On this page, you will find articles and other publications from our laboratory, sorted by year. If you want to search the database, please use the EPFL infoscience website.
You can also have a look at the theses done at the LMM and talks given by LMM members in the left hand menu.
Warning
Please note that the publication lists from Infoscience integrated into the EPFL website, lab or people pages are frozen following the launch of the new version of platform. The owners of these pages are invited to recreate their publication list from Infoscience. For any assistance, please consult the Infoscience help or contact support.
2024
Datasets
Nanoindentation hardness and modulus of Al2O3-SiO2-CaO and MnO-SiO2-FeO inclusions in iron
2024.2023
Journal Articles
On the slip burst amplitude cutoff in dislocation-rich microcrystals
Acta Materialia. 2023-12-09. Vol. 264, p. 119582. DOI : 10.1016/j.actamat.2023.119582.Room-temperature strength of the interfacial bond between silica inclusions and iron
Acta Materialia. 2023-11-09. Vol. 263, p. 119502. DOI : 10.1016/j.actamat.2023.119502.Intermittent tensile deformation of silver microcastings: Influence of the strain rate
Scripta Materialia. 2023-10-14. Vol. 239, p. 115820. DOI : 10.1016/j.scriptamat.2023.115820.Phase Transformation-Induced Interfacial Debonding of Silica Inclusions in Iron
Metallurgical And Materials Transactions B-Process Metallurgy And Materials Processing Science. 2023-10-25. Vol. 55, num. 1, p. 1-7. DOI : 10.1007/s11663-023-02939-6.The effect of size, orientation and temperature on the deformation of microcast silver crystals
Acta Materialia. 2023-03-10. Vol. 249, p. 118817. DOI : 10.1016/j.actamat.2023.118817.Nanoindentation of embedded particles
Journal Of Materials Research. 2023-02-10. DOI : 10.1557/s43578-023-00920-2.Liquid metal infiltration of silicon based alloys into porous carbonaceous materials Part-III: Experimental verification of conversion products and infiltration depth by infiltration of Si-Zr alloy into mixed SiC/ graphite preforms
Journal Of The European Ceramic Society. 2023-01-01. Vol. 43, num. 1, p. 47-53. DOI : 10.1016/j.jeurceramsoc.2022.09.036.Theses
Micromechanics of oxide inclusions in ferrous alloys
Lausanne, EPFL, 2023.Bringing casting to microfabrication: processing and deformation of microcastings
Lausanne, EPFL, 2023.2022
Journal Articles
On the bulk compressibility of close-packed particles and their composites
Composites Part A-Applied Science And Manufacturing. 2022-10-01. Vol. 161, p. 107106. DOI : 10.1016/j.compositesa.2022.107106.Coupling silicon lithography with metal casting
Applied Materials Today. 2022-12-01. Vol. 29, p. 101647. DOI : 10.1016/j.apmt.2022.101647.Strong silicon oxide inclusions in iron
Acta Materialia. 2022. Vol. 242, p. 118437. DOI : 10.1016/j.actamat.2022.118437.Light-Based Printing of Leachable Salt Molds for Facile Shaping of Complex Structures
Advanced Materials. 2022-07-05. p. 2203878. DOI : 10.1002/adma.202203878.The thermally activated deformation behaviour of single-crystalline microcast aluminium wires
Acta Materialia. 2022-08-01. Vol. 234, p. 118037. DOI : 10.1016/j.actamat.2022.118037.A method for cleaning flat punch diamond microprobe tips
Micron. 2022-04-01. Vol. 155, p. 103217. DOI : 10.1016/j.micron.2022.103217.Investment casting of periodic aluminum cellular structures using slurry-cast table salt moulds
Materials & Design. 2022-03-01. Vol. 215, p. 110488. DOI : 10.1016/j.matdes.2022.110488.Liquid metal infiltration of silicon based alloys into porous carbonaceous materials. Part I: Modelling of channel filling and reaction phase formation
Journal Of The European Ceramic Society. 2022-05-01. Vol. 42, num. 5, p. 1971-1983. DOI : 10.1016/j.jeurceramsoc.2021.12.068.Liquid metal infiltration of silicon based alloys into porous carbonaceous materials. Part II: Experimental verification of modelling approaches by infiltration of Si-Zr alloy into idealized microchannels
Journal Of The European Ceramic Society. 2022-05-01. Vol. 42, num. 5, p. 1984-1994. DOI : 10.1016/j.jeurceramsoc.2022.01.004.2021
Journal Articles
Surface energy contributions to the work of infiltration in metal matrix composite processing
Scripta Materialia. 2021-08-27. Vol. 206, p. 114223. DOI : 10.1016/j.scriptamat.2021.114223.3D metal freeform micromanufacturing
Journal of Manufacturing Processes. 2021-06-23. Vol. 68, p. 867-876. DOI : 10.1016/j.jmapro.2021.06.002.Simulating Infiltration as a Sequence of Pinning and De-pinning Processes
Acta Materialia. 2021-05-15. Vol. 210, p. 116831. DOI : 10.1016/j.actamat.2021.116831.Finite element simulation of the Portevin-Le Chatelier effect in highly reinforced metal matrix composites
Philosophical Magazine. 2021-05-05. Vol. 101, num. 12, p. 1471-1489. DOI : 10.1080/14786435.2021.1919331.Processing and micro-mechanical characterization of multi-component transition MC carbides in iron
Journal of the European Ceramic Society. 2021-03-06. Vol. 41, num. 7, p. 3937-3946. DOI : 10.1016/j.jeurceramsoc.2021.02.044.Theses
Study and characterization of silicon metal alloys systems for the reactive infiltration process of ceramic matrix composites
Lausanne, EPFL, 2021.2020
Journal Articles
Kinetic processes in the high-temperature pressure-infiltration of Al into Al2O3
Acta Materialia. 2020-02-26. Vol. 189, p. 105-117. DOI : 10.1016/j.actamat.2020.02.048.Mechanical properties and cytocompatibility of dense and porous Zn produced by laser powder bed fusion for biodegradable implant applications
Acta Biomaterialia. 2020-07-01. Vol. 110, p. 289-302. DOI : 10.1016/j.actbio.2020.04.006.2019
Journal Articles
Influence of interfacial structural disorder and/or chemical interdiffusion on thermal boundary conductance for Ti/Si and Au/Si couples
Journal Of Applied Physics. 2019-10-21. Vol. 126, num. 15, p. 155302. DOI : 10.1063/1.5114671.Role of the electron-phonon coupling on the thermal boundary conductance of metal/diamond interfaces with nanometric interlayers
Journal Of Applied Physics. 2019-10-28. Vol. 126, num. 16, p. 165302. DOI : 10.1063/1.5115823.Mechanical properties of replicated cellular Zn and Zn1.5Mg in uniaxial compression
Materials Characterization. 2019-11-01. Vol. 157, p. 109895. DOI : 10.1016/j.matchar.2019.109895.Studying the wettability of Si and eutectic Si-Zr alloy on carbon and silicon carbide by sessile drop experiments
Journal Of The European Ceramic Society. 2019-04-01. Vol. 39, num. 4, p. 735-742. DOI : 10.1016/j.jeurceramsoc.2018.11.049.Laue microdiffraction characterisation of as-cast and tensile deformed Al microwires
Philosophical Magazine. 2019-04-17. p. 185503. DOI : 10.1080/14786435.2019.1605220.Erratum: Influence of the thickness of a nanometric copper interlayer on Au/dielectric thermal boundary conductance (vol 124, 105304, 2018)
Journal Of Applied Physics. 2019-04-14. Vol. 125, num. 14, p. 149901. DOI : 10.1063/1.5096856.Towards a coherent database of thermal boundary conductance at metal/dielectric interfaces
Journal of Applied Physics. 2019-03-07. Vol. 125, num. 9, p. 095302. DOI : 10.1063/1.5085176.The effect of size on the plastic deformation of annealed cast aluminium microwires
Scripta Materialia. 2019-03-01. Vol. 161, p. 58-61. DOI : 10.1016/j.scriptamat.2018.10.009.Theses
Heat-transfer at the interface between a metal and a non-metal: influence of ultra-thin interlayers, interface chemistry and atomic order
Lausanne, EPFL, 2019.Dynamic wetting in pressure-infiltration of ceramic particle preforms by molten metal
Lausanne, EPFL, 2019.2018
Journal Articles
Stress relaxation in the presence of sudden strain bursts: Methodology and stress relaxation data of microcast aluminium microwires
Data In Brief. 2018-12-01. Vol. 21, p. 2134-2141. DOI : 10.1016/j.dib.2018.11.047.On the diametric compression strength test of brittle spherical particles
European Journal Of Mechanics A-Solids. 2018-11-01. Vol. 72, p. 148-154. DOI : 10.1016/j.euromechsol.2018.04.016.Influence of the thickness of a nanometric copper interlayer on Au/dielectric thermal boundary conductance
Journal Of Applied Physics. 2018-09-14. Vol. 124, num. 10, p. 105304. DOI : 10.1063/1.5030049.Meridian crack test strength of plasma-sprayed amorphous and nanocrystalline ceramic microparticles
ACTA MATERIALIA. 2018. Vol. 145, p. 278-289. DOI : 10.1016/j.actamat.2017.12.031.Intermetallic beta-Ti3Au hard thin films prepared by magnetron sputtering
THIN SOLID FILMS. 2018. Vol. 646, p. 1-11. DOI : 10.1016/j.tsf.2017.11.027.In-situ strength of individual silicon particles within an aluminium casting alloy
Acta Materialia. 2018. Vol. 143, p. 67-76. DOI : 10.1016/j.actamat.2017.09.058.Theses
Mechanical properties of MC multimetallic carbides in steel
Lausanne, EPFL, 2018.Thermal Activation, Intermittency and Size Effects in the Plastic Deformation of Cast Aluminium Microwires
Lausanne, EPFL, 2018.2017
Journal Articles
Stable room-temperature micron-scale crack growth in single-crystalline silicon
Journal Of Materials Research. 2017. Vol. 32, num. 19, p. 3617-3626. DOI : 10.1557/jmr.2017.238.The local strength of individual alumina particles
Journal Of The Mechanics And Physics Of Solids. 2017. Vol. 109, p. 34-49. DOI : 10.1016/j.jmps.2017.08.005.Cast aluminium single crystals cross the threshold from bulk to size-dependent stochastic plasticity
Nature Materials. 2017. Vol. 16, p. 730–736. DOI : 10.1038/nmat4911.Effects of partial crystallization in Pt-Si-B-based bulk metallic glasses on glass transition and crystallization of the remaining amorphous matrix
Journal of Non-Crystalline Solids. 2017. Vol. 460, p. 66-73. DOI : 10.1016/j.jnoncrysol.2017.01.025.Occurrence of the Portevin Le-Chatelier effect in open-cell microcellular Al-2 wt% Mg
Scripta Materialia. 2017. Vol. 132, p. 13-16. DOI : 10.1016/j.scriptamat.2017.01.020.Compression testing spherical particles for strength: Theory of the meridian crack test and implementation for microscopic fused quartz
Journal Of The Mechanics And Physics Of Solids. 2017. Vol. 99, p. 70-92. DOI : 10.1016/j.jmps.2016.11.009.Development of a new family of phosphorous-free Pt-based bulk metallic glasses
Journal Of Alloys And Compounds. 2017. Vol. 695, p. 3419-3428. DOI : 10.1016/j.jallcom.2016.12.017.Fluid flow through replicated microcellular materials in the Darcy-Forchheimer regime
Acta Materialia. 2017. Vol. 126, p. 280-293. DOI : 10.1016/j.actamat.2016.12.067.Silicon particle pinhole defects in aluminium–silicon alloys
Journal of Materials Science. 2017. Vol. 52, num. 2, p. 858-868. DOI : 10.1007/s10853-016-0381-y.Conference Papers
Femtosecond laser assisted 3-dimensional freeform fabrication of metal microstructures in fused silica
2017. Conference on Frontiers in Ultrafast Optics – Biomedical, Scientific, and Industrial Applications XVII, San Francisco, CA, JAN 29-FEB 02, 2017. p. 100940U. DOI : 10.1117/12.2256550.Theses
Probing the micromechanical strength of oxide ceramic composite reinforcements
Lausanne, EPFL, 2017.Strength and fracture of silicon second-phase particles in aluminium casting alloys
Lausanne, EPFL, 2017.Replicated microcellular aluminium structures for thermal management
Lausanne, EPFL, 2017.Alloy development of a new platinum-based bulk metallic glass
Lausanne, EPFL, 2017.Patents
Small-scale metal castings, small-scale metal/transparent composite structures and process to produce same
US10821505; EP3374106; US2018304352; EP3374106; WO2017081635.
