréchal et al. 

Thermodynamic analysis of a tri-generation system using SOFC and HDH desalination unit

H. R. Abbasi; H. Pourrahmani; N. Chitgar; J. Van Herle 

Reversible solid-oxide cell stack based power-to-x-to-power systems: Economic potential evaluated via plant capital-cost target

Y. Zhang; N. Wang; X. Tong; L. Duan; T-E. Lin et al. 

Triple-Mode Grid-Balancing Plants via Biomass Gasification and Reversible Solid-Oxide Cell Stack: Economic Feasibility Evaluation via Plant Capital-Cost Target

Y. Zhang; N. Wang; C. Li; M. Perez-Fortes; L. Duan et al. 

Theoretical and Experimental Investigation of a 34 Watt Radial-Inflow Steam Turbine with Partial-Admission

P. Wagner; J. Van herle; J. Schiffmann 

Techno-economic comparison of 100% renewable urea production processes

H. Zhang; L. Wang; J. Van Herle; F. Marechal; U. Desideri 

Triple-mode grid-balancing plants via biomass gasification and reversible solid-oxide cell stack: Concept and thermodynamic performance

L. Wang; Y. Zhang; C. Li; M. Pérez-Fortes; T-E. Lin et al. 

Techno-economic evaluation of biomass-to-fuels with solid-oxide electrolyzer

H. Zhang; L. Wang; F. Maréchal; U. Desideri; J. Van Herle 

Reversible solid-oxide cell stack based power-to-x-to-power systems: Comparison of thermodynamic performance

L. Wang; Y. Zhang; M. d. M. Perez Fortes; P. Aubin; T-E. Lin et al. 

The effect of SO2 on the Ni-YSZ electrode of a solid oxide electrolyzer cell operated in co-electrolysis

G. Jeanmonod; S. Diethelm; J. Van Herle 

In-situ experimental benchmarking of solid oxide fuel cell metal interconnect solutions

M. Bianco; P. Caliandro; S. Diethelm; S. Yang; A. Dellai et al. 

Evolution of the Morphology Near Triple-Phase Boundaries in Ni–Yttria Stabilized Zirconia Electrodes Upon Cathodic Polarization

A. Nakajo; G. Rinaldi; P. Caliandro; G. Jeanmonod; L. Navratilova et al. 

Corrosion behaviour of nitrided ferritic stainless steels for use in solid oxide fuel cell devices

M. Bianco; S. Poitel; J-E. Hong; S. Yang; Z-J. Wang et al. 

Enhancing the operational flexibility of thermal power plants by coupling high-temperature power-to-gas

Y. Sun; L. Wang; C. Xu; J. Van Herle; F. Marechal et al. 

Experimental characterization of a solid oxide fuel cell coupled to a steam-driven micro anode off-gas recirculation fan

P. H. Wagner; Z. Wuillemin; D. Constantin; S. Diethelm; J. Van herle et al. 

Theoretical and Experimental Investigation of a Small-scale, High-speed, and Oil-free Radial Anode Off-gas Recirculation Fan for Solid Oxide Fuel Cell Systems

P. H. Wagner; J. Van Herle; J. A. Schiffmann 

Techno-economic comparison of green ammonia production processes

H. Zhang; L. Wang; J. Van Herle; F. Maréchal; U. Desideri 

Techno-economic optimization of biomass-to-methanol with solid-oxide electrolyzer

H. Zhang; L. Wang; M. Perez-Fortes; J. Van Herle; F. Marechal et al. 

Balancing wind-power fluctuation via onsite storage under uncertainty: Power-to-hydrogen-to-power versus lithium battery

Y. Zhang; L. Wang; N. Wang; L. Duan; Y. Zong et al. 

Degradation analysis of commercial interconnect materials for solid oxide fuel cells in stacks operated up to 18000 hours

M. Bianco; J. P. Ouweltjes; J. Van Herle 

Method to Measure Area Specific Resistance and Chromium Migration Simultaneously from Solid Oxide Fuel Cell Interconnect Materials

J. Tallgren; O. Himanen; M. Bianco; J. Mikkola; O. Thomann et al. 

Characterization of local morphology and availability of triple-phase boundaries in solid oxide cell electrodes

G. Rinaldi; A. Nakajo; P. Burdet; M. Cantoni; W. K. S. Chiu et al. 

Model-assisted identification of solid oxide cell elementary processes by electrochemical impedance spectroscopy measurements

P. Caliandro; A. Nakajo; S. Diethelm; J. Van Herle 

Techno-Economic Optimization of CO2-to-Methanol with Solid-Oxide Electrolyzer

H. Zhang; L. Wang; J. Van Herle; F. Maréchal; U. Desideri 

Power-to-methane via co-electrolysis of H2O and CO2: The effects of pressurized operation and internal methanation

L. Wang; M. Rao; S. Diethelm; T-E. Lin; H. Zhang et al. 

Enforcing optimal operation in solid-oxide fuel-cell systems

T. d. A. Ferreira; Z. Wuillemin; T. Faulwasser; C. Salzmann; J. Van Herle et al. 

Trade-off designs of power-to-methane systems via solid-oxide electrolyzer and the application to biogas upgrading

G. Jeanmonod; L. Wang; S. Diethelm; F. Maréchal; J. Van herle 

Design of a Pilot SOFC System for the Combined Production of Hydrogen and Electricity under Refueling Station Requirements

