Effects of beam shaping on copper-steel interfaces in multi-material laser beam powder bed fusion

C. P. Martendal; P. D. B. Esteves; L. Deillon; F. Malamud; A. M. Jamili et al. 

Hard-sphere model of the B2 → B19′ phase transformation, and its application to predict the B19′ structure in NiTi alloys and the B19 structures in other binary alloys

C. Cayron 

Experimental quantification of inward Marangoni convection and its impact on keyhole threshold in laser powder bed fusion of stainless steel

J. Yang; L. M. Schlenger; M. H. Nasab; S. Van Petegem; F. Marone et al. 

Quantitative prediction of crystallization in laser powder bed fusion of a Zr-based bulk metallic glass with high oxygen content

N. Sohrabi; T. Ivas; J. Jhabvala; J. E. K. Schawe; J. F. Loffler et al. 

Monitoring of laser-induced fast recrystallization in SS-316L through synchrotron X-ray diffraction

C. Navarre; S. Van Petegem; L. M. Schlenger; C. Cayron; M. Hamidi-Nasab et al. 

Site-specifically tailored microstructures with enhanced strength and hardening through laser powder bed fusion

C. Sofras; J. Capek; X. Li; C. C. Roth; C. Leinenbach et al. 

Harmonizing sound and light: X-ray imaging unveils acoustic signatures of stochastic inter-regime instabilities during laser melting

M. Hamidi Nasab; G. Masinelli; C. de Formanoir; L. M. Schlenger; S. Van Petegem et al. 

Healing of keyhole porosity by means of defocused laser beam remelting: Operando observation by X-ray imaging and acoustic emission-based detection

C. de Formanoir; M. H. Nasab; L. M. Schlenger; S. Van Petegem; G. Masinelli et al. 

EBSD study of variant reorientation, texture, and twin formation in a martensitic NiTi alloy deformed in compression

J. F. Xiao; C. Cayron; M. van der Meer; R. E. Loge 

In-situ selective laser heat treatment for microstructural control of additively manufactured Ti-6Al-4V

R. Esmaeilzadeh; M. Hamidi-Nasab; C. de Formanoir; L. M. Schlenger; S. Van Petegem et al. 

Corrosion behavior and tribological-microstructural characterization of Al/ZrO2-Gr hybrid composite fabricated via Friction Stir Processing

H. Keshavarz; S. E. Moosavi; H. Eslamian; A. Kokabi 

Superplastic behavior of a fine-grained Mg-Gd-Y-Ag alloy processed by equal channel angular pressing

A. Rezaei; R. Mahmudi; R. E. Loge 

Simultaneous strength and ductility enhancement of wire-arc directed energy deposited Al-Cu alloy by interlayer laser shock peening

Y. Jing; X. Fang; Y. Geng; Y. Duan; K. Huang 

Simple shear extrusion versus equal channel angular pressing: A comparative study on the microstructure and mechanical properties of an Mg alloy

A. Rezaei Rad; R. Mahmudi; C. Cayron; R. Logé 

Wear behaviour of novel copper alloy as an alternative to copper-beryllium

B. Rouxel; S. Mischler; R. Loge; A. I. Munoz 

An investigation on the fatigue behavior of additively manufactured laser shock peened AlSi7Mg alloy surfaces

M. H. Nasab; M. Vedani; R. E. Loge; N. Sohrabi; A. M. Jamili et al. 

Interplay between dislocation glide and omega precipitation in a Ti-15Mo alloy investigated by TEM

J. F. Xiao; Z. H. Nie; B. B. He; C. W. Tan 

Acoustic emission for the prediction of processing regimes in Laser Powder Bed Fusion, and the generation of processing maps

R. Drissi-Daoudi; G. Masinelli; C. de Formanoir; K. Wasmer; J. Jhabvala et al. 

Temperature dependent critical stress for {1012} twinning in magnesium micropillars at cryogenic temperatures

N. M. della Ventura; C. Tian; A. Sharma; T. E. J. Edwards; J. J. Schwiedrzik et al. 

Compressive properties of a severely deformed fine-grained Mg-6Gd-3Y alloy

A. Rezaei; R. Mahmudi; R. E. Loge 

Laser powder-bed fusion of a high entropy alloy with outstanding intrinsic mechanical properties

N. Sohrabi; R. Ran; P. A. Duro; C. Cayron; J. Jhabvala et al. 

Response of magnesium microcrystals to c-axis compression and contraction loadings at low and high strain rates

N. M. della Ventura; A. Sharma; C. Cayron; S. Kalacska; T. E. J. Edwards et al. 

Stability of untransformed ferrite in 10Cr ODS steel

A. Durand; D. Sornin; O. Tache; T. Guilbert; F. Brisset et al. 

Deformation mechanisms of primary ?? precipitates in nickel-based superalloy

H. Zhang; H. Ma; T. Chang; Y. Zhang; R. E. Loge et al. 

Micromechanical response of pure magnesium at different strain rate and temperature conditions: twin to slip and slip to twin transitions

N. M. della Ventura; P. Schweizer; A. Sharma; M. Jain; T. E. J. Edwards et al. 

A hybrid Selective Laser Sintering based process for the additive manufacturing of architectured composites

Towards Robust Monitoring of the Laser Powder Bed Fusion Process based on Acoustic Emission combined with Machine Learning Solutions

An investigation on reorientation and textural evolution in a martensitic NiTi rolled sheet using EBSD

J. F. Xiao; C. Cayron; R. E. Loge 

Neutron Bragg edge imaging for strain characterization in powder bed additive manufacturing environments

S. Sumarli; E. Polatidis; F. Malamud; M. Busi; C. Navarre et al. 

The concept of axial weak twins

C. Cayron 

Thermal Modelling and Experimental Validation in the Perspective of Tool Steel Laser Polishing