2017.2016
Journal Articles
Effect of hydrostatic pressure on flow and deformation in highly reinforced particulate composites
Acta Materialia. 2016. Vol. 117, p. 345-355. DOI : 10.1016/j.actamat.2016.06.052.Effect of Ca addition on interface formation in Al(Ca)/Al2O3 composites prepared by gas pressure assisted infiltration
Materials & Design. 2016. Vol. 108, p. 618-623. DOI : 10.1016/j.matdes.2016.07.034.Microscopic strength of silicon particles in an aluminium–silicon alloy
Acta Materialia. 2016. Vol. 105, p. 165-175. DOI : 10.1016/j.actamat.2015.12.006.Fracture toughness measurement in fused quartz using triangular chevron-notched micro-cantilevers
Scripta Materialia. 2016. Vol. 112, p. 132-135. DOI : 10.1016/j.scriptamat.2015.09.032.Theses
Visualisation of magnetic domain structures and magnetisation processes in Goss-oriented, high permeability steels using neutron grating interferometry
Lausanne, EPFL, 2016.2015
Journal Articles
The local strength of microscopic alumina reinforcements
Acta Materialia. 2015. Vol. 100, p. 215-223. DOI : 10.1016/j.actamat.2015.08.026.On measuring fracture toughness under load control in the presence of slow crack growth
Journal Of The European Ceramic Society. 2015. Vol. 35, num. 11, p. 3155-3166. DOI : 10.1016/j.jeurceramsoc.2015.04.004.Influence of the wetting angle on capillary forces in pressure infiltration
Acta Materialia. 2015. Vol. 91, p. 57-69. DOI : 10.1016/j.actamat.2015.03.002.Fracture toughness testing of nanocrystalline alumina and fused quartz using chevron-notched microbeams
Acta Materialia. 2015. Vol. 86, p. 385-395. DOI : 10.1016/j.actamat.2014.12.016.Influence of a Nanometric Al2O3 Interlayer on the Thermal Conductance of an Al/(Si, Diamond) Interface
Advanced Engineering Materials. 2015. Vol. 17, num. 1, p. 68-75. DOI : 10.1002/adem.201400060.Designing laminated metal composites for tensile ductility
Materials & Design. 2015. Vol. 66, p. 412-420. DOI : 10.1016/j.matdes.2014.08.061.Theses
Cast aluminium microwires
Lausanne, EPFL, 2015.Talks
Capillarity in pressure infiltration: influence of percolation and wetting angle
High Temperature Capillarity conference (HTC-2015), Bad-Herrenalb, Germany, May 17–21, 2015.2014
Journal Articles
Percolation and Universal Scaling in Composite Infiltration Processing
Materials Research Letters. 2014. Vol. 3, num. 1, p. 7-15. DOI : 10.1080/21663831.2014.948692.Infiltrated Cu8Al-Ti alumina composites
Composites Part A-Applied Science And Manufacturing. 2014. Vol. 66, p. 1-15. DOI : 10.1016/j.compositesa.2014.06.019.Infiltration of tin bronze into alumina particle beds: influence of alloy chemistry on drainage curves
Journal Of Materials Science. 2014. Vol. 49, num. 22, p. 7669-7678. DOI : 10.1007/s10853-014-8475-x.Tensile elongation of unidirectional or laminated composites combining a brittle reinforcement with a ductile strain and strain-rate hardening matrix
Acta Materialia. 2014. Vol. 71, p. 31-43. DOI : 10.1016/j.actamat.2014.02.043.Thermal boundary conductance between refractory metal carbides and diamond
Acta Materialia. 2014. Vol. 73, p. 337-346. DOI : 10.1016/j.actamat.2014.04.024.Qualitative link between work of adhesion and thermal conductance of metal/diamond interfaces
Journal of Applied Physics. 2014. Vol. 115, num. 12, p. 123509. DOI : 10.1063/1.4869668.Influence of microstructural heterogeneity on the scaling between flow stress and relative density in microcellular Al-4.5 %Cu
Journal Of Materials Science. 2014. Vol. 49, num. 6, p. 2403-2414. DOI : 10.1007/s10853-013-7852-1.Theses
Capillarity in Pressure-Infiltration of Ceramic Particle Preforms by Molten Metal
Lausanne, EPFL, 2014.Talks
Metal diamond composites: Challenges in interface design
Invited Talk, EMPA, Dübendorf, Switzerland, June 16, 2014.Probing the microscopic strength of metal composite reinforcements
Invited Talk, Dept. of Materials Science and Engineering of the Technion, Israel Institute of Technology, Haifa, Israel, May 22, 2014.Capillarity in infiltration
Invited Talk, Dept. of Materials Science and Engineering of the Technion, Israel Institute of Technology, Haifa, Israel, May 18, 2014.Load Drop and Slip Step Statistics in Cast Aluminium and Magnesium Microwires
TMS Sping Meeting 2014, San Diego, CA, USA, February 17, 2014.Copper matrix composites; processing, properties and a new in-situ process
Xth scientific congress of the Materials Institute of the University of Alicante, Alicante, Spain, January 23-24, 2014.2013
Journal Articles
Effect of diamond surface orientation on the thermal boundary conductance between diamond and aluminum
Diamond and Related Materials. 2013. Vol. 39, p. 8-13. DOI : 10.1016/j.diamond.2013.06.017.Influence of diamond surface termination on thermal boundary conductance between Al and diamond
Journal of Applied Physics. 2013. Vol. 113, num. 18, p. 183504. DOI : 10.1063/1.4804061.In situ copper–alumina composites
Materials Science and Engineering: A. 2013. Vol. 585, p. 396-407. DOI : 10.1016/j.msea.2013.07.074.Scaling of conductivity and Young’s modulus in replicated microcellular materials
Journal of Materials Science. 2013. Vol. 48, p. 8140-8146. DOI : 10.1007/s10853-013-7626-9.The plasticity size effect in replicated microcellular aluminium
Scripta Materialia. 2013. Vol. 69, num. 6, p. 469-472. DOI : 10.1016/j.scriptamat.2013.05.044.Influence of quench rate and microstructure on bendability of AA6016 aluminum alloys
Materials Science and Engineering: A. 2013. Vol. 559, p. 558-565. DOI : 10.1016/j.msea.2012.08.141.On the load-bearing efficiency of open-cell foams: A comparison of two architectures related to two processes
Scripta Materialia. 2013. Vol. 68, num. 1, p. 44-49. DOI : 10.1016/j.scriptamat.2012.05.048.Theses
Thermal Boundary Conductance between metals and dielectrics
Lausanne, EPFL, 2013.Plasticity in bcc single crystals investigated by Laue diffraction during micro-compression
Lausanne, EPFL, 2013.Effect of different loading conditions on the accumulation of residual strain in a creep resistant 1%CrMoV steel
Lausanne, EPFL, 2013.First-principles investigation of the optical properties of gold and its alloys
Lausanne, EPFL, 2013.Posters
Effect of a nm-sized interlayer on the Thermal Boundary Conductance between metals and diamond
MRS Spring Meeting 2013, San Francisco, April 1-5, 2013.Talks
Probing the microscopic strength of alumina reinforcements
EDMX day 2013, EPFL, Lausanne, 06 September 2013.Characterization of the glassy state and of crystallization in phosphorous-free Pt-based BMGs
MRS Fall meeting 2013, Boston, MA, USA, December 1-5, 2013.Thermal Boundary Conductance in Metal Matrix Composites: Influence of Interface Condition on Overall Thermal Conductivity
MRS Spring Meeting 2013, San Francisco, California, USA, April 1-5, 2013.2012
Journal Articles
On measuring wettability in infiltration processing (vol 56, pg 859, 2007)
Scripta Materialia. 2012. Vol. 67, num. 5, p. 519-520. DOI : 10.1016/j.scriptamat.2012.06.001.Solid solubility of germanium in silver
Thermochimica Acta. 2012. Vol. 544, p. 57-62. DOI : 10.1016/j.tca.2012.06.018.Thermal boundary conductance of transition metals on diamond
Emerging Materials Research. 2012. Vol. 1, num. 2, p. 89-98. DOI : 10.1680/emr.11.00011.Capillarity in pressure infiltration: improvements in characterization of high-temperature systems
Journal of Materials Science. 2012. Vol. 47, num. 24, p. 8419-8430. DOI : 10.1007/s10853-012-6645-2.Al2O3 particle rounding in molten copper and Cu8wt%Al
Journal Of Materials Science. 2012. Vol. 47, p. 6346-6353. DOI : 10.1007/s10853-012-6559-z.An analysis of the tensile elongation to failure of laminated metal composites in the presence of strain-rate hardening
Acta Materialia. 2012. Vol. 60, num. 5, p. 2265-2276. DOI : 10.1016/j.actamat.2011.12.041.Tensile strength of axially loaded unidirectional Nextel 610 (TM) reinforced aluminium: A case study in local load sharing between randomly distributed fibres
Composites Part A-Applied Science And Manufacturing. 2012. Vol. 43, p. 129-137. DOI : 10.1016/j.compositesa.2011.09.027.Fracture of convoluted and lamellar α2 + γ TiAl alloys
Intermetallics. 2012. Vol. 22, p. 176-188. DOI : 10.1016/j.intermet.2011.11.001.Theses
Microstructure of single crystal Ni-based superalloys during blade manufacturing process and creep deformation
Lausanne, EPFL, 2012.Processing and Mechanical Properties of Alumina Reinforced Copper-Aluminum Composites
Lausanne, EPFL, 2012.Talks
Plasticity effects in microcellular aluminium
Seminar, Fraunhofer Institute for Mechanics of Materials IWM, Freiburg, Nov. 16, 2012.Processing of alumina reinforced aluminium bronze
Functional and Innovative Composites symposium, “MST’12” Materials Science and Technology 2012 Conference and Exhibition, Pittsburgh PA, Oct. 7-11, 2012.Cast aluminium microsamples: processing and tensile behaviour
16th Int. Conf. on the Strength of Materials (ICSMA16), Bengaluru, India, August 21, 2012.Microcellular aluminium by replication
13th International Conference on Aluminum Alloys (ICAA-13), Carnegie Mellon University, Pittsburgh, PA, USA, June 3-7, 2012.Patents
Platinum based alloys
US10106869; JP6243327; CN103534369; HK1195596; ES2558011; EP2705170; JP2014514456; US2014096874; EP2705170; CN103534369; WO2012150558.
