Teaching

Lectures by Prof. Brugger

  • Advanced additive manufacturing technologies

    Advanced 3D forming techniques for high throughput and high resolution (nanometric) for large scale production. Digital manufacturing of functional layers, microsystems and smart systems.

    Section of Mechanical Engineering
    Teachers: Brugger Jürgen, Moser Christophe, Pu Ye
    Language: english
    Academic term: 2024-2025


  • Advanced microfabrication practicals

    This TP allows for in-depth training on advanced micro and nanofabrication methods in a clean-room environment for selected applications, gain deeper knowledge in MEMS/NEMS processes, work in a small group together with PhD students/postdocs during 14 weeks touching all aspects of a microprocess.

    Section of Microtechnics
    Teachers: Brugger Jürgen, Benea-Chelmus Ileana-Cristina, Sayah Abdeljalil, Bertsch Arnaud
    Language: english
    Academic term: 2024-2025


  • Advanced topics in micro- and nanomanufacturing: top-down meets bottom-up

    This course introduces advanced fabrication methods enabling the manufacturing of novel micro- and nanosystems (NEMS/MEMS). Both top-down techniques (lithography, stenciling, scanning probes, additive techniques) and bottom-up approaches (self-assembly) are presented.

    Doctoral Program in Microsystems and Microelectronics
    Teachers: Böhringer Karl Friedrich, Brugger Jürgen, Perez-Murano Francesc, Mastrangeli Massimo
    Language: english
    Academic term: 2024-2025


  • Introduction to additive manufacturing



    MINEUR
    Teachers: Moser Christophe, Brugger Jürgen, Boillat Eric
    Language: english
    Academic term: 2024-2025


  • MEMS practicals I

    Objective of this practical is to apply in specific experimental settings the knowledge acquired in various MEMS related class

    Section of Microtechnics
    Teachers: Brugger Jürgen, Bertsch Arnaud, Boero Giovanni
    Language: english
    Academic term: 2024-2025


  • MEMS practicals II

    Objective of this practical is to apply in specific experimental settings the knowledge acquired in various MEMS related class

    Section of Microtechnics
    Teachers: Boero Giovanni, Brugger Jürgen, Bertsch Arnaud
    Language: english
    Academic term: 2024-2025


  • MOOC: Micro and Nanofabrication (MEMS)

    Micro- and nanofabrication can be taught to students and professionals by textbooks and ex-cathedra lectures, but the real learning comes from seeing the manufacturing steps as they happen. This MOOC will not only explain the basics of microfabrication but also show the practice through videos.

    Doctoral Program in Microsystems and Microelectronics
    Teachers: Brugger Jürgen, Gijs Martinus
    Language: english
    Academic term: 2024-2025


  • Microfabrication practicals

    The goal of this course is to introduce students to the practical aspects of some basic micro-fabrication techniques.

    Section of Microtechnics
    Teachers: Brugger Jürgen, Sayah Abdeljalil
    Language: english
    Academic term: 2024-2025


  • Microfabrication technologies

    The student will learn process techniques and applications of modern micro- and nanofabrication, as practiced in a clean room, with a focus on silicon, but also multi-material microsystems and flexible/stretchable systems technologies.

    Section of Microtechnics
    Teachers: Brugger Jürgen
    Language: english
    Academic term: 2024-2025


  • Nanotechnology

    This course gives the basics for understanding nanotechnology from an engineer's perspective: physical background, materials aspects and scaling laws, fabrication and imaging of nanoscale devices.

    Section of Microtechnics
    Teachers: Brugger Jürgen, Boero Giovanni
    Language: english
    Academic term: 2024-2025


  • Soft Microsystems Processing and Devices

    Amongst others, following topics will be covered during the course: - Soft Microsystems and Electronics - Electroactive polymers - Printed electronics and microsystems - Inkjet printing of polymers - Stretchable electronics - Mechanical reliability - Stencil lithography - Scanning Probe Lithography

    Doctoral Program in Microsystems and Microelectronics
    Teachers: Brugger Jürgen, Lacour Stéphanie, Subramanian Vivek, Leterrier Yves, Shea Herbert, Briand Danick
    Language: english
    Academic term: 2024-2025


  • Teaching MER. Giovanni Boero

  • General physics : electromagnetism

    Introduction to fluids mechanics, to electromagnetism, and to wave phenomena.

    Section of Microtechnics
    Teachers: Boero Giovanni
    Language: french
    Academic term: 2024-2025


  • MEMS practicals I

    Objective of this practical is to apply in specific experimental settings the knowledge acquired in various MEMS related class

    Section of Microtechnics
    Teachers: Brugger Jürgen, Bertsch Arnaud, Boero Giovanni
    Language: english
    Academic term: 2024-2025


  • MEMS practicals II

    Objective of this practical is to apply in specific experimental settings the knowledge acquired in various MEMS related class

    Section of Microtechnics
    Teachers: Boero Giovanni, Brugger Jürgen, Bertsch Arnaud
    Language: english
    Academic term: 2024-2025


  • Micro-magnetic field sensors and actuators

    The course provides the basis to understand the physics, the key performance, and the research and industrial applications of magnetic sensors and actuators. Together with a detailed introduction to magnetism, several magnetic sensors and actuators are studied.

    Doctoral Program in Microsystems and Microelectronics
    Teachers: Boero Giovanni
    Language: english
    Academic term: 2024-2025


  • Nanotechnology

    This course gives the basics for understanding nanotechnology from an engineer's perspective: physical background, materials aspects and scaling laws, fabrication and imaging of nanoscale devices.

    Section of Microtechnics
    Teachers: Brugger Jürgen, Boero Giovanni
    Language: english
    Academic term: 2024-2025


  • Robotics practicals

    The practicals can include the following topics:
    • Teaching Robots to Accomplish a Manipulation Task
    • Experimenting with haptic interfaces
    • Controlling a serial robot ABB IRB 120
    • Control of the Micro Delta Direct Drive robot
    • LiniX, linear axis, assembly and control

      Doctoral program in robotics, control, and intelligent systems
      Teachers: Floreano Dario, Billard Aude, Kneib Jean-Paul Richard, Sakar Mahmut Selman, Bouri Mohamed, Mondada Francesco, Micera Silvestro, Skaloud Jan, Boero Giovanni
      Language: english
      Academic term: 2024-2025


    • Sensors

      Physical principles and electronics used in sensors. Applications of sensors.

      Section of Mechanical Engineering
      Teachers: Boero Giovanni, Shea Herbert
      Language: french
      Academic term: 2024-2025