B. Meylan; A. Masserey; E. Boillat; I. Calderon; K. Wasmer 

Effect of chromium content on microstructural evolution of CoNiAlW superalloy

A. F. Sheykhlari; H. Arabi; S. M. A. Boutorabi; C. Cayron 

Nanotwinning-assisted recrystallization

R. E. Loge 

Tailored deformation behavior of 304L stainless steel through control of the crystallographic texture with laser-powder bed fusion

C. Sofras; J. Capek; A. Arabi-Hashemi; C. Leinenbach; M. Frost et al. 

Bragg edge tomography characterization of additively manufactured 316L steel

M. Busi; E. Polatidis; F. Malamud; W. Kockelmann; M. Morgano et al. 

Evolution of deformation twinning mechanisms in magnesium from low to high strain rates

N. M. della Ventura; A. Sharma; S. Kalacska; M. Jain; T. E. J. Edwards et al. 

Hot rocks: Constraining the thermal conditions of the Mistastin Lake impact melt deposits using zircon grain microstructures

G. D. Tolometti; T. M. Erickson; G. R. Osinski; C. Cayron; C. D. Neish 

Persistence of variant selection in red gold alloys

M. N. D. Larcher; C. Cayron; A. Blatter; R. Soulignac; R. E. Loge 

Understanding variant selection and texture in additively manufactured red-gold alloys

H. Ghasemi-Tabasi; M. D. Larcher; C. Cayron; J. Jhabvala; S. Van Petegem et al. 

A new method for lattice reduction using directional and hyperplanar shearing

C. Cayron 

Micro-addition of Fe in highly alloyed Cu-Ti alloys to improve both formability and strength

B. Rouxel; C. Cayron; J. Bornand; P. Sanders; R. E. Loge 

Deformation twinning mechanism in magnesium at the microscale: strain rate, temperature and orientation effects

Design, prototyping, and thermo-mechanical modelling of a neutron spallation target impacted by high-energy proton-beam pulses in the n_TOF facility at CERN

Tensile and Impact Toughness Properties of a Zr-Based Bulk Metallic Glass Fabricated via Laser Powder-Bed Fusion

N. Sohrabi; A. Parrilli; J. Jhabvala; A. Neels; R. E. Loge 

Design of the third-generation lead-based neutron spallation target for the neutron time-of-flight facility at CERN

R. Esposito; M. Calviani; O. Aberle; M. Barbagallo; D. Cano-Ott et al. 

A fast algorithm to find reduced hyperplane unit cells and solve N-dimensional Bezout’s identities

C. Cayron 

Microstructural Evolution Study of Fe-Mn-Al-C Steels Through Variable Thermomechanical Treatments

J. F. Duran; G. A. Perez; J. S. Rodriguez; Y. Aguilar; R. E. Loge et al. 

Influence of Joule Effect Heating on Recrystallization Phenomena in Inconel 718

A. Nicolay; J. M. Franchet; J. Cormier; R. E. Loge; G. Fiorucci et al. 

A parametric neutron Bragg edge imaging study of additively manufactured samples treated by laser shock peening

M. Busi; N. Kalentics; M. Morgano; S. Griffiths; A. S. Tremsin et al. 

Fatigue Performance of an Additively Manufactured Zr-Based Bulk Metallic Glass and the Effect of Post-Processing

N. Sohrabi; M. Hamidi-Nasab; B. Rouxel; J. Jhabvala; A. Parrilli et al. 

Additive manufacturing of a precious bulk metallic glass

N. Sohrabi; J. Jhabvala; G. Kurtuldu; R. Frison; A. Parrilli et al. 

Characterization of untransformed ferrite in 10Cr and 12Cr ODS steels

A. Durand; D. Sornin; Y. de Carlan; G. Spartacus; F. Brisset et al. 

Critical crystallization properties of an industrial-grade Zr-based metallic glass used in additive manufacturing

N. Sohrabi; J. E. Schawe; J. Jhabvala; J. F. Löffler; R. Logé 

Microstructural evolution and superplastic behavior of a fine-grained Mg-Gd-Y-Ag alloy processed by simple shear extrusion

A. Rezaei; R. Mahmudi; C. Cayron; R. Loge 

Coupled segregation mechanisms of Sc, Zr and Mn at theta ‘ interfaces enhances the strength and thermal stability of Al-Cu alloys

L. Jiang; B. Rouxel; T. Langan; T. Dorin 

Nondestructive characterization of laser powder bed fusion parts with neutron Bragg edge imaging

M. Busi; N. Kalentics; M. Morgano; S. Griffiths; A. S. Tremsin et al. 

Mapping Spatial Distribution of Pores in an Additively Manufactured Gold Alloy Using Neutron Microtomography

H. Ghasemi Tabasi; P. Trtik; J. Jhabvala; M. Meyer; C. Carminati et al. 

Superplastic behavior of a severely deformed Mg-6Gd-3Y-0.5Ag alloy

A. Rezaei; R. Mahmudi; C. Cayron; R. E. Loge 

Influence of Hf on the heat treatment response of additively manufactured Ni-base superalloy CM247LC

S. Griffiths; H. Ghasemi-Tabasi; A. De Luca; J. Pado; S. S. Joglekar et al. 

{10(1)over-bar2} twinning mechanism during in situ micro-tensile loading of pure Mg: Role of basal slip and twin-twin interactions

N. M. Della Ventura; S. Kalacska; D. Casari; T. E. J. Edwards; A. Sharma et al. 

Additive Manufacturing of Bulk Metallic Glasses-Process, Challenges and Properties: A Review

N. Sohrabi; J. Jhabvala; R. E. Loge 

Phase transformation induced distortions in red gold alloys

Laser powder-bed fusion of metallic alloys with enhanced microstructures and properties

Understanding Thermomechanical Treatments Induced by Laser Powder Bed Fusion Process

Laser treatment systems and methods for in-situ laser shock peening (lsp) treatment of parts during production thereof by a selective laser sintering or melting (sls/slm) process, and additive manufacturing systems and methods implementing the same