2012.Composite material comprising a precious metal, manufacturing process and use of such a material
EP2683841; US9695090; RU2578305; US2016060180; JP5824075; US9096917; RU2013144905; JP2014513204; EP2683841; CN103492598; US2013344316; WO2012119647.
2012.Porous metal article and method of producing a porous metal article
ES2363052.
2012.2011
Journal Articles
Effective hydrogen diffusion coefficient for solidifying aluminium alloys
Acta Materialia. 2011. Vol. 59, p. 2302-2308. DOI : 10.1016/j.actamat.2010.12.022.On measured activation volumes as relevant to ratcheting or cyclic creep
Scripta Materialia. 2011. Vol. 65, num. 9, p. 787-790. DOI : 10.1016/j.scriptamat.2011.07.032.Activation volume in microcellular aluminium: Size effects in thermally activated plastic flow
Acta Materialia. 2011. Vol. 59, num. 18, p. 6869-6879. DOI : 10.1016/j.actamat.2011.07.021.Multiaxial yield behaviour of Al replicated foam
Journal of the Mechanics and Physics of Solids. 2011. Vol. 59, num. 9, p. 1777-1793. DOI : 10.1016/j.jmps.2011.05.015.Laminated Metal Composites by Infiltration
Metallurgical and Materials Transactions A. 2011. Vol. 42, num. 11, p. 3509-3520. DOI : 10.1007/s11661-011-0756-2.Thermally activated deformation of two- and three-variant nanotwinned L10 Au–Cu–Pt
Intermetallics. 2011. Vol. 19, num. 7, p. 988-996. DOI : 10.1016/j.intermet.2011.03.002.L10 nanotwinned gold-rich Au–Cu–Pt
Acta Materialia. 2011. Vol. 59, num. 8, p. 3184-3195. DOI : 10.1016/j.actamat.2011.01.058.Influence of sample processing parameters on thermal boundary conductance value in an Al/AlN system
Applied Physics Letters. 2011. Vol. 98, num. 9, p. 091905. DOI : 10.1063/1.3560469.Thermal conductivity and interfacial conductance of AlN particle reinforced metal matrix composites
Journal of Applied Physics. 2011. Vol. 109, num. 6, p. 064907. DOI : 10.1063/1.3553870.Solid state transformations of Au-Cu-Pt alloys studied by in-situ X-ray synchrotron radiation and DSC
Intermetallics. 2011. Vol. 19, num. 5, p. 726-737. DOI : 10.1016/j.intermet.2011.01.014.Hole and notch sensitivity of aluminium replicated foam
Acta Materialia. 2011. Vol. 59, num. 2, p. 572-581. DOI : 10.1016/j.actamat.2010.09.061.Fatigue and cyclic creep of replicated microcellular aluminium
Materials Science and Engineering: A. 2011. Vol. 528, num. 6, p. 2657-2663. DOI : 10.1016/j.msea.2010.12.007.Influence of the elastic properties of the phases on the coefficient of thermal expansion of a metal matrix composite
Scripta Materialia. 2011. Vol. 64, num. 2, p. 153-156. DOI : 10.1016/j.scriptamat.2010.09.032.Creep of replicated microcellular aluminium
Acta Materialia. 2011. Vol. 59, num. 2, p. 440-450. DOI : 10.1016/j.actamat.2010.09.037.Theses
Molecular Dynamics Simulations of Helium Atoms Clustering in bcc Iron
Lausanne, EPFL, 2011.Talks
Plastic Deformation and Creep of Microcellular Metals: Theory and Experiment
Symposium on Fibers, Foams and Composites: Science and Engineering, Materials Science & Technology 2011 Conference & Exhibition, Columbus, Ohio, USA, October 16-20, 2011.Steel-Magnesium Laminated Composites by Infiltration
IMRC XX, Cancun, Mexico, August 17, 2011.Tensile Instability in Unidirectional Ductile/Ductile Phase Composites
MS&T 2011, Columbus, OH, USA, October 19, 2011.Silver-diamond composites with isotropic thermal conductivity up to 1000 W/mK
Euromat 2011, Montpellier, France, September 15, 2011.Assessement of interfacial layer materials to maximize Thermal Boundary Conductance between copper and diamond
Euromat 2011, Montpellier, France, September 15, 2011.The Investment Casting of Copper at the Microsacle
Euromat 2011, Montpellier, France, September 15, 2011.Casting and Testing of Aluminium Microsamples
Euromat 2011, Montpellier, France, September 13, 2011.Casting and Testing of Cast metallic Microsamples
TMS 2011 140th Annual Meeting & Exhibition, San Diego, California, USA, March 3, 2011.Copper Matrix Composites reinforced with a High Fraction of Alumina Particles
TMS 2011 140th Annual Meeting & Exhibition, San Diego, California, USA, February 28, 2011.Plasticity Size Effects in Microcellular Aluminium
Int. Symp. on Physics of Materials (ISPMA12), Prague, Czech Republic, September 6, 2011.Porous Metals
Archimat doctoral 6-day school on “Materials by Design: Multimaterials, Multiscales, Architectures and Optimisation”, Autrans, France, May 26, 2011.Discrete liquid inclusions at grain boundaries: a study of leaded copper
Symposium A, E-MRS 2011 Spring Meeting, Nice, France, May 10, 2011.2010
Journal Articles
Improvement of elevated temperature mechanical properties of Cu–Ni–Sn–Pb alloys
Materials Science and Engineering: A. 2010. Vol. 527, num. 16-17, p. 4326-4333. DOI : 10.1016/j.msea.2010.03.056.Yield surface of polyurethane and aluminium replicated foam
Acta Materialia. 2010. Vol. 58, num. 15, p. 5168-5183. DOI : 10.1016/j.actamat.2010.05.053.Solidification of Al-4.5 wt pct Cu-Replicated Foams
Metallurgical and Materials Transactions A. 2010. Vol. 41, num. 8, p. 2048-2055. DOI : 10.1007/s11661-010-0297-0.Fracture toughness of Al replicated foam
Acta Materialia. 2010. Vol. 58, num. 14, p. 4590-4603. DOI : 10.1016/j.actamat.2010.04.025.Influence of reinforcement contiguity on the thermal expansion of alumina particle reinforced aluminium composites
International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde). 2010. Vol. 101, num. 09, p. 1113-1120. DOI : 10.3139/146.110388.Materials science: Pleated crystals
Nature. 2010. Vol. 468, num. 7326, p. 906-907. DOI : 10.1038/468906a.Influence of chemistry and microstructure on the activation volume of TiAl alloys
Intermetallics. 2010. Vol. 18, num. 11, p. 2145-2153. DOI : 10.1016/j.intermet.2010.06.022.Fracture of high volume fraction ceramic particle reinforced aluminium under multiaxial stress
Acta Materialia. 2010. Vol. 58, num. 11, p. 3895-3907. DOI : 10.1016/j.actamat.2010.03.037.Influence of processing route on electrical and thermal conductivity of Al/SiC composites with bimodal particle distribution
Journal of Materials Science. 2010. Vol. 45, num. 8, p. 2203-2209. DOI : 10.1007/s10853-009-4060-0.Measurement and anisotropy of grain boundary energy in Cu-1 wt.% PB
Scripta Materialia. 2010. Vol. 62, p. 262-265. DOI : 10.1016/j.scriptamat.2009.11.012.Reviews
Metal Matrix Composites
Annual Review of Materials Research. 2010. Vol. 40, num. 1, p. 243-270. DOI : 10.1146/annurev-matsci-070909-104511.Theses
Microstructure and Mechanical Behaviour of Ordered Au-Cu-Pt Alloys
Lausanne, EPFL, 2010.Optimization of Embedded Atom Method Interatomic Potentials to Simulate Defect Structures and Magnetism in [alpha]-Fe
Lausanne, EPFL, 2010.Deformation and Fracture Toughness of Two-Phase Titanium Aluminides
Lausanne, EPFL, 2010.An Atomistic Simulation Method for Oxygen Impurities in Aluminium Based on Variable Charge Molecular Dynamics
Lausanne, EPFL, 2010.Multiaxial Yield and Fracture of Replicated Microcellular Aluminium
Lausanne, EPFL, 2010.Deformation mechanism in nanocrystalline FCC metals studied by atomistic simulations
Lausanne, EPFL, 2010.Talks
Alumina Reinforced Copper
DGM- Fachausschuss “Metallische Verbundwerkstoffe und zellulare Metalle”, Karlsruher Institut für Technologie (KIT), November 3, 2010.Les métaux microcellulaires à pores ouverts: élaboration, propriétés et potentiel technologique
“Vingt-Troisièmes Entretiens” du Centre Jacques Cartier, Rhône-Alpes, Lyon, France, November 22, 2010.Multiaxial yield and fracture of microcellular aluminium
4th National Conference on Metallic Materials, Thessaloniki, November 5, 2010.Multiaxial yield and fracture of microcellular aluminium
University of Tokyo, Department of Materials, Tokyo, Japan, July 27, 2010.Isotropic Metal Composites: the case for strong ceramic particles
Nippon Steel Corporation, Corporate Research Laboratory, Futtsu, Japan, July 23, 2010.Multiaxial yield and fracture of replicated microcellular aluminium
HetMat symposium on Architectured Materials, Montalieu, July 15, 2010.Multiaxial yield of replicated microcellular aluminium
Journées annuelles de la société française de métallurgie et des matériaux, “Matériaux architecturée” symposium, Paris, France, June 22, 2010.Light metal composites: the case for strong ceramic particles
47th Sagamore Army Materials Research Conference, on Advanced Lightweight Metals Technology, St Michaels, MD, USA, June 15, 2010.Patents
Preform to produce metallic foam
BRPI0807646; JP5469465; CN101646790; US8151860; PL2118328; ES2363052; DE602008005559; AT502128; EP2118328; JP2010518258; CN101646790; US2010021758; EP2118328; WO2008099014; WO2008099014.
