Influence of Growth Location and Extraction Method on the Properties of Cameroonian Musa acuminata Leaf Vein Fibers

M. G. F. Fokam; C. B. Fokam; A. M. Chengoue; V. Rougier; N. Halawani et al. 

A new ISO standard for the experimental characterization of in-plane permeability of fibrous reinforcements

D. May; S. G. Advani; M. Duhovic; A. Endruweit; E. Fauster et al. 

Towards standardisation of the out-of-plane permeability measurement for reinforcement textiles

A. X. Yong; A. Endruweit; A. George; D. May; Y. A. Aksoy et al. 

Development of a Sustainable Thermoplastic Composite Material Using Manicaria saccifera Fabric and Elium® Resin

J. Porras; M. A. Morales; C. Hernandez; A. Maranon; V. Michaud et al. 

Translaminar fracture in (non–)hybrid thin-ply fibre-reinforced composites: An in-depth examination through a novel mini-compact tension specimen compatible with microscale 4D computed tomography

S. AhmadvashAghbash; G. Broggi; A. Aydemir; A. Argyropoulos; J. Cugnoni et al. 

Combined computational-experimental investigation of residual stresses and pre-cracking in mode I behaviour of thick adhesively bonded GFRP composite joints

A. Sharma; A. Shivaie Kojouri; J. Fan; A. Vassilopoulos; V. Michaud et al. 

Influence of Si3N4 fillers and pyrolysis profile on the microstructure of additively manufactured silicon carbonitride ceramics derived from polyvinylsilazane

A. Balkan; X. Wang; A. Gurlo 

Healable adhesive paste development for thick adhesive joints

J. Fan; A. Aracama Ruiz De Alegría; A. Vassilopoulos; V. Michaud 

Photocurable Thiol-Ene/Nanocellulose Elastomeric Composites for Bioinspired and Fluorine-Free Superhydrophobic Surfaces

A. Balkan; E. Sola; F. Karasu; Y. Leterrier 

Enabling simultaneous reprocessability and fire protection via incorporation of phosphine oxide monomer in epoxy vitrimer

Z. Huang; W. W. Klingler; D. Roncucci; C. Polisi; V. Rougier et al. 

Hermetic, Hybrid Multilayer, Sub-5µm-Thick Encapsulations Prepared with Vapor-Phase Infiltration of Metal Oxides in Conformal Polymers for Flexible Bioelectronics

M. Mariello; M. von Allmen; K. Wu; M. Van Gompel; S. Lacour et al. 

Development and Performance Evaluation of Hybrid Iono-organogels for Efficient Impact Mitigation

V. Varanges; V. K. Rana; V. Phillippe; P-E. Bourban; D. Pioletti 

Wireless, battery-free, and real-time monitoring of water permeation across thinfilm encapsulation

M. Mariello; J. D. Rosenthal; F. Cecchetti; M. Gao; A. Skrivervik et al. 

Void content and displacement ratio effects on fatigue crack growth in thick adhesively bonded composite joints under constant amplitude loading

J. Fan; K. Ikeda; A. Vassilopoulos; V. Michaud 

Enhancing the mechanical performance of composite corners through microstructural optimization and geometrical design

V. Varanges; Y. Lebaupin; R. Amacher; V. Rougier; V. Schnyder et al. 

An experimental and analytical study of mode I fracture and crack kinking in thick adhesive joints

A. Shivaie Kojouri; J. Karami; K-A. Kalteremidou; J. Fan; A. Sharma et al. 

Fluorine Free Surface Modification of Microfibrillated Cellulose-Clay Composite Films: Effect of Hydrophobicity on Gas Barrier Performance

M. A. Poothanari; Y. Leterrier 

Biobased Composites from Eugenol- and Coumarin-Derived Methacrylic Latex and Hemp Nanocellulose: Cross-Linking via [2+2] Photocycloaddition and Barrier Properties

S. D. Vacche; S. Molina-Gutierrez; G. Ferraro; V. Ladmiral; S. Caillol et al. 

Magnesium Test: Universal and Ultra-Sensitive Method for Measuring Reliability of Thin-Film-Encapsulated Bioelectronic Implants in Physiological Environment

M. Mariello; K. Ayama; K. Wu; C. Baudino; L. Wang et al. 

Optical Monitoring of Water Side Permeation in Thin Film Encapsulation

K. Wu; M. Mariello; Y. Leterrier; S. P. Lacour 

Performance polyamides built on a sustainable carbohydrate core

L. P. Manker; M. A. C. Hedou; C. Broggi; M. J. F. Jones; K. Kortsen et al. 

Saturated transverse permeability of unidirectional rovings for pultrusion: The effect of microstructural evolution through compaction