N. Kalentics; R. Logé 

Characterization, mechanical properties and dimensional accuracy of a Zr-based bulk metallic glass manufactured via laser powder-bed fusion

N. Sohrabi; J. Jhabvala; G. Kurtuldu; M. Stoica; A. Parrilli et al. 

Combining alloy and process modification for micro-crack mitigation in an additively manufactured Ni-base superalloy

S. Griffiths; H. G. Tabasi; T. Ivas; X. Maeder; A. De Luca et al. 

Diffraction artefacts from twins and stacking faults, and the mirage of hexagonal, polytypes or other superstructures

C. Cayron 

Solute-dislocation interactions and creep-enhanced Cu precipitation in a novel ferritic-martensitic steel

B. Xiao; L. Xu; C. Cayron; J. Xue; G. Sha et al. 

Effect of Ag Addition on the Hot Deformation, Constitutive Equations and Processing Maps of a Hot Extruded Mg-Gd-Y Alloy

A. Rezaei; R. Mahmudi; R. Loge 

An effective rule for translating optimal selective laser melting processing parameters from one material to another

H. Ghasemi Tabasi; J. Jhabvala; E. Boillat; T. Ivas; R. Drissi Daoudi et al. 

Investigation of the effect of Laser Shock Peening in Additively Manufactured samples through Bragg Edge Neutron Imaging

M. Morgano; N. Kalentics; C. Carminati; J. Capek; M. Makowska et al. 

The thermally activated distortion with amplification effect and related variant selection in red gold alloys

M. Larcher; C. Cayron; A. Blatter; R. Soulignac; R. Logé 

A critical assessment of experimental investigation of dynamic recrystallization of metallic materials

H. K. Zhang; H. Xiao; X. W. Fang; Q. Zhang; R. E. Loge et al. 

Laser coating of a Zr-based metallic glass on an aluminum substrate

N. Sohrabi; R. S. Panikar; J. Jhabvala; A. Roda Buch; S. Mischler et al. 

What EBSD and TKD Tell Us about the Crystallography of the Martensitic B2-B19′ Transformation in NiTi Shape Memory Alloys

C. Cayron 

Probabilistic and deterministic full field approaches to simulate recrystallization in ODS steels

F. Villaret; B. Hary; Y. de Carlan; T. Baudin; R. Loge et al. 

Enhanced strength and toughness of bulk ultrafine grained Cu by nacre-inspired lamellar structure

C. Li; Y. Xie; M. Zhang; M. Ruan; J. Wang et al. 

3D laser shock peening – A new method for improving fatigue properties of selective laser melted parts

N. Kalentics; M. O. V. de Seijas; S. Griffiths; C. Leinenbach; R. E. Loge 

van der Waals Epitaxy of Earth-Abundant Zn3P2 on Graphene for Photovoltaics

R. Paul; N. Humblot; S. E. Steinvall; E. Z. Stutz; S. S. Joglekar et al. 

Annealing hardening and softening of an ultrafine grained Cu-4.5vol.% Al2O3 nanocomposite

C. Li; W. Zeng; Y. Xie; J. Wang; J. Liang et al. 

Effect of dislocations, Al-3(Sc,Zr) distribution and ageing temperature on theta ‘ precipitation in Al-Cu-(Sc)-(Zr) alloys

B. Rouxel; M. Ramajayam; T. J. Langan; J. Lamb; P. G. Sanders et al. 

Complements to Mugge and Friedel’s Theory of Twinning

C. Cayron 

Evidence of extensive lunar crust formation in impact melt sheets 4,330 Myr ago

L. F. White; A. Černok; J. R. Darling; M. J. Whitehouse; K. H. Joy et al. 

Design of the third-generation neutron spallation target for the CERN’s n_TOF facility

R. Esposito; M. Calviani 

Healing cracks in selective laser melting by 3D laser shock peening

N. Kalentics; N. Sohrabi; H. G. Tabasi; S. Griffiths; J. Jhabvala et al. 

Electron backscatter diffraction study of variant selection during ordering phase transformation in L1(0)-type red gold alloy

M. N. D. Larcher; C. Cayron; A. Blatter; R. Soulignac; R. E. Loge 

The transformation matrices (distortion, orientation, correspondence), their continuous forms and their variants (vol A75, pg 411, 2019)

C. Cayron 

On the chevron morphology of surface martensite

A. P. Baur; C. Cayron; R. E. Loge 

Effect of powder characteristics and oxygen content on modifications to the microstructural topology during hot isostatic pressing of an austenitic steel

S. Irukuvarghula; H. Hassanin; C. Cayron; M. Aristizabal; M. M. Attallah et al. 

Shock-produced high-pressure (La, Ce, Th)PO4 polymorph revealed by microstructural phase heritage of monazite

T. M. Erickson; N. E. Timms; M. A. Pearce; C. Cayron; A. Deutsch et al. 

Dynamic recrystallization study of a Fe-Mn-Si based shape memory alloy in constant and variable thermomechanical conditions

O. A. Zarnbrano; R. E. Loge 

Experimental and theoretical investigation of crystallography and variant selection during massive transformation in Zr alloy

J. M. Wang; B. F. Luan; R. L. Xin; Q. F. Xing; K. L. Murty et al. 

Microstructure and Mechanical Properties of a Multiphase FeCrCuMnNi High-Entropy Alloy

A. Shabani; M. R. Toroghinejad; A. Shafyei; R. E. Loge 

3D laser shock peening as a way to improve geometrical accuracy in selective laser melting

N. Kalentics; A. Burn; M. Cloots; R. E. Loge 

Laser shock peening: A promising tool for tailoring metallic microstructures in selective laser melting

N. Kalentics; K. Huang; M. Ortega Varela De Seijas; A. Burn; V. Romano et al. 

Microstructures and Properties of Martensitic Materials

C. Cayron 

Surface tension and viscosity of liquid Pd43Cu27Ni10P20 measured in a levitation device under microgravity