2010.2009
Journal Articles
Mechanical behaviour of diamond reinforced metals
Materials Science and Engineering A. 2009. Vol. 523, num. 1-2, p. 226-234. DOI : 10.1016/j.msea.2009.05.069.Particle fracture in high volume fraction ceramic reinforced metals: governing parameters and implications for composite failure
Journal of the Mechanics and Physics of Solids. 2009. Vol. 57, num. 11, p. 1781-1800. DOI : 10.1016/j.jmps.2009.08.005.Rigidity of diamond reinforced metals featuring high particle contents
Composites Science and Technology. 2009. Vol. 69, num. 10, p. 1660-1666. DOI : 10.1016/j.compscitech.2009.03.016.Intermediate temperature embrittlement of copper alloys
International Materials Reviews. 2009. Vol. 54, num. 2, p. 94-116. DOI : 10.1179/174328009X392967.Microstructure, Strength and Creep of Aluminium-nickel Open Cell Foam
Philosophical Magazine. 2009. Vol. 89, num. 13, p. 1121-1139. DOI : 10.1080/14786430902915396.Processing of Ag-Cu alloy foam by the replication process
Scripta Materialia. 2009. Vol. 61, p. 351-354. DOI : 10.1016/j.scriptamat.2009.04.024.Young’s modulus of ceramic particle reinforced aluminium: measurement by the Impulse Excitation Technique and confrontation with analytical models
Composites Part A. 2009. Vol. 40, p. 524-529. DOI : 10.1016/j.compositesa.2009.02.001.Dihedral Angles in Cu-1wt.%Pb: Grain Boundary Energy and Grain Boundary Triple Line Effects
Acta Materialia. 2009. Vol. 57, num. 8, p. 2527-2537. DOI : 10.1016/j.actamat.2009.02.009.In situ flow stress of pure aluminium constrained by tightly packed alumina fibres
Acta Materialia. 2009. Vol. 57, num. 6, p. 1795-1812. DOI : 10.1016/j.actamat.2008.12.024.Creep of aluminium-magnesium open cell foam
Acta Materialia. 2009. Vol. 57, p. 830-837. DOI : 10.1016/j.actamat.2008.10.019.Diamond-based Metal Matrix Composites for thermal Management – Potential and Limits
Advanced Materials Research. 2009. Vol. 59, p. 111-115. DOI : 10.4028/www.scientific.net/AMR.59.111.Ductile-to-brittle transition in tensile failure of particle reinforced metals
Journal of the Mechanics and Physics of Solids. 2009. Vol. 57, p. 473-499. DOI : 10.1016/j.jmps.2008.11.006.Surface oxide in replicated microcellular aluminium and its influence on the plasticity size effect
Acta Materialia. 2009. Vol. 57, p. 286-294. DOI : 10.1016/j.actamat.2008.09.008.Conference Papers
Size Effects in the Plastic Deformation of Highly Porous Aluminium
2009. IInd Inter. Workshop Correlation Microstructure Properties and Multiscale Modeling of Plasticity, Fuenteheridos, Spain, June 17-21, 2009. p. 101-106.Uniaxial deformation of microcellular metals: model systems and simplified analysis
2009. IUTAM symposium on Mechanical Properties of Cellular Materials, Cachan, France, Sept. 17-20. p. 1-8. DOI : 10.1007/978-1-4020-9404-0_1.Surface Modification of Diamonds in Diamond/Al-matrix Composites
2009. 1st International Conference on New Materials for Extreme Environments, San Sebastian, Spain, June 2-4, 2008. p. 125-130. DOI : 10.4028/www.scientific.net/AMR.59.125.Theses
In-situ Laue diffraction on deforming micropillars
Lausanne, EPFL, 2009.Intermediate temperature grain boundary phenomena in copper alloys
Lausanne, EPFL, 2009.Damage propagation and fracture in highly reinforced particulate metal matrix composites
Lausanne, EPFL, 2009.Micro-, meso- and macrostructures in replicated microcellular aluminium
Lausanne, EPFL, 2009.Talks
Processing reduced-density copper composites
Euromat 2009, Glasgow UK, September 8, 2009.Processing reduced-density copper composites
1st MACAN Conf. on Interfaces, Harnack House, Berlin, Germany, November 17, 2009.Open-Pore Microcellular Aluminium: Processing and Properties
EMPA PhD student symposium, Dübendorf, Switzerland, November 19, 2009.Metal/oxide composites: the case for a strong interface
1st MACAN Conf. on Interfaces, Harnack House, Berlin, Germany, November 17, 2009.Plastic deformation and steady state creep of microcellular metals: theory and experiment
Euromat 2009, Glasgow UK, September 8, 2009.Yield surface of replicated aluminium foams: measurement and general features
Metfoam 2009 conference, Bratislava SK, September 3, 2009.Creep of Replicated Open-Pore Microcellular Aluminium
International Conference on the Strength of Metals and Alloys, ICSMA 15, Dresden, Germany, August 18, 2009.Size Effects in the Plastic Deformation of Highly Porous Aluminium
II International “Correlation Microstructure Properties and Multiscale Modeling of Plasticity”, University of Seville, Fuenteheridos, Spain, June 20, 2009.Replicated Aluminium Structures: Architectural Tailoring at the Micro, Meso and Macro Scales
MRS 2009 Spring Meeting, San Francisco, USA, Symposium LL, April 14, 2009.Replication Processing of Open-pore Microcellular Aluminium
Sandia Technical Seminar, Sania National Laboratory, Livermore, California, USA, April 13, 2009.Replication Processing of Open-pore Microcellular Aluminium
MPIE Colloquium, Max-Planck Institut für Eisenforschung, Düsseldorf, February 12, 2009.Replicated Microcellular Aluminium: Processing and Properties
IMW-Seminar, Leibniz Institut für Festkörper- und Werkstoffforschung Dresden, January 8, 2009.2008
Journal Articles
The Intrinsic Permeability of Packed SiC Particles with Monomodal and Bimodal Size Distributions
Journal Of Composite Materials. 2008. Vol. 42, p. 2795-2804. DOI : 10.1177/0021998308096502.Thermal conductivity of aluminum matrix composites reinforced with mixtures of diamond and SiC particles
Scripta Materialia. 2008. Vol. 58, p. 393-396. DOI : 10.1016/j.scriptamat.2007.10.020.Measurement of damage evolution in continuous ceramic fibre-reinforced metals by acoustic emission
Scripta Materialia. 2008. Vol. 59, num. 8, p. 842-845. DOI : 10.1016/j.scriptamat.2008.06.027.Tensile flow stress of ceramic particle-reinforced metal in the presence of particle cracking
Acta Materialia. 2008. Vol. 56, num. 16, p. 4402-4416. DOI : 10.1016/j.actamat.2008.05.004.Thermal conductivity of Al-SiC composites with monomodal and bimodal particle size distribution
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2008. Vol. 480, num. 1-2, p. 483-488. DOI : 10.1016/j.msea.2007.07.026.Direct measurement of drainage curves in infiltration of SiC particle preforms: influence of interfacial reactivity
Journal Of Materials Science. 2008. Vol. 43, num. 15, p. 5061-5067. DOI : 10.1007/s10853-008-2670-6.Coordination measurements in compacted NaCl irregular powders using X-ray microtomography
Journal Of The European Ceramic Society. 2008. Vol. 28, num. 13, p. 2441-2449. DOI : 10.1016/j.jeurceramsoc.2008.03.041.Fifth International Conference on High Temperature Capillarity HTC-2007, Alicante, Spain Preface
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2008. Vol. 495, num. 1-2, p. 1-2. DOI : 10.1016/j.msea.2008.05.011.High-temperature wettability of aluminum nitride during liquid metal infiltration
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2008. Vol. 495, num. 1-2, p. 197-202. DOI : 10.1016/j.msea.2007.12.050.Equilibrium shape of a liquid intergranular inclusion in a stressed elastic solid
Scripta Materialia. 2008. Vol. 58, num. 7, p. 610-613. DOI : 10.1016/j.scriptamat.2007.11.024.Age-hardening Response of Replicated Microcellular Al-4.5%Cu
Advanced Engineering Materials. 2008. Vol. 10, num. 9, p. 849-852. DOI : 10.1002/adem.200800086.Direct measurement of drainage curves in infiltration of SiC particle preforms
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2008. Vol. 495, num. 1-2, p. 203-207. DOI : 10.1016/j.msea.2008.01.074.Fracture behavior of low-density replicated aluminum alloy foams
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2008. Vol. 496, num. 1-2, p. 376-382. DOI : 10.1016/j.msea.2008.05.036.Measurement of the effective activation volume in 45 XD titanium aluminides by repeated transient tests
Materials Science and Engineering A – Structural Materials Properties Microstructure and Processing. 2008. Vol. 487, p. 377-382. DOI : 10.1016/j.msea.2007.10.029.Conference Papers
Liquid metal infiltration into ceramic particle compacts chemically and morphologically heterogeneous
2008. 5th International Conference on High Temperature Capillarity, Alicante, SPAIN, Mar 21-24, 2007. p. 288-291. DOI : 10.1016/j.msea.2007.11.089.Age-Hardening Response of Replicated Microcellular Al-4.5%Cu
2008. 5th Biennial International Conference on Porous Metals and Metallic Foams (MetFoam 2007), Montreal, CANADA, Sep 05-07, 2007. p. 335-338.Influence of the gamma’ phase fraction on the gamma/gamma’ Topological inversion During high temperature Creep of Single Crystal Superalloys
2008. Superalloys 2008, 2008. p. 159-167. DOI : 10.7449/2008/Superalloys_2008_159_167.Ductile-to-brittle transition in tensile deformation of particle reinforced metals
2008. 17th European Conference on Fracture (ECF17), Brno, Czech Republic, 2-5 September 2008. p. 334-341 (on CD-Rom).Multiaxial yield behaviour of Al replicated foam
2008. Montreal, Canada, p. 339-342.Fracture toughness of TiAl alloys: A comparison of two gamma-a2 structures
2008. TMS 2008 Annual Meeting and Exhibition, New Orleans, March 9-13, 2008. p. 89-96.Theses
Deformation mechanisms of nanocrystalline nickel studied by in-situ X-ray diffraction
Lausanne, EPFL, 2008.High volume fraction particulate and interpenetrating phase composites (IPC)
Lausanne, EPFL, 2008.High-temperature wettability and thermal conductivity of aluminium nitride reinforced metal matrix composites
Lausanne, EPFL, 2008.Talks
High Temperature Fracture Toughness of Cast and Heat-Treated gamma/alpha2-TiAl Alloys
MSE 08, Nürnberg, Germany, September 1-4 2008.Fracture Toughness of TiAl Alloys : A Comparison of Two Gamma-Alpha2 Structures
TMS 2008 Annual Meeting and Exhibition, New Orleans,Series of 8 talks on the processing, deformation, damage and fracture of several heterogeneous materials
Internal seminar, University Carlos III, Madrid, September 15-18 2008.Creep behaviour of replicated open-pore aluminium and aluminium alloy foams
11th International conference on creep and fracture of engineering materials and structures, Bad Berneck, Germany, 5-9 may 2008.Replicated Open-Pore Microcellular Aluminium: Processing and Properties
Karlsruher Werkstoffkolloquium WS 2007/08, January 22, 2008.Processing reduced-density copper composites
Euromat Junior, Lausanne, Switzerland, July, 14.-18. 2008.2007
Journal Articles
On the steady-state creep of microcellular metals
Scripta Materialia. 2007. Vol. 57, num. 1, p. 33-36. DOI : 10.1016/j.scriptamat.2007.03.013.Infiltration of graphite preforms with Al-Si eutectic alloy and mercury
Scripta Materialia. 2007. Vol. 56, num. 11, p. 991. DOI : 10.1016/j.scriptamat.2007.01.042.Microcellular aluminium? Child’s play!