O. Yuksel; B. Caglar; G. Broggi; V. Michaud; R. Akkerman et al. 

A multiscale consolidation model for press molding of hybrid textiles into complex geometries

V. Werlen; C. Rytka; C. Dransfeld; C. Brauner; V. Michaud 

Mode I fracture of thick adhesively bonded GFRP composite joints for wind turbine rotor blades

J. Fan; A. P. Vassilopoulos; V. Michaud 

On the influence of flow-front orientation on stringer stiffened composite panels in water impacts

C. Pearson; M. de Mourgues; M. Battley; V. Michaud; J. Little et al. 

Self-catalysed frontal polymerisation enables fast and low-energy processing of fibre reinforced polymer composites

J. Staal; B. Caglar; V. Michaud 

Magnesium Optrodes for Real-Time Optical Monitoring of Water Transport in Ultrathin Encapsulations for Bioelectronics

M. Mariello; D. Kavungal; A. Gallagher; M. B. Cleusix; M. N. Roueche et al. 

Design for demise applied to spacecraft structural panels and experiments for ClearSpace One platform

Multilayer diffusion-barrier composites based on microfibrillated cellulose from wood, bacterial and algae sources

Improved Material Formulations for Thick Adhesive Joints in Wind Turbine Blades

Tuning the Mechanical Properties of Poly(butylene xylosediglyoxylate) via Compounding Strategies

M. Vieli; M. A. C. Hedou; P. B. V. Scholten; A. Demongeot; L. P. Manker et al. 

LCM of thermoset-based fiber reinforced composites for large-scale applications: are process kinetics and structural properties antagonistic?

V. Michaud 

ECCM Research Topic on advanced manufacturing of composites

C. Binetruy; B. Caglar; L. Daelemans; C. Dransfeld; V. Michaud 

Effect of wettability and textile architecture on fluid displacement and pore formation during infiltration of carbon fibrous preforms

H. Teixido; B. Caglar; V. Michaud 

Measurement and modelling of dynamic fluid saturation in carbon reinforcements

H. Teixidó; G. Broggi; B. Caglar; V. Michaud 

Thermal management in radical induced cationic frontal polymerisation for optimised processing of fibre reinforced polymers

J. Staal; E. Smit; B. Çaglar; V. Michaud 

Recyclable flame retardant phosphonated epoxy based thermosets enabled via a reactive approach

W. W. Klingler; V. Rougier; Z. Huang; D. Parida; S. Lehner et al. 

Implementation and parametric study of J-integral data reduction methods for the translaminar toughness of hierarchical thin-ply composites

G. Broggi; J. Cugnoni; V. Michaud 

Influence of the molecular weight and physical properties of a thermoplastic polymer on its dynamic wetting behavior

V. Rougier; J. Cellier; B. Duchemin; M. Gomina; J. Breard 

Benchmark exercise on image-based permeability determination of engineering textiles: Microscale predictions

E. Syerko; T. Schmidt; D. May; C. Binetruy; S. Advani et al. 

A model for the consolidation of hybrid textiles considering air entrapment, dissolution and diffusion

V. Werlen; R. Vocke; C. Brauner; C. Dransfeld; V. Michaud et al. 

Advancing spacecraft demisability through a novel composite bolt joint system: a step toward sustainable and safe space environments

A. A. Looten; A. Vodermayer; A. Caiazzo; R. Usinger; M. Richard et al. 

INFLUENCE OF VOIDS ON THICK DCB JOINT BEHAVIOR

J. Fan; A. Vassilopoulos; V. Michaud 

Colombian Sustainability Perspective on Fused Deposition Modeling Technology: Opportunity to Develop Recycled and Biobased 3D Printing Filaments

M. A. Morales; A. Maranon; C. Hernandez; V. Michaud; A. Porras 

A multi scale consolidation model for press moulding of hybrid textiles into complex geometries

Visualization and modelling of dynamic flow in fibrous preforms for liquid composite molding

Multi-scale characterization and modeling of notched strength and translaminar fracture in hybrid thin-ply composites based on different carbon fiber grades

Strategies for energy-efficient frontal polymerisation processing and microstructural evaluation of fibre reinforced composites