M. Mohr; R. K. Wunderlich; K. Zweiacker; S. Prades-Rodel; R. Sauget et al. 

Effect of cooling conditions on microstructures and mechanical behaviors of reheated low-carbon weld metals

G. Mao; R. Cao; C. Cayron; X. Mao; R. Loge et al. 

Evaluation of the mechanical properties of the heat treated FeCrCuMnNi high entropy alloy

A. Shabani; M. R. Toroghinejad; A. Shafyei; R. E. Logé 

Variant selection in martensitic steels

Morphological and Crystallographic Characteristics of alpha Structure in a Low-Carbon Iron-Nickel Alloy

G. Mao; C. Cayron; X. Mao; R. Cao; R. Loge et al. 

Variant Selection in Fe-20Ni-1.8C under Bending

A. P. Baur; C. Cayron; R. E. Loge 

Strain-induced dissolution of Y-Ti-O nano-oxides in a consolidated ferritic oxide dispersion strengthened (ODS) steel

B. Hary; R. Logé; J. Ribis; -H. Mathon; M. Van Der Meer et al. 

Shifting the Shear Paradigm in the Crystallographic Models of Displacive Transformations in Metals and Alloys

C. Cayron 

Microstructure and flow stress evolution during hot deformation of 304L austenitic stainless steel in variable thermomechanical conditions

K. Huang; R. Logé 

A one-step mechanism for new twinning modes in magnesium and titanium alloys modelled by the obliquity correction of a (58 degrees, a+2b) prototype stretch twin

C. Cayron 

The relationship between low-temperature toughness and secondary crack in low-carbon bainitic weld metals

G. Mao; C. Cayron; R. Cao; R. Logé; J. Chen 

The role of nanocrystalline binder metallic coating into WC after additive manufacturing

A. J. Cavaleiro; C. M. Fernandes; A. R. Farinha; C. V. Gestel; J. Jhabvala et al. 

Microstructural evolution and mechanical property development with nickel addition in low-carbon weld butt joints

G. Mao; R. Cao; C. Cayron; R. Logé; X. Guo et al. 

Intricate morphologies of laths and blocks in low-carbon martensitic steels

C. Cayron; A. Baur; R. Loge 

Mechanical behavior and texture development of over-aged and solution treated Al-Cu-Mg alloy during multi-directional forging

S. Moghanaki; M. Kazeminezhad; R. Loge 

Non-isothermal aging of a high-Zn-containing Al-Zn-Mg-Cu alloy: microstructure and mechanical properties

S. Kervee; P. Pourshayan; F. Nasrollahnezhad; S. Moghanaki; M. Kazeminezhad et al. 

Experimental and modelling study of an approach to enhance gas bulging formability of TA15 titanium alloy tube based on dynamic recrystallization

K. Wang; G. Liu; J. Zhao; K. Huang; L. Wang 

Evidence of new twinning modes in magnesium questioning the shear paradigm

C. Cayron; R. Loge 

Baddeleyite as a widespread and sensitive indicator of meteorite bombardment in planetary crusts

L. White; J. Darling; D. Moser; C. Cayron; I. Barker et al. 

Correlating oriented grain number density of recrystallisation in particle-containing aluminium alloys

Q. Zhao; H. Zhang; K. Huang; K. Marthinsen 

On the benefits of a stress criterion for the simulation of cup drawing process

Y. Jansen; R. E. Loge; P-Y. Manach; G. Carbuccia; M. Milesi 

The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials

K. Huang; K. Marthinsen; Q. Zhao; R. Logé 

Study on Bainite/Martensite Transformation in Reheated Weld Metals

G. Mao; C. Cayron; R. Cao; R. Loge; J. Chen 

A new hybrid Additive Manufacturing process combining Selective Laser Melting and Laser Shock Peening

Controlling grain structure and texture in Al-Mn from the competition between precipitation and recrystallization

K. Huang; K. Zhang; K. Marthinsen; R. Logé 

Competition between intragranular and intergranular deformation mechanisms in ODS ferritic steels during hot deformation at high strain rate

D. L. Sornin; A. Karch; R. E. Logé 

Effect of recrystallization on hot deformation mechanism of TA15 titanium alloy under uniaxial tension and biaxial gas bulging conditions

K. Wang; G. Liu; K. Huang; D. J. Politis; L. Wang 

Hard-sphere displacive model of deformation twinning in hexagonal close-packed metals. Revisiting the case of the (56, a) contraction twins in magnesium

C. Cayron 

Study on the mixed dynamic recrystallization mechanism during the globularization process of laser-welded TA15 Ti-alloy joint under hot tensile deformation

K. Wang; G. Liu; W. Tao; J. Zhao; K. Huang 

Evolution of grain boundary network topology in 316L austenitic stainless steel during powder hot isostatic pressing

S. Irukuvarghula; H. Hassanin; C. Cayron; M. Attallah; D. Stewart et al. 

Cubic zirconia in >2370◦C impact melt records Earth’s hottest crust

N. E. Timms; T. M. Erickson; M. R. Zanetti; M. A. Pearce; C. Cayron et al. 

The surprising influence of continuous alternating electric current on recrystallization behaviour of a cold-rolled Aluminium alloy

K. Huang; C. Cayron; R. E. Logé 

The flow stress evolution and grain refinement mechanisms during hot deformation of Al-Mg alloy

K. Huang; R. E. Logé 

Accounting for material parameters scattering in rolled zinc formability

M. Milesi; R. E. Loge; D. P. Munoz; Y. Jansen; P. -O. Bouchard 

Hot deformation of a Fe-Mn-Al-C steel susceptible of κ-carbide precipitation

O. Zambrano; J. Valdés; Y. Aguilar; S. Coronado; S. Rodriguez et al. 

{225} habit planes in martensitic steels: from the PTMC to a continuous model

A. P. Baur; C. Cayron; R. Logé 

Tailoring residual stress profile of Selective Laser Melted parts byLaser Shock Peening