Advanced Engineering Materials. 2007. Vol. 9, num. 11, p. 951-954. DOI : 10.1002/adem.200700190.Spherical pore replicated Microcellular Aluminium
Materials Science and Engineering A. 2007. Vol. 465, num. 1-2, p. 124-135. DOI : 10.1016/j.msea.2007.02.002.Influence of the infiltration pressure on the structure and properties of replicated aluminium foams
Materials Science and Engineering A. 2007. Vol. 462, num. 1-2, p. 68-75. DOI : 10.1016/j.msea.2006.03.157.Diffusion-limited reactive wetting: effect of interfacial reaction behind the advancing triple line
Journal of Materials Science. 2007. Vol. 42, num. 19, p. 8071-8082. DOI : 10.1007/s10853-007-1915-0.On the influence of active element content on the thermal conductivity and thermal expansion of Cu-X (X = Cr, B) diamond composites
Scripta Materialia. 2007. Vol. 57, num. 11, p. 988-991. DOI : 10.1016/j.scriptamat.2007.08.007.Assessing predictive schemes for thermal conductivity against diamond-reinforced silver matrix composites at intermediate phase contrast
Scripta Materialia. 2007. Vol. 56, num. 5, p. 357-360. DOI : 10.1016/j.scriptamat.2006.11.008.On measuring wettability in infiltration processing
Scripta Materialia. 2007. Vol. 56, num. 10, p. 859-862. DOI : 10.1016/j.scriptamat.2007.02.002.Conference Papers
Highly Loaded Ceramic Particle Reinforced Metal: Role of Particle Fracture
2007.Theses
Characterization of capillary forces during liquid metal infiltration
Lausanne, EPFL, 2007.Tensile behaviour of discontinuous two-phase materials
Lausanne, EPFL, 2007.Book Chapters
Introductory article
Concise Encyclopedia of Composite Materials – 2nd Ed.; Elsevier Science, 2007.Posters
Plasticity Size Effects in Microcellular Aluminum
International workshop on Small Scale Plasticity , Braunwald, Switzerland, september 2007.Lead substitution by bismuth in free-cutting brasses: from interfacial energy changes to mechanical property prediction
Intergranular and Interphase Boundaries 2007, Barcelona, Spain, 10-13 July 2007.Dihedral angle evolution through deformation and annealing of Cu-1Pb
Intergranular and Interphase Boundaries 2007, Barcelona, Spain, 10-13 July 2007.Interrelation between the shape of inclusions at grain boundaries and the grain boundary energy in the model alloy Cu-1wt%Pb
High Temperature Capillarity 2007, Alicante, Spain, 21-24 March 2007.Talks
Creep Behaviour of replicated aluminium foams: Comparison between model and experiment
HetMat workshop, Université Catholique de louvain la Neuve, Belgium, April 2007.Replication Processing of Open-Pore Microcellular Aluminium
TS-seminar, CERN, Geneva, November 28, 2007.Uniaxial deformation of microcellular metals: a model system and simplified analysis
Uniaxial deformation of microcellular metals: a model system and simplified analysis, Paris, France, September 17 2007.Replication Processing of Highly Porous Microcellular Aluminium
Invited Seminar, University of Tokyo, Materials Department, July 13 2007.Of Packed Spheres and Material Microstructures
Paul-Peter Ewald Kolloquium 2007, Max-Planck-Institut für Metallforschung, Stuttgart, July, 6. 2008.Replicated microcellular aluminium
82nd general meeting of the SVMT, Zürich,Highly loaded ceramic particle reinforced metal: role of particle fracture
International Conference on Composite Materials ICCM 16, Kyoto, Japan,Multiaxial Yield Behaviour of Al Replicated Foam
MetFoam 2007, Montreal, Canada,Size Effect in Microcellular Aluminium Plasticity
Gordon Laboratory Seminar Series, Cambridge, UK, 25 May 2007.Damage and fracture of particle-reinforced metal matrix composite
FEMS Euromat, Nürnberg, Germany, September 10-13.2006
Journal Articles
Temperature dependence of lattice mismatch and gamma’ volume fraction of a fourth-generation monocrystalline nickel-based superalloy
International Journal of Materials Research. 2006. Vol. 97, p. 1136-1142. DOI : 10.3139/146.101350.Relationship between morphological Evolution of the gamma/gamma’ Microstructure and Creep Behaviour of Ni-based Single Crystal Superalloys
TMS Letters. 2006. Vol. 3, p. 47-48.Reactivity and thermal behaviour ofCu-Si/SiC composites: effects of SiC oxidation
Materials Science and Technology. 2006. Vol. 22, num. 12, p. 1464-1468. DOI : 10.1179/174328406X131000.The electrical conductivity of microcellular metals
Journal Of Applied Physics. 2006. Vol. 100, num. 4, p. 044912. DOI : 10.1063/1.2335672.Sintering of NaCl powder: Mechanisms and first stage kinetics
Journal Of The European Ceramic Society. 2006. Vol. 26, num. 16, p. 3487-3497. DOI : 10.1016/j.jeurceramsoc.2005.12.020.Capillary shape equilibration of liquid inclusions embedded in a partly soluble solid
Scripta Materialia. 2006. Vol. 55, num. 10, p. 955. DOI : 10.1016/j.scriptamat.2006.06.036.Uniaxial deformation of microcellular metals
Acta Materialia. 2006. Vol. 54, num. 16, p. 4129. DOI : 10.1016/j.actamat.2006.03.054.Replication processing of highly porous materials
ADVANCED ENGINEERING MATERIALS. 2006. Vol. 8, num. 9, p. 795-803. DOI : 10.1002/adem.200600077.Functional grading of metal foam cores for yield-limited lightweight sandwich beams
Scripta Materialia. 2006. Vol. 54, num. 4 SPEC. ISS., p. 539. DOI : 10.1016/j.scriptamat.2005.10.050.The effect of preform processing on replicated aluminium foam structure and mechanical properties
Scripta Materialia. 2006. Vol. 54, num. 12, p. 2069. DOI : 10.1016/j.scriptamat.2006.03.003.Increasing the strength/toughness combination of high volume fraction particulate metal matrixComposites using an Al-Ag matrix alloy
Advanced Engineering Materials. 2006. Vol. 8, num. 1-2, p. 56. DOI : 10.1002/adem.200500185.Simplified prediction of the monotonic uniaxial stress-strain curve of non-linear particulate composites
Acta Materialia. 2006. Vol. 54, num. 8, p. 2145. DOI : 10.1016/j.actamat.2006.01.002.Conference Papers
Microstructural tailoring of open-pore microcellular aluminium by replication processing
2006. p. 281-288. DOI : 10.4028/www.scientific.net/MSF.512.281.Corrélation entre la forme d’inclusions intergranulaires et l’énergie de joints de grains dans un alliage Cu-1Pb
2006. Matériaux 2006, Dijon, France,Book Chapters
Effective stresses and plastic strain rates in a superalloy: a high temperature in situ study by synchrotron X-Ray TCD
Residual Stresses Vii; 2006. p. 775-780.Posters
Damage and fracture of particle-reinforced metal matrix composite
Junior Euromat, Lausanne, Septembre 4-8, 2006.Talks
Damage and fracture of particle-reinforced metal matrix composites
Junior Euromat, Lausanne, Switzerland, 4-8 September 2006.Corrélation entre la forme d’inclusions intergranulaires et l’énergie de joints de grains dans un alliage Cu-1Pb
Conference “Matériaux 2006”, Dijon, France, November 13-17, 2006.Les laitons au bismuth : une alternative aux laitons au plomb ?