Process development of pre-impregnated hybrid thin-ply composites

INFLUENCE OF VOIDS ON THICK DCB JOINT BEHAVIOR

J. Fan; A. Vassilopoulos; V. Michaud 

3D representation of meso-voids location and morphology within the fibrous pore space of three carbon fabrics

H. L. Teixido Pedarros; V. Michaud 

Three-dimensional micro-CT images of UV-frozen flow fronts recorded at different flow regimes

V. Michaud; J. Staal 

Simulations of Radical Induced Cationic Frontal Polymerisation under different applied initial temperatures, trigger times and glass fibre contents

V. Michaud; J. Staal 

Recycling of Bottle Grade PET: Influence of HDPE Contamination on the Microstructure and Mechanical Performance of 3D Printed Parts

J. Vaucher; A. Demongeot; V. Michaud; Y. Leterrier 

Novel tooling for direct melt impregnation of textile with variotherm injection moulding: Methodology and proof of concept

V. Werlen; C. Rytka; S. Wegmann; H. Philipp; Y. Khalaf et al. 

A Novel Method to Quantify Self-Healing Capabilities of Fiber-Reinforced Polymers

C. Scazzoli; R. Trigueira; A. Cohades; V. Michaud 

Sustainable polyesters via direct functionalization of lignocellulosic sugars

L. P. Manker; G. R. Dick; A. Demongeot; M. A. Hedou; C. Rayroud et al. 

Uniformly Dispersed Poly(lactic acid)-Grafted Lignin Nanoparticles Enhance Antioxidant Activity and UV-Barrier Properties of Poly(lactic acid) Packaging Films

A. Boarino; A. Schreier; Y. Leterrier; H-A. Klok 

Photoresponsive Movement in 3D Printed Cellulose Nanocomposites

L. A. E. Mueller; A. Demongeot; J. Vaucher; Y. Leterrier; J. Avaro et al. 

On the durability of surgical masks after simulated handling and wear

V. Varanges; B. Çaglar; Y. Lebaupin; T. Batt; W. He et al. 

Photocured Nanocellulose Composites: Recent Advances

M. A. Poothanari; A. Schreier; K. Missoum; J. Bras; Y. Leterrier 

Community Masks-from an Emergency Solution to an Innovation Booster for the Textile Industry

T. Batt; G. Herwig; S. Annaheim; P. Clement; L. Furer et al. 

Enhanced ductility in high performance polyamides due to strain-induced phase transitions

N. Candau; J-M. Chenal; O. Lame; P. Schouwink; V. Michaud et al. 

A life cycle analysis of novel lightweight composite processes: Reducing the environmental footprint of automotive structures

S. Wegmann; C. Rytka; M. Diaz-Rodenas; V. Werlen; C. Schneeberger et al. 

A functional approach towards the design, development, and test of an affordable dynamic prosthetic foot

M. Falbriard; G. Huot; M. Janier; R. Chandran; M. Rechsteiner et al. 

Deep learning accelerated prediction of the permeability of fibrous microstructures

B. Caglar; G. Broggi; M. A. Ali; L. Orgéas; V. Michaud 

An Injectable Family Of Soft Tissue Hydrogel Adhesives For Knee Applications

P. Karami; C. Wyss; P-E. Bourban; P. Procter; C. Moser et al. 

Investigation of bulk adhesive material and thick adhesive joints for wind turbine applications

J. Fan; J. Karami; A. Kojouri; D. van Hemelrijck; A. Vassilopoulos et al. 

Recent Advances in Encapsulation of Flexible Bioelectronic Implants: Materials, Technologies, and Characterization Methods

M. Mariello; K. Kim; K. Wu; S. P. Lacour; Y. Leterrier 

Capillary Effects in Fiber Reinforced Polymer Composite Processing: A Review

H. Teixido; J. Staal; B. Caglar; V. Michaud 

Proceedings of the 20th European Conference on Composite Materials – Composites Meet Sustainability (Vol 1-6)

A. Vassilopoulos; V. Michaud 

High-performance polyamides with engineered disorder

N. Candau; S. Galland; J. Cretenoud; S. Balog; V. Michaud et al. 

Stiff, Strong, Tough, and Highly Stretchable Hydrogels Based on Dual Stimuli-Responsive Semicrystalline Poly(urethane–urea) Copolymers

N. Candau; G. Stoclet; J-F. Tahon; A. Demongeot; P. Schouwink et al. 

In-series sample methodology for permeability characterization demonstrated on carbon nanotube-grafted alumina textiles