N. Kalentics; E. Boillat; P. Peyre; S. Ciric-Kostic; N. Bogojevic et al. 

Hard-sphere displacive model of extension twinning in magnesium

C. Cayron 

Heating rate effect on particle stimulated nucleation and grains structure during non-isothermal annealing of multi-directionally forged solution treated AA2024

S. Khani Moghanaki; M. Kazeminezhad; R. Logé 

Variant selection in surface martensite

A. Baur; C. Cayron; R. Logé 

Recrystallization behavior of multi-directionally forged over-aged and solution treated Al-Cu-Mg alloy during non-isothermal annealing

S. K. Moghanaki; M. Kazeminezhad; R. Logé 

3D Laser Shock Peening – A new method for the 3D control of residual stresses in Selective Laser Melting

N. Kalentics; E. Boillat; P. Peyre; C. Gorny; C. Kenel et al. 

Numerical simulation of mechanical deformation of semi-solid material using a level-set based finite element method

Z. Sun; M. Bernacki; R. Logé; G. Gu 

In Situ Characterization of Inconel 718 Post-Dynamic Recrystallization within a Scanning Electron Microscope

M. Zouari; R. Logé; N. Bozzolo 

Effect of concurrent precipitation on the texture evolution during continuous heating of multi directionally forged solution treated Al-Cu-Mg alloy

S. Khani Moghanaki; M. Kazeminezhad; R. Logé 

Microstructure tailoring of selenium-core multimaterial optoelectronic fibers

W. Yan; T. Nguyen-Dang; C. Cayron; T. Dasgupta; A. G. Page et al. 

Method and device for fabrication of 3d multi – material (composite) parts by selective laser melting combined with laser welding and cutting

N. Kalentics; R. Logé 

Method and Device for Implementing Laser Shock Peening or Warm Laser Shock Peening During Selective Laser Melting

N. Kalentics; R. Logé; E. Boillat 

Orientation Preference of Recrystallization in Supersaturated Aluminum Alloys Influenced by Concurrent Precipitation

Q. Zhao; K. Huang; Y. Li; K. Marthinsen 

A review of dynamic recrystallization phenomena in metallic materials

K. Huang; R. Logé 

Angular distortive matrices of phase transitions in the fcc-bcc-hcp system

C. Cayron 

Numerical Modeling of Tube Forming by HPTR Cold Pilgering Process

D. Sornin; E. Pachon-Rodriguez; E. Venegas-Marquez; K. Mocellin; R. Logé 

The Influence of Processing Conditions on Microchemistry and the Softening Behavior of Cold Rolled Al-Mn-Fe-Si Alloys

N. Wang; K. Huang; Y. Li; K. Marthinsen 

On the sluggish recrystallization of a cold-rolled Al–Mn–Fe–Si alloy

K. Huang; R. E. Logé; K. Marthinsen 

Creep and stress relaxation of a FeMnSi-based shape memory alloy at low temperatures

C. Leinenbach; W. J. Lee; A. Lis; A. Arabi-Hashemi; C. Cayron et al. 

Investigation of the relationships between mechanical properties and microstructure in a Fe-9%Cr ODS steel

B. Hary; T. Guilbert; P. Wident; T. Baudin; R. Logé et al. 

Mean field modelling of dynamic and post-dynamic recrystallization during hot deformation of Inconel 718 in the absence of δ phase particles

M. Zouari; N. Bozzolo; R. Logé 

Zener Pinning

K. Huang; R. Logé 

Comment on ‘A new nanoscale metastable iron phase in carbon steels’

C. Cayron 

The effect of heating rate on the softening behaviour of a deformed Al–Mn alloy with strong and weak concurrent precipitation

K. Huang; K. Marthinsen 

Microstructural characterizations of 14Cr ODS ferritic steels subjected to hot torsion

A. Karch; D. Sornin; F. Barcelo; S. Bosonnet; Y. de Carlan et al. 

Continuous atomic displacements and lattice distortion during fcc–bcc martensitic transformation

C. Cayron 

Factors affecting the strength of P{011}〈566〉-texture after annealing of a cold-rolled Al–Mn–Fe–Si alloy

K. Huang; Y. J. Li; K. Marthinsen 

Effect of heterogeneously distributed pre-existing dispersoids on the recrystallization behavior of a cold-rolled Al–Mn–Fe–Si alloy

K. Huang; Y. Li; K. Marthinsen 

A mean field model of dynamic and post-dynamic recrystallization predicting kinetics, grain size and flow stress

O. Beltran; K. Huang; R. Logé 

Selective Growth of Low Stored Energy Grains During δ Sub-solvus Annealing in the Inconel 718 Nickel-Based Superalloy

A. Agnoli; M. Bernacki; R. Logé; J-M. Franchet; J. Laigo et al. 

Anisotropic mechanical behavior and formability criterion for zinc sheets

M. Milesi; R. E. Loge; Y. Jansen 

Development of a level set methodology to simulate grain growth in the presence of real secondary phase particles and stored energy – Application to a nickel-base superalloy

A. Agnoli; N. Bozzolo; R. Logé; J-M. Franchet; J. Laigo et al. 

Multipass forging of Inconel 718 in the delta-Supersolvus domain: assessing and modeling microstructure evolution

M. Zouari; R. E. Loge; O. Beltran; S. Rousselle; N. Bozzolo 

Metastable precipitation in 6XXX Al alloys as revealed by STEM-ADF at the atomic level

T. Epicier; C. Cayron 

One-step model of the face-centred-cubic to body-centred-cubic martensitic transformation

C. Cayron 

Excimer laser crystallization of amorphous silicon on metallic substrate

F. Delachat; F. Antoni; A. Slaoui; C. Cayron; C. Ducros et al. 

Chalcopyrite thin-film solar cells by industry-compatible ink-based process

F. Roux; S. Amtablian; M. Anton; G. Besnard; L. Bilhaut et al. 

The effect of processing parameters on the dynamic recrystallisation behaviour of API-X70 pipeline steel