Conference ”Matériaux 2006”, Dijon, France, November 13-17, 2006.2005
Journal Articles
Measuring and tailoring capillary forces during liquid metal infiltration
Current Opinion In Solid State & Materials Science. 2005. Vol. 9, num. 4-5, p. 196-201. DOI : 10.1016/j.cossms.2006.02.007.Wetting in infiltration of alumina particle preforms with molten copper
Journal Of Materials Science. 2005. Vol. 40, num. 9-10, p. 2487-2491. DOI : 10.1007/s10853-005-1980-1.Permeability of open-pore microcellular materials
Acta Materialia. 2005. Vol. 53, num. 5, p. 1381. DOI : 10.1016/j.actamat.2004.11.031.A stereoscopic method for dihedral angle measurement
Journal of Materials Science. 2005. Vol. 40, num. 12, p. 3121. DOI : 10.1007/s10853-005-2673-5.Damage accumulation during cyclic loading of a continuous alumina fibre reinforced aluminium composite
Scripta Materialia. 2005. Vol. 53, num. 10, p. 1111-1115. DOI : 10.1016/j.scriptamat.2005.07.024.Graded open-cell aluminium foam core sandwich beams
Materials Science and Engineering A. 2005. Vol. 404, num. 1-2, p. 9. DOI : 10.1016/j.msea.2005.05.096.Longitudinal deformation of fibre reinforced metals: Influence of fibre distribution on stiffness and flow stress
Mechanics of Materials. 2005. Vol. 37, num. 1-17, p. 1. DOI : 10.1016/j.mechmat.2003.12.001.Damage evolution in Saffil alumina short-fibre reinforced aluminium during tensile testing
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2005. Vol. 395, num. 1-2, p. 27-34. DOI : 10.1016/j.msea.2004.12.009.Non-conducting inclusions in a conducting matrix: Influence of inclusion size on electrical conductivity
Acta Materialia. 2005. Vol. 53, num. 7, p. 1945-1953. DOI : 10.1016/j.actamat.2005.01.004.Ductility of Saffil(TM) short fibre reinforced metals
Scripta Materialia. 2005. Vol. 53, num. 1, p. 17-21. DOI : 10.1016/j.scriptamat.2005.03.027.Conference Papers
Cohesive Zone Modelling of Crack Growth in Particle Reinforced Metal Matrix Composites
2005. p. paper # 4817.In-situ X-ray Tomography Investigation of Replicated Aluminium Foams: Quantitative Analysis of Location Using 3D Strain Mapping
2005. p. 415-418.Replicated microcellular aluminium with spherical pores
2005. p. 207-210.Theses
Replicated aluminium foam
Lausanne, EPFL, 2005.Microstructure and embrittlement of leaded copper alloys
Lausanne, EPFL, 2005.Talks
Diffusion-controlled intergranular penetration of copper by liquid bismuth
Invited seminar, Neuchâtel, Switzerland, March 24, 2005.Patents
Dissipateur thermique constitue d’un materiau composite diamant-cuivre renfermant du bore
JP5275625; KR101161040; US7531020; CN100472765; ES2306131; DE502005004531; AT399368; EP1741137; JP2007535151; CN1957467; US2007042895; KR20070017185; EP1741137; WO2005106952; AT7522.
2005.2004
Journal Articles
Fracture of aluminium reinforced with densely packed ceramic particles: influence of matrix hardening
Acta Materialia. 2004. Vol. 52, num. 18, p. 5331-5345. DOI : 10.1016/j.actamat.2004.07.038.Determination of the matrix in situ flow stress of a continuous fibre reinforced metal matrix composite using instrumented indentation
Materials Science and Engineering A. 2004. Vol. 369, num. 1-2, p. 82. DOI : 10.1016/j.msea.2003.10.288.Tensile behavior of replicated aluminium foams
Advanced Engineering Materials. 2004. Vol. 6, num. 6, p. 444. DOI : 10.1002/adem.200405155.Processing of NaCI powders of controlled size and shape for the microstructural tailoring of aluminium foams
Materials Science and Engineering A. 2004. Vol. 374, num. 1-2, p. 250. DOI : 10.1016/j.msea.2004.03.015.Particle reinforced metals of high ceramic content
Materials Science and Engineering A. 2004. Vol. 387-389, num. 1-2 SPEC. ISS., p. 822. DOI : 10.1016/j.msea.2004.05.054.Investigation of crack-tip plasticity in high volume fraction particulate metal matrix composites
Engineering Fracture Mechanics. 2004. Vol. 71, num. 16-17, p. 2385. DOI : 10.1016/j.engfracmech.2004.01.006.Fracture of aluminium reinforced with densely packed ceramic particles: Link between the local and the total work of fracture
Acta Materialia. 2004. Vol. 52, num. 5, p. 1337-1351. DOI : 10.1016/j.actamat.2003.11.019.Damage evolution of Nextel 610? alumina fibre reinforced aluminium
Acta Materialia. 2004. Vol. 52, num. 3, p. 573. DOI : 10.1016/j.actamat.2003.09.040.Wetting, interfacial interactions and sticking in glass/steel systems
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2004. Vol. 384, num. 1-2, p. 117-128. DOI : 10.1016/j.msea.2004.05.045.Uniaxial deformation of open-cell aluminum foam: The role of internal damage
Acta Materialia. 2004. Vol. 52, num. 10, p. 2895-2902. DOI : 10.1016/j.actamat.2004.02.035.Tensile behaviour and ductility of 10 vol.-% Saffil short fibre reinforced aluminium
Materials Science and Technology. 2004. Vol. 20, num. 12, p. 1645. DOI : 10.1179/026708304225012215.Conference Papers
Caractérisation des Matériaux Cellulaires par Tomographie X: Etude des Liens Structure-propriétés dans les Mousses d’Aluminium à Porosité Ouverte, in Mécanismes et Mécanique des Matériaux et Structures à Longueur Interne: Comportement et Effets d’Echelle
2004. p. 411-414.Structural metallic materials by infiltration
2004. p. 379-390. DOI : 10.1007/1-4020-2112-7_38.Effets d’Echelle dans les Composites et les Mousses Métalliques, in Mécanismes et Mécanique des Matériaux et Structures à Longueur Interne: Comportement et Effets d’Echelle
2004. p. 173-180.2003
Journal Articles
Corrigendum on the tensile behaviour of infiltrated alumina particle reinforced aluminium composites
Acta Materialia. 2003. Vol. 51, num. 20, p. 6493. DOI : 10.1016/S1359-6454(03)00431-2.Geometrically necessary dislocations and strain-gradient plasticity: A few critical issues
Scripta Materialia. 2003. Vol. 48, num. 2, p. 119. DOI : 10.1016/S1359-6462(02)00335-4.Erratum: Influence of heat treatment and particle shape on mechanical properties of infiltrated Al2O3 particle reinforced Al-2 wt-% Cu (Materials Science and Technology, (December 2002) 18 (1461-1470))
Materials Science and Technology. 2003. Vol. 19, num. 4, p. 549-550. DOI : 10.1179/026708303225002956.Transmitted light microscopy of a fibre reinforced metal
Journal of Microscopy. 2003. Vol. 209, num. 1, p. 8-12. DOI : 10.1046/j.1365-2818.2003.01097.x.The influence of non-linear elasticity on the determination of Weibull parameters using the fibre bundle tensile test
Composites Part A: Applied Science and Manufacturing. 2003. Vol. 34, num. 9, p. 907. DOI : 10.1016/S1359-835X(03)00134-9.On the electrical conductivity of metal matrix composites containing high volume fractions of non-conducting inclusions
Acta Materialia. 2003. Vol. 51, num. 11, p. 3199-3211. DOI : 10.1016/S1359-6454(03)00141-1.On the influence of the shape of randomly oriented, nonconducting inclusions in a conducting matrix on the effective electrical conductivity
Acta Materialia. 2003. Vol. 51, num. 2, p. 495-505. DOI : 10.1016/S1359-6454(02)00432-9.Conference Papers
Über den Einfluss von Teilchengrösse und Teilchenform auf die elektrische und thermische Leitfähigkeit von Metall-Matrix-Verbundwerkstoffen
2003. p. 103-108.Books
Metal Matrix Composites in Industry: An Introduction and a Survey
Kluwer Academic, 2003.Theses
Fracture and toughening of high volume fraction ceramic particle reinforced metals
Lausanne, EPFL, 2003.2002
Journal Articles
Determination of the fracture toughness of a low alloy steel by the instrumented Charpy impact test
International Journal of Fracture. 2002. Vol. 115, num. 3, p. 205-226. DOI : 10.1023/A:1016323522441.Structural materials – Or materials with a structural function
L’Actualité Chimique. 2002. num. 3, p. 13-15.The effect of prior deformation on the foaming behavior of ‘FORMGRIP’ precursor material
Advanced Engineering Materials. 2002. Vol. 4, num. 10, p. 749-752. DOI : 10.1002/1527-2648(20021014)4:10<749::AID-ADEM749>3.0.CO;2-E.Size dependent strengthening in particle reinforced aluminium
Acta Materialia. 2002. Vol. 50, num. 1, p. 39-51. DOI : 10.1016/S1359-6454(01)00327-5.Effect of reaction on the tensile behavior of infiltrated boron carbide-aluminum composites
Materials Science and Engineering A. 2002. Vol. 337, num. 1-2, p. 264. DOI : 10.1016/S0921-5093(02)00039-4.Influence of heat treatment and particle shape on mechanical properties of infiltrated Al2O3 particle reinforced Al-2 wt-%Cu
Materials Science and Technology. 2002. Vol. 18, num. 12, p. 1461. DOI : 10.1179/026708302225007754.Quasistatic and dynamic compression of aluminum-oxide particle reinforced pure aluminum
Materials Science and Engineering A. 2002. Vol. 337, num. 1-2, p. 202. DOI : 10.1016/S0921-5093(02)00035-7.Equilibrium solid solubility of silicon in silver
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 2002. Vol. 33, num. 4, p. 1145–1150. DOI : 10.1007/s11661-002-0216-0.Theses
Deformation and fracture of continuous alumina fibre reinforced aluminium composites
Lausanne, EPFL, 2002.Book Chapters
Infiltration and the replication process for producing metal sponges
Handbook of Cellular Materials; Wiley-VCH, 2002. p. 44-56.Chapter 6.5. Metal-Matrix Composites: Challenges and Opportunities
European White Book of Fundamental Research in Materials Science; Max-Planck Institut für Metallforschung, 2002. p. 210-213.2001
Journal Articles
Infiltration processing of fibre reinforced composites: governing phenomena
Composites Part A-Applied Science And Manufacturing. 2001. Vol. 32, num. 8, p. 981-996. DOI : 10.1016/S1359-835X(01)00015-X.Diffusion-limited reactive wetting: Spreading of Cu-Sn-Ti alloys on vitreous carbon