M. Perez-Fortes; A. Mian; S. Srikanth; L. Wang; S. Diethelm et al. 

Real-time optimization of an experimental solid-oxide fuel-cell system

T. d. A. Ferreira; Z. Wuillemin; A. G. Marchetti; C. Salzmann; J. Van Herle et al. 

Reversible solid oxide systems for energy and chemical applications – Review & perspectives

V. Venkataraman; M. Pérez-Fortes; L. Wang; Y. S. Hajimolana; C. Boigues-Muñoz et al. 

Performance Analysis of Ammonia in Solid Oxide Fuel Cells

S. Nuggehalli Sampathkumar; X. Sun; S. Joris; J. Van Herle; P. H. Middleton et al. 

Theoretical and Experimental Investigation of a 34 Watt Radial-Inflow Steam Turbine with Partial-Admission

P. H. Wagner; J. Van Herle; J. A. Schiffmann 

Influence of Large Relative Tip Clearances for a Micro Radial Fan and Design Guidelines for Increased Efficiency

P. H. Wagner; J. Van Herle; J. A. Schiffmann 

(Invited) Exchanging Degradation for Durability: Accelerated Stress Test Protocols for Solid Oxide Fuel Cells and Electrolysers

S. J. McPhail; J. Laurencin; A. Hagen; A. Leon; J. Van Herle et al. 

Design and Experimental Realization of a Steam-Driven Micro Recirculation Fan for Solid Oxide Fuel Cell Systems

P. H. Wagner; Z. Wuillemin; S. Diethelm; J. Van Herle; J. A. Schiffmann 

A Review of Membrane Electrode Assemblies for the Anion Exchange Membrane Water Electrolyser: Perspective on Activity and Stability

T. B. Ferriday; S. N. Sampathkumar; P. H. Middleton; M. L. Kolhe; J. Van Herle 

A review of the security vulnerabilities and countermeasures in the Internet of Things solutions: A bright future for the Blockchain

H. Pourrahmani; A. Yavarinasab; A. M. H. Monazzah; J. Van Herle 

Readiness evaluation of SOFC-MGT hybrid systems with carbon capture for distributed combined heat and power

V. He; M. Gaffuri; J. Van herle; J. Schiffmann 

Addressing planar solid oxide cell degradation mechanisms: A critical review of selected components

S. J. McPhail; S. Frangini; J. Laurencin; E. Effori; A. Abaza et al. 

The applications of Internet of Things in the automotive industry: A review of the batteries, fuel cells, and engines

H. Pourrahmani; A. Yavarinasab; R. Zahedi; A. Gharehghani; M. H. Mohammadi et al. 

A Review on the Long-Term Performance of Proton Exchange Membrane Fuel Cells: From Degradation Modeling to the Effects of Bipolar Plates, Sealings, and Contaminants

H. Pourrahmani; M. Siavashi; A. Yavarinasab; M. Matian; N. Chitgar et al. 

Fuel cell-battery hybrid systems for mobility and off-grid applications: A review

S. Ma; M. Lin; T-E. Lin; T. Lan; X. Liao et al. 

Tailoring nanocatalysts and reaction interfaces for water- and CO2-electrolysis

Green hydrogen production using Shewanella oneidensis MR-1 bioanode and cuprous oxide-based photocathode

Spinel Protective Coatings for Solid Oxide Cell (SOC) Interconnects (ICs)

Modeling, design and economics of PEC devices

Design and assessment of an evaporating water-cooled methanation reactor for a SOE-based power-to-methane system

Electrochemical devices and computer science: water/thermal management of proton exchange membrane fuel cells and electrolyzers in different scales

Decision support methodology for waste-to-value process integration

Decision support for the design of integrated biorefineries

Transparent structured conductive coating for applications in smart windows

Investigation of Biomass Hydrothermal Conversion Products by HRMS

High-speed turbocompressors for natural fluid heat-pumps: from integrated design to digital-twin

Using Complex Hydrides for Hydrogen Storage and Direct Borohydride Fuel Cells for Electricity Production

Towards a negative-emission society

Flexibilisation of Biogas-Based Power-to-Gas Processes: A Techno-Economic and Experimental Assessment

Enabling renewable Europe through optimal design and operation

Design guidelines for next-generation sodium-nickel-chloride batteries

Regionalized Life Cycle Assessment of Food and Energy Systems

Fundamental study on microlayer dynamics in nucleate boiling

Integrating non-visual effects of light in the automated daylight-responsive control of blinds and electric lighting

Experimental investigation and analysis of sequential jet impingement concepts for enhanced turbine cooling

District heating and cooling systems to integrate renewable energy in urban areas

Effects of impurities and local behavior characterization using active thermography on solid oxide electrolysis cells

Small-scale organic Rankine cycle turbo-generator for waste heat recovery on truck engine

Advanced analytical electron microscopy applied to Solid Oxide Cell materials and their degradation

Numerical and experimental investigations on non-contacting seals for small-scale applications

Aqueous Redox Flow Batteries Enhanced by Solid Boosters

Cyclic degradation analysis of reversible Solid Oxide Cell short-stack

S. Nuggehalli Sampathkumar; M. d. M. Perez Fortes; S. Diethelm; D. Constantin; P. Aubin et al. 

Sofc system with anode off-gas recirculation

Z. Wuillemin; D. Favrat; J. Schiffmann; J. Van Herle; P. Wagner