A. Al Shahrani; N. Yazdipour; A. Dehghan-Manshadi; A. Gazder; C. Cayron et al. 

Multiscale phase mapping of LiFePO4-based electrodes by transmission electron microscopy and electron forward scattering diffraction

D. Robert; T. Douillard; A. Boulineau; G. Brunetti; P. Nowakowski et al. 

Crystallographic Analysis of Isothermally Transformed Bainite in 0.2C-2.0Mn-1.5Si-0.6Cr Steel Using EBSD

P. Suikkanen; C. Cayron; A. DeArdo; L. Karjalainen 

Incidence of mechanical alloying contamination on oxides and carbides formation in ODS ferritic steels

P. Olier; M. Couvrat; C. Cayron; N. Lochet; L. Chaffron 

Relationships between mechanical behavior and microstructural evolutions in Fe 9Cr-ODS during the fabrication route of SFR cladding tubes

L. Toualbi; C. Cayron; P. Olier; R. Logé; Y. De Carlan 

An anisotropic stress based criterion to predict the formability and the fracture mechanism of textured zinc sheets

Y. Jansen; R. Logé; M. Milesi; E. Massoni 

Thermo-mechanical fatigue behaviour of welded tubular parts made of ferritic stainless steel

M-C. Robin; D. Delagnes; R. Logé; P-O. Bouchard; S. Da Costa et al. 

EBSD coupled to SEM in situ annealing for assessing recrystallization and grain growth mechanisms in pure tantalum

C. Kerisit; R. Logé; S. Jacomet; V. Llorca; N. Bozzolo 

Strain induced abnormal grain growth in nickel base superalloys

N. Bozzolo; A. Agnoli; N. Souai; M. Bernacki; R. Loge 

Development of adapted material testing for cold pilgering process of ODS tubes

K. Mocellin; E. Vanegas; Y. De Carlan; R. Logé 

CW laser induced crystallization of thin amorphous silicon films deposited by EBE and PECVD

Z. Said-Bacar; P. Prathap; C. Cayron; F. Mermet; Y. Leroy et al. 

Embedded layer of Ag nanoparticles prepared by a combined PECVD/PVD process producing SiO xC y-Ag nanocomposite thin films

L. Bedel; C. Cayron; M. Jouve; F. Maury 

Evidence of anti-coking behavior of La 0.8Sr 0.2Cr 0.98Ru 0.02O 3 as potential anode material for Solid Oxide Fuel Cells directly fed under methane

T. Caillot; G. Gauthier; P. Delichère; C. Cayron; F. Cadete Santos Aires 

Hidden defects in silicon nanowires

M. Den Hertog; C. Cayron; P. Gentile; F. Dhalluin; F. Oehler et al. 

Improved multicrystalline silicon ingot crystal quality through seed growth for high efficiency solar cells

A. Jouini; D. Ponthenier; H. Lignier; N. Enjalbert; B. Marie et al. 

Aluminum catalyzed growth of silicon nanowires: Al atom location and the influence of silicon precursor pressure on the morphology

D. Kohen; C. Cayron; E. De Vito; V. Tileli; P. Faucherand et al. 

Assessment of a new fabrication route for Fe-9Cr-1W ODS cladding tubes

L. Toualbi; C. Cayron; P. Olier; J. Malaplate; M. Praud et al. 

A simple approach for the modeling of an ODS steel mechanical behavior in pilgering conditions

E. Vanegas-Márquez; K. Mocellin; L. Toualbi; Y. De Carlan; R. Logé 

Fast in-situ annealing stage coupled with EBSD: A suitable tool to observe quick recrystallization mechanisms

N. Bozzolo; S. Jacomet; R. Logé 

Evolution of microstructure and twin density during thermomechanical processing in a γ-γ’ nickel-based superalloy

N. Bozzolo; N. Souaï; R. Logé 

Using cross stamping to test Zinc sheets formability

Y. Jansen; R. Logé; M. Milesi; S. Manov; E. Massoni 

Microstructure and thermoelectric properties of bulk and porous n-type silicon-germanium alloy prepared by HUP

A. Kallel; G. Roux; T. Derycke; C. Martin; M. Marinova et al. 

Understanding and Modeling of Grain Boundary Pinning in Inconel 718

A. Agnoli; M. Bernacki; R. Logé; J-M. Franchet; J. Laigo et al. 

Techniques for modelling microstructure in metal forming processes

Y. Chastel; R. Logé; M. Bernacki 

Crystallographic analysis of martensite in 0.2C-2.0Mn-1.5Si-0.6Cr steel by EBSD

A. DeArdo; C. Cayron; L. Karjalainen; P. Suikkanen 

Microcracking of high zirconia refractories after t→m phase transition during cooling: An EBSD study

A. Sibil; T. Douillard; C. Cayron; N. Godin; M. R’mili et al. 

Combined effect of stress and strain on crystallographic orientation of bainite

A. Shirzadi; H. Abreu; C. Cayron; S. Ubhi 

Quantification of multiple twinning in face centred cubic materials

C. Cayron 

New theory of fcc-bcc martensitic transformations in steels

C. Cayron 

Crystallographic analysis of martensite in 0.2C-2.0Mn-1.5Si-0.6Cr steel using EBSD

P. Suikkanen; C. Cayron; A. DeArdo; L. Karjalainen 

Confirmation of the domino-cascade model by lifepo4/fepo 4 precession electron diffraction

G. Brunetti; D. Robert; P. Bayle-Guillemaud; J. Rouvière; E. Rauch et al. 

Reply to “comments on ‘The mechanisms of the fcc-bcc martensitic transformation revealed by pole figures'”

C. Cayron; F. Barcelo; Y. De Carlan 

Al catalyzed growth of silicon nanowires and subsequent in situ dry etching of the catalyst for photovoltaic application