Scripta Materialia. 2001. Vol. 44, num. 11, p. 2543-2549. DOI : 10.1016/S1359-6462(01)00946-0.Thermal fatigue of single-crystalline superalloy CMSX-4: A comparison of epitaxial laser-deposited material with the base single crystal
Materials Science and Engineering A. 2001. Vol. 299, num. 1-2, p. 152. DOI : 10.1016/S0921-5093(00)01378-2.Influence of damage on the tensile behaviour of pure aluminium reinforced with ?40 vol. pct alumina particles
Acta Materialia. 2001. Vol. 49, num. 18, p. 3699. DOI : 10.1016/S1359-6454(01)00279-8.Quantification of microdamage phenomena during tensile straining of high volume fraction particle reinforced aluminum
Acta Materialia. 2001. Vol. 49, num. 3, p. 497-505. DOI : 10.1016/S1359-6454(00)00334-7.Reply to ‘Kinetics of reactive wetting’
Scripta Materialia. 2001. Vol. 45, num. 8, p. 953. DOI : 10.1016/S1359-6462(01)01117-4.Nextel™ 610 alumina fibre reinforced aluminium: Influence of matrix and process on flow stress
Composites – Part A: Applied Science and Manufacturing. 2001. Vol. 32, num. 8, p. 1067-1075. DOI : 10.1016/S1359-835X(00)00178-0.Corrosion resistance of super duplex stainless steels in chloride ion containing environments: Investigations by means of a new microelectrochemical method. I. Precipitation-free states
Corrosion Science. 2001. Vol. 43, num. 4, p. 707-726. DOI : 10.1016/S0010-938X(00)00087-1.Deformation of open-cell aluminum foam
Acta Materialia. 2001. Vol. 49, num. 19, p. 3959. DOI : 10.1016/S1359-6454(01)00294-4.Heating of TEM specimens during ion milling
Ultramicroscopy. 2001. Vol. 87, num. 3, p. 123. DOI : 10.1016/S0304-3991(00)00095-4.Theses
Tensile behaviour of aluminium reinforced with ceramic particles
Lausanne, EPFL, 2001.Book Chapters
Composite Materials: Overview
Encyclopedia of Materials: Science and Technology; Elsevier Science, 2001. p. 1361-1371.2000
Journal Articles
Plasticity in Chevron-notch fracture toughness testing
Engineering Fracture Mechanics. 2000. Vol. 67, num. 3, p. 263. DOI : 10.1016/S0013-7944(00)00061-8.Experimental investigation of stress and strain fields in a ductile matrix surrounding an elastic inclusion
Acta Materialia. 2000. Vol. 48, num. 7, p. 1451. DOI : 10.1016/S1359-6454(99)00444-9.The effect of gravity on solution-reprecipitation during liquid phase sintering
Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science. 2000. Vol. 31, num. 2, p. 397-400. DOI : 10.1007/s11661-000-0276-y.Fracture strength of alumina fiber reinforced aluminum wire with and without a torsional pre-strain
Acta Materialia. 2000. Vol. 48, num. 12, p. 3235. DOI : 10.1016/S1359-6454(00)00112-9.Swift and inverse swift effect in alumina fiber reinforced aluminum wires
Acta Materialia. 2000. Vol. 48, num. 10, p. 2451. DOI : 10.1016/S1359-6454(00)00080-X.Conference Papers
Gas-pressure metal infiltration (invited paper)
2000.Capillary Forces in Liquid Phase Sintered Structures and the Analogy with Wet Liquid Foams and Emulsion
2000. p. 339-344.Fracture toughness determination of high volume fraction particle reinforced aluminium matrix composites
2000. p. 723-728.Semi-solid behaviour of A356 Al alloys at the onset of breakage
2000. p. 175.Damage and Fracture of Infiltrated Particle Reinforced Aluminium Composites
2000.Solidification-processed metal matrix composites for the transportation industries
2000. Cambridge, MA, June 28-30, 2000. p. 475-488.Modelling kinetics of diffusion controlled reactive wetting: the role of reaction behind the triple line
2000. p. 91-98. DOI : 10.4028/www.scientific.net/SSP.72.91.Book Chapters
Melt infiltration of metal matrix composites
Comprehensive Composite Materials; Pergamon, 2000. p. 521-524.1999
Journal Articles
Plasticity of continuous fiber-reinforced metals
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 1999. Vol. 30, num. 7, p. 1843-1866. DOI : 10.1007/s11661-999-0183-9.Equilibrium shape of prismatic dislocation loops under uniform stress
Acta Materialia. 1999. Vol. 47, num. 8, p. 2357. DOI : 10.1016/S1359-6454(99)00118-4.Infiltration of fibrous preforms by a pure metal: Part V. Influence of preform compressibility
Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science. 1999. Vol. 30, num. 2, p. 471-482. DOI : 10.1007/s11661-999-0337-9.Strength and structure of furnace-brazed joints between aluminum and stainless steel
Welding Journal. 1999. Vol. 78, num. 5, p. 151-s–155-s.Diffusion-limited reactive wetting: Study of spreading kinetics of Cu-Cr alloys on carbon substrates
Acta Materialia. 1999. Vol. 47, num. 4, p. 1117. DOI : 10.1016/S1359-6454(99)00008-7.On the use of considere’s criterion in tensile testing of materials which accumulate internal damage
Scripta Materialia. 1999. Vol. 41, num. 5, p. 549. DOI : 10.1016/S1359-6462(99)00159-1.Conference Papers
Mechanical behavior of an alumina fiber reinforced aluminum wire in tension and after axial torsion
1999.Fabrication and compressive response of open-cell aluminum foams with sub-millimeter pores
1999. p. 34.Mechanical behaviour of pressure-infiltrated ceramic particle reinforced aluminum
1999.1998
Journal Articles
Reactive infiltration processing of aluminum-nickel intermetallic compounds
Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science. 1998. Vol. 29, num. 11, p. 2819-2828. DOI : 10.1007/s11661-998-0322-8.On thermal effects in reactive wetting
Scripta Materialia. 1998. Vol. 38, num. 9, p. 1411-1417. DOI : 10.1016/S1359-6462(98)00055-4.On the work hardening of fiber reinforced copper
Scripta Materialia. 1998. Vol. 38, num. 7, p. 1109-1115. DOI : 10.1016/S1359-6462(98)00016-5.Partitioning of chromium and molybdenum in super duplex stainless steels with respect to nitrogen and nickel content
Materials Science and Engineering A. 1998. Vol. 242, num. 1-2, p. 222. DOI : 10.1016/S0921-5093(97)00521-2.Books
Fundamentals of Functionally Graded Materials
The Institut of Materials, 1998.1997
Journal Articles
Thermal expansion responses of pressure infiltrated SiC/Al metal-matrix composites
Journal of Materials Science. 1997. Vol. 32, num. 8, p. 2131. DOI : 10.1023/A:1018535108269.Metallurgical considerations for accelerated testing of soft solder joints
IEEE transactions on components, packaging and manufacturing technology. Part C. Manufacturing. 1997. Vol. 20, num. 3, p. 213-218. DOI : 10.1109/3476.649443.Kinetics of densification by solution-reprecipitation
Acta Materialia. 1997. Vol. 45, num. 2, p. 749-758. DOI : 10.1016/S1359-6454(96)00202-9.Kinetics of diffusion-limited spreading of sessile drops in reactive wetting
Scripta Materialia. 1997. Vol. 36, num. 6, p. 645. DOI : 10.1016/S1359-6462(96)00431-9.Kinetic undercooling in solidification of a hypereutectic Al-Si alloy; Effect of solidifying within a ceramic preform composite
Acta Materialia. 1997. Vol. 46, num. 1, p. 91-99. DOI : 10.1016/S1359-6454(97)00228-0.Functionally graded metals and metal-ceramic composites .2. Thermomechanical behaviour
International Materials Reviews. 1997. Vol. 42, num. 3, p. 85-116. DOI : 10.1179/imr.1997.42.3.85.Conference Papers
Spreading Kinetics of Cu-Cr Alloys on Carbon Substrates
1997. p. 249-260.Capillarity in Infiltration Processing: a Review of Principles and their Extension to Reactive Infiltration
1997. p. 249-260.Lifetime assessment of soft solder joints on the base of the metallurgical behaviour of Sn62Pb36Ag2
1997. p. 256-263. DOI : 10.1109/IEMT.1997.626927.Reactive infiltration processing of bulk and fiber-reinforced NiAl
1997. p. 737-742. DOI : 10.1557/PROC-460-737.1996
Journal Articles
Thermal expansion of metals reinforced with ceramic particles and microcellular foams
Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science. 1996. Vol. 27, num. 11, p. 3700-3717. DOI : 10.1007/BF02595462.Analysis of steady-state shallow cell solidification in metal matrix composites
Acta Materialia. 1996. Vol. 44, num. 11, p. 4553-4564. DOI : 10.1016/1359-6454(96)00081-X.Solidification of binary hypoeutectic alloy matrix composite castings
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 1996. Vol. 27, num. 3, p. 595-609. DOI : 10.1007/BF02648949.Forced unidirectional infiltration of deformable porous media
Journal of Fluid Mechanics. 1996. Vol. 311, num. -1, p. 193. DOI : 10.1017/S002211209600256X.Conference Papers
Metallurgical considerations for accelerated testing of soft solder joints
1996. p. 298-304. DOI : 10.1109/IEMT.1996.559746.1995
Journal Articles
Steady-state cellular solidification of Al-Cu reinforced with alumina fibers
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 1995. Vol. 26 A, num. 8, p. 2141-2153. DOI : 10.1007/BF02670685.Processing Of Microcellular Sic Foams .2. Ceramic Foam Production
Journal Of Materials Science. 1995. Vol. 30, num. 4, p. 1037-1045. DOI : 10.1007/BF01178442.Processing Of Microcellular Sic Foams .1. Curing Kinetics Of Polycarbosilane In Air
Journal Of Materials Science. 1995. Vol. 30, num. 4, p. 1025-1032. DOI : 10.1007/BF01178440.Processing of microcellular SiC foams
Journal of Materials Science. 1995. Vol. 30, num. 4, p. 1025-1032. DOI : 10.1007/BF01178440.Magnetic Phase-Diagram Of Mnsi
Journal Of Magnetism And Magnetic Materials. 1995. Vol. 140, p. 119-120. DOI : 10.1016/0304-8853(94)01115-X.Functionally graded metals and metal-ceramic composites .1. Processing
International Materials Reviews. 1995. Vol. 40, num. 6, p. 239-265. DOI : 10.1179/imr.1995.40.6.239.Conference Papers
Properties of thin layers of Sn62Pb36Ag2
1995. p. 502-507. DOI : 10.1109/IEMT.1995.526211.1994
Journal Articles
Microsegregation In Cellular Solidification
Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science. 1994. Vol. 25, num. 10, p. 2295-2301. DOI : 10.1007/BF02652329.Capillarity in isothermal infiltration of alumina fiber preforms with aluminum