J. Staal; B. Çaglar; T. Hank; B. L. Wardle; L. Gorbatikh et al. 

Extended Barrier Lifetime of Partially Cracked Organic/Inorganic Multilayers for Compliant Implantable Electronics

K. Kim; M. Van Gompel; K. Wu; G. Schiavone; J. Carron et al. 

Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise

A. Yong; A. Aktas; D. May; A. Endruweit; S. Advani et al. 

Resin Transfer molding of High-Fluidity Polyamide-6 with modified Glass-Fabric preforms

C. Gomez; D. Salvatori; B. Caglar; R. Trigueira; G. Orange et al. 

Valorization of Byproducts of Hemp Multipurpose Crop: Short Non-Aligned Bast Fibers as a Source of Nanocellulose

S. Dalle Vacche; V. Karunakaran; A. Patrucco; M. Zoccola; L. Douard et al. 

Viscoelastic behavior of suspensions of reduced graphene oxide nanoparticles in epoxy

M. Majidian; A. Magrez; L. Forro; Y. Leterrier 

In-operando dynamic visualization of flow through porous preforms based on X-ray phase contrast imaging

H. Teixidó; B. Caglar; V. Revol; V. Michaud 

Silk granular hydrogels self-reinforced with regenerated silk fibroin fibers

C. S. Wyss; P. Karami; A. Demongeot; P-E. Bourban; D. Pioletti 

Mechanical reinforcement and memory effect of strain-induced soft segment crystals in thermoplastic polyurethane-urea elastomers

N. Candau; G. Stoclet; J-F. Tahon; A. Demongeot; E. Yilgor et al. 

Kinematic and mechanical response of dry woven fabrics in through-thickness compression: Virtual fiber modeling with mesh overlay technique and experimental validation

L. Daelemans; B. Tomme; B. Caglar; V. Michaud; J. Van Stappen et al. 

An Intrinsically-Adhesive Family of Injectable and Photo-Curable Hydrogels with Functional Physicochemical Performance for Regenerative Medicine

P. Karami; N. Nasrollahzadeh; C. Wyss; A. O’Sullivan; M. Broome et al. 

A numerical approach to characterize the viscoelastic behaviour of fibre beds and to evaluate the influence of strain deviations on viscoelastic parameter extraction

V. Werlen; C. Rytka; V. Michaud 

Development and Characterization of Rice Husk and Recycled Polypropylene Composite Filaments for 3D Printing

M. A. Morales; C. L. Atencio Martinez; A. Maranon; C. Hernandez; V. Michaud et al. 

Experimental characterisation of textile compaction response: A benchmark exercise

A. Yong; A. Aktas; D. May; A. Endruweit; S. Lomov et al. 

Functionalized Fiber Reinforced Composites via Thermally Drawn Multifunctional Fiber Sensors

B. Çaglar; W. Esposito; D. T. Nguyen; S. Laperrousaz; V. Michaud et al. 

Surface modified microfibrillated cellulose‐poly(vinylidene fluoride) composites: β‐phase formation, viscoelastic and dielectric performance

M. A. Poothanari; V. Michaud; D. Damjanovic; Y. Leterrier 

Poly(lactide)/cellulose nanocrystal nanocomposites by high-shear mixing

O. Oguz; N. Candau; A. Demongeot; M. K. Citak; F. N. Cetin et al. 

Radical photoinduced cationic frontal polymerization in porous media

D. Maugeri; M. Sangermano; Y. Leterrier 

Permeability properties of composite reinforcements

V. Michaud 

Edible fiber

J. Engmann; E-R. Janecek; V. Michaud; Y. Qu; F. Sordo et al. 

Elongated microstructured capacitive sensor

F. Sorin; W. Esposito; V. Michaud; C. Dong; B. Çaglar et al. 

Reusability of filtering facepiece respirators after decontamination through drying and germicidal UV irradiation

D. Vernez; J. Save; A. Oppliger; N. Concha-Lozano; N. B. Hopf et al. 

Statistical Fatigue Investigation and Failure Prediction of a Healable Composite System

N. Hostettler; A. Cohades; V. Michaud 

Special issue for flow processing in composite materials

T. S. Lundstrom; V. Michaud 

Hybrid granular hydrogels: combining composites and microgels for extended ranges of material properties

C. S. Wyss; P. Karami; P-E. Bourban; D. P. Pioletti 

Cross-linkable polymer, hydrogel, and method of preparation thereof

P. Karami; D. Pioletti; C. S. Wyss; P-E. Bourban; C. Moser 

Composite material

A. Cohades; V. Michaud