D. Kohen; V. Tileli; C. Cayron; P. Faucherand; C. Morin et al. 

Level set framework for the finite-element modelling of recrystallization and grain growth in polycrystalline materials

M. Bernacki; R. Logé; T. Coupez 

A new approach to modeling the flow curve of hot deformed austenite

X. Quelennec; N. Bozzolo; J. Jonas; R. Loge 

A two-site mean field model of discontinuous dynamic recrystallization

P. Bernard; S. Bag; K. Huang; R. Logé 

A nano-particle synthesis technology dedicated to solar cells applications

R. Najjar; S. Boutami; C. Cayron; N. Baclet; V. Muffato et al. 

Identification of cyclic and anisotropic behaviour of ODS steels tubes

E. Vanegas; K. Mocellin; R. Logé 

Theoretical and experimental evaluation of the formability of anisotropic zinc sheets

Y. Jansen; R. Logé; M. Milesi; S. Manov; E. Massoni 

Measurement of nanograin orientations: Application to Cu interconnects

G. Brunetti; R. Galand; J. Rouvière; L. Clément; C. Cayron et al. 

Quasi In situ EBSD investigation of static recrystallization in 304L stainless steel at elevated temperature

K. Huang; S. Jacomet; R. Logé 

Inhomogeneous nucleation and growth of palladium and alloyed cobalt during self-aligned capping of advanced copper interconnects

S. Olivier; T. Decorps; M-L. Calvo-Muñoz; S. Da Silva; C. Cayron et al. 

Identification of new phases in annealed Fe-18CrWTi ODS powders

C. Cayron; A. Montani; D. Venet; Y. Carlan 

Reconstruction of the cubic and tetragonal oarent grains from electron backscatter diffraction maps of monoclinic zirconia

C. Cayron; T. Douillard; A. Sibil; G. Fantozzi; S. Sao-Jao 

The mechanisms of the fcc-bcc martensitic transformation revealed by pole figures

C. Cayron; F. Barcelo; Y. Carlan 

About the possibility of grain boundary engineering via hot-working in a nickel-base superalloy

N. Souaï; N. Bozzolo; L. Nazé; Y. Chastel; R. Logé 

A multi-scale approach for high cycle anisotropic fatigue resistance: Application to forged components

M. Milesi; Y. Chastel; E. Hachem; M. Bernacki; R. Logé et al. 

3D finite element model of semi-solid permeability in an equiaxed granular structure

Z. Sun; R. Logé; M. Bernacki 

Novel nanotechnology for a fine plasmon wavelength tuning

R. Najjar; S. Boutami; C. Cayron; V. Muffato; A. Kean et al. 

Effect of thermomechanical processes on Σ3 grain boundary distribution in a nickel base superalloy

N. Souaï; R. Logé; Y. Chastel; N. Bozzolo; V. Maurel et al. 

Odd electron diffraction patterns in silicon nanowires and silicon thin films explained by microtwins and nanotwins

C. Cayron; M. Den Hertog; L. Latu-Romain; C. Mouchet; C. Secouard et al. 

Crystallographic reconstruction methods to study phase transformations by EBSD

C. Cayron 

Adaptive mesh refinement and automatic remeshing in crystal plasticity finite element simulations

H. Resk; L. Delannay; M. Bernacki; T. Coupez; R. Logé 

Structural reactivation in plate tectonics controlled by olivine crystal anisotropy

A. Tommasi; M. Knoll; A. Vauchez; J. Signorelli; C. Thoraval et al. 

A multiscale approach to model the anisotropic deformation of lithospheric plates

M. Knoll; A. Tommasi; R. Logé; J. Signorelli 

Numerical life prediction of mechanical fatigue for hot forging tools

K. Mocellin; M. Ferraro; V. Velay; R. Logé; F. Rézaï-Aria 

Finite element model of primary recrystallization in polycrystalline aggregates using a level set framework

M. Bernacki; H. Resk; T. Coupez; R. Logé 

Cu grain growth in damascene narrow trenches

S. Maitrejean; V. Carreau; O. Thomas; S. Labat; B. Kaouache et al. 

A multiscale analysis of ductile steel grades damage and fracture mechanisms

P. Bouchard; L. Bourgeon; R. Loge; C. Verdu; E. Marie 

Modelling of primary recrystallization using digital microstructures

R. Logé; M. Bernacki; H. Resk; H. Digonnet; Y. Chastel et al. 

Importance of the α → β transformation in the variant selection mechanisms of thermomechanically processed titanium alloys

C. Cayron 

Growth of one-dimensional Si/SiGe heterostructures by thermal CVD

C. Mouchet; L. Latu-Romain; C. Cayron; E. Rouviere; C. Celle et al. 

Growth parameters and shape specific synthesis of silicon nanowires by the VLS method

L. Latu-Romain; C. Mouchet; C. Cayron; E. Rouviere; J-P. Simonato 

Linking plastic deformation to recrystallization in metals using digital microstructures

R. Loge; M. Bernacki; H. Resk; L. Delannay; H. Digonnet et al. 

On the influence of particle distribution and reverse loading on damage mechanisms of ductile steels

P. Bouchard; L. Bourgeon; H. Lachapèle; E. Maire; C. Verdu et al. 

Multiaxial fatigue criterion accounting for anisotropy in forged components

M. Milesi; Y. Chastel; M. Bernacki; R. Logé; P. Bouchard 

Level set framework for the numerical modelling of primary recrystallization in polycrystalline materials

M. Bernacki; Y. Chastel; T. Coupez; R. Logé 

Modelling dynamic and post-dynamic recrystallization of Zy-4 during and after hot extrusion

B. Gaudout; E. Felder; F. Montheillet; V. Barranx; P. Barberis et al. 

Prediction of tantalum microstructure evolution during thermomechanical treatments using FEM calculations with a dislocation density based constitutive law

M. Houillon; R. Logé; E. Ramel; E. Massoni 

GenOVa: A computer program to generate orientational variants

C. Cayron 

Examination of Be//Cu joints in hipped Be tiles by using Ion Beam Analysis methods