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 1994. Vol. 25 A, num. 10, p. 2145–2152. DOI : 10.1007/BF02652315.Initial-Stage Hot-Pressing Of Sic Fibre/Ti Monotapes
Composites. 1994. Vol. 25, num. 10, p. 953-956. DOI : 10.1016/0010-4361(94)90111-2.Calorimetry of deformed aluminum reinforced with alumina particles
Scripta metallurgica et materialia. 1994. Vol. 30, num. 12, p. 1509. DOI : 10.1016/0956-716X(94)90299-2.Book Chapters
Composites Materials
Worldbook Encyclopedia; World Book Inc., 1994.Materials
Worldbook Encyclopedia; World Book Inc., 1994.Metal Matrix Composites: Composites Systems
Encyclopaedia of Advanced Materials; Pergamon Press, 1994. p. 1497-1502.Metal Matrix Composites: Overview
Encyclopaedia of Advanced Materials; Pergamon Press, 1994. p. 1493-1497.1993
Journal Articles
Synthesis Of Bulk And Reinforced Nickel Aluminides By Reactive Infiltration
Metallurgical Transactions A-Physical Metallurgy And Materials Science. 1993. Vol. 24, num. 10, p. 2161-2170. DOI : 10.1007/BF02648590.Steady-State Solidification Of Reinforced Binary-Alloys
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 1993. Vol. 173, num. 1-2, p. 205-212. DOI : 10.1016/0921-5093(93)90217-3.Status of metal-matrix composite research and development in Japan
JOM. 1993. Vol. 45, num. 3, p. 10-18. DOI : 10.1007/BF03222342.Pressure-Infiltration Processing Of Reinforced Aluminum
Jom-Journal Of The Minerals Metals & Materials Society. 1993. Vol. 45, num. 1, p. 36-43. DOI : 10.1007/BF03223364.Researching Metal-Matrix Composites At Mits Department Of Materials Science And Engineering
Jom-Journal Of The Minerals Metals & Materials Society. 1993. Vol. 45, num. 1, p. 62-63. DOI : 10.1007/BF03223371.Initial-Stage Hot-Pressing Of Monosized Ti And 90-Percent Ti-10-Percent Tic Powders
Acta Metallurgica Et Materialia. 1993. Vol. 41, num. 3, p. 955-965. DOI : 10.1016/0956-7151(93)90030-V.Book Chapters
Chapter 3: Capillary Phenomena, Interfacial Bonding and Reactivity
Fundamentals of Metal Matrix Composites; Butterworths, 1993. p. 42-58.Plane Front Stability and Cellular Solidification in Fiber Reinforced Aluminium-Copper Alloyx
Microstructure Formation during Solidification of Cast Composites; TMS, 1993. p. 83-86.1992
Journal Articles
Infiltration of fibrous preforms by a pure metal: Part IV. Morphological stability of the remelting front
Metallurgical Transactions A-Physical Metallurgy And Materials Science. 1992. Vol. 23, num. 8, p. 2291-2299. DOI : 10.1007/BF02646022.Structure And Room-Temperature Deformation Of Alumina Fiber-Reinforced Aluminum
Metallurgical Transactions A-Physical Metallurgy And Materials Science. 1992. Vol. 23, num. 4, p. 1207-1219. DOI : 10.1007/BF02665052.Infiltration of fiber preforms by an alloy: Part III. Die casting experiments
Metallurgical transactions. A, Physical metallurgy and materials science. 1992. Vol. 23, num. 8, p. 2281-2289. DOI : 10.1007/BF02646021.Wetting of SAFFIL alumina fiber preforms by aluminum at 973 K
Metallurgical transactions. A, Physical metallurgy and materials science. 1992. Vol. 23, num. 7, p. 2071-2073. DOI : 10.1007/BF02647554.Infiltration of fiber preforms by a binary alloy: Part II. Further theory and experiments
Metallurgical transactions. A, Physical metallurgy and materials science. 1992. Vol. 23, num. 8, p. 2263–2280. DOI : 10.1007/BF02646020.Solidification Processing Of Metal Matrix Composites
International Materials Reviews. 1992. Vol. 37, num. 3, p. 101-128. DOI : 10.1179/imr.1992.37.1.101.1991
Journal Articles
Lorentz Force Infiltration Of Fibrous Preforms
Metallurgical Transactions A-Physical Metallurgy And Materials Science. 1991. Vol. 22, num. 12, p. 2903-2915. DOI : 10.1007/BF02650251.Lorentz-Force-Driven Infiltration By Aluminum
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 1991. Vol. 144, p. 165-168. DOI : 10.1016/0921-5093(91)90222-9.Particle Matrix Bonding In Alumina-Steel Composites
Scripta Metallurgica Et Materialia. 1991. Vol. 25, num. 8, p. 1917-1920. DOI : 10.1016/0956-716X(91)90328-X.Thermal mismatch dislocations produced by large particles in a strain-hardening matrix
Materials Science and Engineering A. 1991. Vol. A135, num. 1-2, p. 179. DOI : 10.1016/0921-5093(91)90557-4.Reinforced silver chloride as a model material for the study of dislocations in metal matrix composites
Materials Science and Engineering A. 1991. Vol. A144, num. 1-2, p. 179. DOI : 10.1016/0921-5093(91)90224-B.Dislocation emission at fibers. II. Experiments and microstructure of thermal punching
Acta metallurgica et materialia. 1991. Vol. 39, num. 7, p. 1417-1429. DOI : 10.1016/0956-7151(91)90227-R.Dislocation emission at fibers. I. Theory of longitudinal punching by thermal stresses
Acta metallurgica et materialia. 1991. Vol. 39, num. 7, p. 1405-1416. DOI : 10.1016/0956-7151(91)90226-Q.On the relaxation of a mismatching spheroid by prismatic loop punching
Scripta metallurgica et materialia. 1991. Vol. 25, num. 4, p. 761.Relaxed configuration of a row of punched prismatic dislocation loops
Scripta metallurgica et materialia. 1991. Vol. 25, num. 3, p. 607.On plastic relaxation of thermal stresses in reinforced metals
Acta metallurgica et materialia. 1991. Vol. 39, num. 2, p. 127-139. DOI : 10.1016/0956-7151(91)90261-X.Chemical stability of zirconia-stabilized alumina fibers during pressure infiltration by aluminum
Metallurgical transactions. A, Physical metallurgy and materials science. 1991. Vol. 22, num. 12, p. 2855–2862. DOI : 10.1007/BF02650246.Fabrication Of Cast Particle-Reinforced Metals Via Pressure Infiltration
Journal Of Materials Science. 1991. Vol. 26, num. 9, p. 2519-2526. DOI : 10.1007/BF01130205.Interface structure in infiltrated composites of aluminum reinforced with alumina-silica fiber preforms
Metallurgical transactions. A, Physical metallurgy and materials science. 1991. Vol. 22, num. 5, p. 1126-1128. DOI : 10.1007/BF02661109.Correction
Metallurgical Transactions A-Physical Metallurgy And Materials Science. 1991. Vol. 22, num. 6, p. 1466-1466. DOI : 10.1007/BF02660679.Interfacial phenomena in the solidification processing of metal matrix composites
Materials Science and Engineering A. 1991. Vol. A135, num. 1-2, p. 1. DOI : 10.1016/0921-5093(91)90527-T.On the rate of dendrite arm coarsening
Metallurgical transactions. A, Physical metallurgy and materials science. 1991. Vol. 22, num. 2, p. 569-574. DOI : 10.1007/BF02656824.1990
Journal Articles
Corrigenda And Comments On The Infiltration Of Fiber Preforms
Metallurgical Transactions A-Physical Metallurgy And Materials Science. 1990. Vol. 21, num. 8, p. 2287-2287. DOI : 10.1007/BF02647893.Infiltration of fiber preforms by a binary alloy: Part I. Theory
Metallurgical transactions. A, Physical metallurgy and materials science. 1990. Vol. 21, num. 7, p. 2059-2072. DOI : 10.1007/BF02647253.Infiltration of fibrous preforms by a pure metal: part III. Capillary phenomena
Metallurgical transactions. A, Physical metallurgy and materials science. 1990. Vol. 21, num. 8, p. 2257-2263. DOI : 10.1007/BF02647888.Conference Papers
Strengthening Mechanisms In Tungsten Powder Reinforced Uranium
1990. Symposium of the TMS Composite, Structural Materials and Flow and Fracture Committees, TMS Fall Meeting, Indianapolis, Indiana, October 1-5, 1989. p. 761-778.Book Chapters
Metal Matrix Composites, Infiltration
Encyclopaedia of Composites; VCH Publishers, 1990. p. 259-265.1989
Journal Articles
Infiltration of fibrous preforms by a pure metal. Part II. Experiment
Metallurgical transactions. A, Physical metallurgy and materials science. 1989. Vol. 20, num. 11, p. 2549-2557. DOI : 10.1007/BF02666689.On the influence of coarsening on microsegregation
Metallurgical transactions. A, Physical metallurgy and materials science. 1989. Vol. 20, num. 2, p. 247-253. DOI : 10.1007/BF02670250.Solidification processing of metal-matrix composites
Materials and Design. 1989. Vol. 10, num. 2, p. 68.Infiltration of fibrous preforms by a pure metal. Part I. Theory
Metallurgical transactions. A, Physical metallurgy and materials science. 1989. Vol. 20, num. 11, p. 2535–2547. DOI : 10.1007/BF02666688.Patents
Solid Composite Material Particularly with Ceramic Dispersates
CA1338006; US5477905; DE68918990; DE68918990; AT113317; EP0346771; NO174007; NO174007; AU616275; KR910001078; JPH02111827; ZA8904608; BR8902947; JPH0225530; AU3648789; EP0346771; DK297289; NO892404; DK297289; NO892404.
1989.1988
Journal Articles
Fundamental aspects of solidification processing of metal matrix composites by pressure infiltration techniques
Israel Journal of Technology. 1988. Vol. 24, num. 3 -4,Pt B, p. 359.Columnar Dendritic Solidification In A Metal-Matrix Composite
Metallurgical Transactions A-Physical Metallurgy And Materials Science. 1988. Vol. 19, num. 3, p. 709-721. DOI : 10.1007/BF02649285.Solidification Processing of Metal-Matrix Composites
Journal of Metals. 1988. Vol. 40, num. 2, p. 12-19. DOI : 10.1007/BF03258826.Conference Papers
Interface chemistry of inorganic composite materials
1988. p. 141.1987
Journal Articles
On the infiltration of metal matrix composites
Metallurgical transactions. A, Physical metallurgy and materials science. 1987. Vol. 18, num. 6, p. 1160-1163. DOI : 10.1007/BF02668570.1986
Journal Articles
PROCESSING OF METAL AND CERAMIC MATRIX COMPOSITE
American Ceramic Society Bulletin. 1986. Vol. 65, num. 2, p. 293.1985
Conference Papers
The Solidification Process during Pressure Casting of SiC Al2O3 Reinforced Al-4.5wt%Cu Metal Matrix Composites
1985. p. 802-823.SOLIDIFICATION PROCESS DURING PRESSURE CASTING SiC AND Al//2O//3 REINFORCED Al-4. 5%Cu METAL MATRIX COMPOSITES
1985. p. 809-823.1984
Reports
Rapid Solidification of Magnesium Alloys
1984
1983
Reports
Rapid Solidification of Magnesium Alloys
1983