Master Theses

2022  
   
Max Dupont PV Power Source Emulator for DC and Three Phase AC Grids
   
Nicolas Bornet Parallel Operation of Current Regulated Buck Converters , (MSc Thesis at ETH, Zurich, Switzerland)
   
2021  
   
Ruifan Qiu Characterization  and Modelling of Litz-Wire Losses for Medium-Frequency Transformer  Applications, (MSc Thesis in industry: HITACHI ABB Power Grids, Geneva, Switzerland)
   
Teodora Kolarski Thermal Characterization of Oil-Immersed Transformer Windings
   
Simon Strobl Hardware in the Loop Modeling of MVDC Railway Electrification Systems
   
Jerome Savary RT-HIL Concept Development and Verification for the 4Q Robicon Converter
   
Roberto Chedraui Design and Prototyping of an AC-AC Converter for an Inductive Power Transfer System
   
2020  
   
Killian De Gol Automated Measurement Data Processing for Characterization of a SiC MOSFET Based Switching Cell
   
Jonas Le Roy Thermal Modeling of the Medium Frequency Transformer for Design Optimization
   
2019  
   
Philippe Bontemps Modeling and Experimental Verification of Voltage Distribution Along Large Synchronous Machine Windings
   
Yijiang Liu Implementation of Control Algorithms for Grid-Connected Converters
   
Gilles Wicki Design and Practical Implementation of Low Voltage Solid State Circuit Breaker
   
2018  
   
Gabriele Ulissi Design of a SiC MOSFET / IGBT Gate Driver
   
Maria Chiara Rinaldi Implementation of Abnormal Grid Voltage Waveforms for a Grid Emulator and Grid Code Compliance Functions for a Grid Connected Converter, (External MSc Student: La Sapienza, Rome, Italy)
   
Maria Mercedes Salame Gonzales Impedance Measurement Methods: Comparison, Benchmarking and Practical Application to AC Systems
   
Marc Ferrer Digital Control of a Renewable Energy Resources Interfacing the Distribution Grid, (External MSc Student: ETSEIB, Barcelona, Spain)
   
2017  
   
Didier Ansermet Modular Multilevel Converter for MVDC Application: Study of Converter Design and Control Behavior, (MSc Thesis in Industry: ABB, Turgi, Switzerland)
   
Julien Orsinger Control of Variable Speed Drives – A Study on Modern Control Implementation Using a Rapid Prototyping System, (MSc Thesis in Industry: IMPERIX, Sion, Switzerland)
   
Mathieu Grossenbacher Solid State Switch for 3kV DC Railway Applications, (MSc Thesis in industry: SECHERON, Geneva, Switzerland)
   
Danijel Matejevic Passive Components for Medium Power Converters: Evaluation of Electrical and Thermal Performance, (MSc Thesis in industry: CERN, Geneva, Switzerland)
   
Maria Papamichali Superconducting Magnet Power Supply with Integrated Energy Storage, (External MSc Student: TUM, Munich, Germany)
   
2016  
   
Antoine Giraldi Medium Size Discharge Capacitor Digital Control, (MSc Thesis in industry: CERN, Geneva, Switzerland)
   
Clément Michaux Design and Prototyping of a Three-phase Converter for a Power Electronics Teaching Setup
   
Luca Sburlino Lifetime Investigation of Electrolytic Capacitors in Power Cycling Applications, (MSc Thesis in industry: CERN, Geneva, Switzerland)
   
Marko Petkovic Design and Development of R2E-LHC600A-10V Back-to-Back System, (MSc Thesis in industry: CERN, Geneva, Switzerland)
   
Pierre Fechting Modelling and Control Design for Wind Generators, (MSc Thesis in industry: ABB, Bäden-Dättwil, Switzerland)
   
Raphaël Schaller MMC Cell Control SW Implementation and HIL Testing
   
Robin Chevalier Robin ChevalierRealisation of a Diagnostic Tool Using Case-Based Reasoning, (MSc Thesis in industry: EDF, Chatou, France)
   
2015  
   
Emilien Luc Henry Coulinge Power Electronics Building Block – Design
   
Marko Mogorovic Investigation of the Hybrid Front-End Solution for High Performance Medium Voltage Drives, (MSc Thesis in industry: ABB, Turgi, Switzerland)
   
Nikolas Zbären Power Electronics Building Block – Protection
   
William Herkens Galvanic-Isolated Auxiliary Power Supply