E. De Vito; H. Khodja; C. Cayron; P. Lorenzetto 

ARPGE: A computer program to automatically reconstruct the parent grains from electron backscatter diffraction data

C. Cayron 

Multiple twinning in cubic crystals: Geometric/algebraic study and its application for the identification of the Σ3n grain boundaries

C. Cayron 

Catalytic steam reforming of methane over La0.8Sr0.2CrO3 based Ru catalysts

T. Caillot; P. Gélin; J. Dailly; G. Gauthier; C. Cayron et al. 

Using Lagrangian particles to efficiently describe microstructure evolution in metal forming – Application to texture-induced mechanical anisotropy

M. Béringhier; L. Delannay; Y. Chastel; R. Logé 

Alloying effects on microstructure and mechanical properties of high volume fraction SiC-particle reinforced Al-MMCs made by squeeze casting infiltration

O. Beffort; S. Y. Long; C. Cayron; J. Kuebler; P. A. Buffat 

Reducing computational cost and allowing automatic remeshing in FEM models of metal forming coupled with polycrystal plasticity

R. Logé; M. Béringhier; Y. Chastel; L. Delannay 

3D FEM simulation of the flow forming process using lagrangian and ALE methods

M. Houillon; E. Massoni; E. Ramel; R. Logé 

Development of numerical tools for the multiscale modelling of recrystallization in metals, based on a digital material framework

M. Bernacki; H. Digonnet; H. Resk; T. Coupez; R. Logé 

Groupoid of orientational variants

C. Cayron 

Multilayered and nanolayered hard nitride thin films deposited by cathodic arc evaporation. Part 1: Deposition, morphology and microstructure

C. Ducros; C. Cayron; F. Sanchette 

Reconstruction of parent grains from EBSD data

C. Cayron; B. Artaud; L. Briottet 

Coupling the thermal and mechanical fields to metallurgical evolutions within a finite element description of a forming process

R. Logé; Y. Chastel 

Analysis of electromigration voiding phenomena in Cu interconnects

L. Arnaud; J. Guillaumond; N. Claret; C. Cayron; C. Guedj et al. 

Present development status of EUROFER and ODS-EUROFER for application in blanket concepts

R. Lindau; A. Moslang; M. Rieth; M. Klimiankou; E. Materna-Morris et al. 

Damage mechanisms at a microscopic scale of PM Ti-6Al-4V at 20 K

S. di Iorio; L. Briottet; C. Cayron; E. Rauch; D. Guichard 

Microstructural evolution of Y2O3 and MgAl 2O4 ODS EUROFER steels during their elaboration by mechanical milling and hot isostatic pressing

C. Cayron; E. Rath; I. Chu; S. Launois 

Influence of modelling variables on the distribution of lattice strains in a deformed polycrystal, with reference to neutron diffraction experiments

R. Logé; H. Turkmen; M. Miller; R. Rogge; P. Dawson 

On the mechanical behaviour of AA 7075-T6 during cyclic loading

H. Turkmen; R. Loge; P. Dawson; M. Miller 

Measurement of In-Grain Orientation Gradients by EBSD and Comparison with Finite Element Results

L. Delannay; R. Logé; Y. Chastel; J. Signorelli; P. Van Houtte 

Prediction of residual stresses and springback after bending of a textured aluminium plate

L. Delannay; R. Logé; Y. Chastel; P. Van Houtte 

3D elastic-plastic finite element simulation of cold pilgering of zircaloy tubes

P. Montmitonnet; R. Logé; M. Hamery; Y. Chastel; J-L. Doudoux et al. 

Prediction of intergranular strains in cubic metals using a multisite elastic-plastic model

L. Delannay; R. Logé; Y. Chastel; P. Van Houtte 

Matrix chemistry optimisation of Al/Altex composites preserving both fibres and matrix alloy integrity

S. Vaucher; O. Beffort; S. Long; C. Cayron; P. Buffat 

TEM study of interfacial reactions and precipitation mechanisms in Al2O3 short fiber or high volume fraction SiC particle reinforced Al-4Cu-1Mg-0.5Ag squeeze-cast composites

C. Cayron 

Sensitivity of α-ZY4 high-temperature deformation textures to the β-quenched precipitate structure and to recrystallization: Application to hot extrusion

R. Logé; J. Signorelli; Y. Chastel; M. Perrin; R. Lebensohn 

Parameter identification method for a polycrystalline viscoplastic selfconsistent model based on analytical derivatives of the direct model equations

J. Signorelli; R. Logé; Y. Chastel; R. Lebensohn 

Transmission electron microscopy study of the β′ phase (Al-Mg-Si alloys) and QC phase (Al-Cu-Mg-Si alloys): ordering mechanism and crystallographic structure

P. Buffat; C. Cayron 

Structural Phase Transition in Al-Cu-Mg-Si and Al-Mg-Si Alloys: Ordering Mechanisms and Crystallographic Structures

C. Cayron; P. Buffat 

Effect of SiO2 binder on the precipitation state of an AlCu4Mg1Ag/Saffil composite

C. Cayron; P. Buffat; O. Beffort; S. Long 

About the epitaxial growth of Mg-subgrains on Al2MgC2 interfacial carbides in a squeeze cast Mg-4Al/T300 metal matrix composite

C. Cayron; P. Buffat; C. Hausmann; O. Beffort 

Microstructure and mechanical properties of a high volume fraction SiC particle reinforced AlCu4MgAg squeeze casting

S. Long; O. Beffort; C. Cayron; C. Bonjour 

Structural phase transition in Al-Cu-Mg-Si alloys by transmission electron microscopy study on an Al-4wt% Cu-1 wt% alloy reinforced by SiC particles

C. Cayron; L. Sagalowicz; O. Beffort; P. Buffat 

Nonequilibrium thermodynamics of ferroelectric domain evolution

R. Loge; Z. Suo